Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

First Lathe

Posts

First Lathe

#1

First Lathe

Robert L.

>I would like to get a mini-lathe this year but I do not even know where to begin.

I would like the best variable speed mini-lathe (price is not an issue but space is), any thoughts which model??? My first thought is the Jet variable speed mini-lathe that I have seen at several shows being used by demonstrators who liked it very much.

I have a very basic set of turning tools already...what else should I ask for? I would hope that these accessories and tooling will be intervhangeable for a larger lathe that I am sure I will step up to later. I hate to buy tooling twice...

I would like to start using it to turn small spindles, knobs, and tool handles.

Re: First Lathe

#2

Re: First Lathe

Ron McKinley

>I've had the Jet Mini VS for over 2 years and I highly recommend it. They have a newer model, I think, with a 12" swing instead of the 10" I have.

In addition to what you have now I recommend a good sharpening jig/system such as the OneWay Wolverine or Penn State System plus a 4-jaw scroll chuck. The Barracuda 2 from Penn State is a good one.

In addition, welcome to the VORTEX or BIG BLACK HOLE of woodturning! .....Ron

Re: First Lathe

#3

JL

Re: First Lathe

JL

>The Jet mini is a good place to start - especially with a bed extension. How about the Jet 12" x 20"? It has a more powerful motor (3/4 hp) even though it isn't a variable speed.

Another thought is the General "Maxi-lathe" which is variable speed with a 3/4 hp motor. Bed extensions are available.

Re: First Lathe

#4

Re: First Lathe

Robert L.

>The 12x20 is nice but in this size lathe, do you need 3/4hp? I do not intend to turn large bowls...of course I say that now...

Re: First Lathe

#5

Re: First Lathe

Robert L.

>The 12x20 weighs in just under 100lbs...this is just getting too heavy for me to lift up and down as this unit will not be in a permanent home. It is not yet available in VS either although it does have a bed extension.

Re: First Lathe

#6

Martin Harris

Re: First Lathe

Martin Harris

>Robert:

I went through this exercise in June and ended up with a Jet Mini 1014 with variable speed. I had no previous wood turning experience, so had to buy everything.

I really like the lathe and also had modest ideas about its use. However I scored a large amount of wood from a neighbor, and projects have changed.

I enjoy riding the lathe across the floor when working on a new, unbalanced log, although once it is round the lathe is very smooth. I wish I had bought a somewhat larger lathe to start with - am now budgeting for an upgrade in the middle of next year.

I got the Barracuda 2 chuck (mentioned in another post)and find it very versatile.

Whatever you get, you are going to have a blast. Wish I had retired 40 years ago!

Re: First Lathe

#7

Re: First Lathe

John Kyler

>I know Rockler will is having a sale on the Delta Midi for $200 but they are giving a $100 gift card back. So the lathe costs $100...

I think Dec. 1st and 2nd.

You might look at that one.

Re: First Lathe

#8

JL

Re: First Lathe

JL

>If weight is a consideration then go for the Jet VS - the General would weigh too much. As far as needing a 3/4 hp? Well... it definitely helps. Definitely with bowls and larger spindles (lamps and large legs). My $0.02.

Re: First Lathe

#9

Re: First Lathe

Barry Turner

>You can't beat the Jet mini for a starter lathe. I probably wouldn't bother with the variable speed model. When you are turning smaller items like pens, ornaments and boxes, speed control is less important and can be accomplished easily and simply by moving the belt from one pulley step to another. What else to ask for? A chuck. Maybe a Nova G-3 or Oneway Talon. Then you'll be set. For a few days, at least.

Re: First Lathe

#10

Re: First Lathe

keith zimmerman, Normal IL

>You can't go wrong with the Jet Mini VS. I've had mine for almost 4 years now and the only issue I've had is that I had to replace the on/off switch. Cost about a buck and a half. Not bad for almost four years of almost daily use.

The Jet 12" might be worth looking at when they come out with a VS version. Until then, I am very happy to work on my Mini VS.

You would not be sorry if you decide to go that way.

keithz

Re: First Lathe

#11

jet mini vs

robert davis

>

Re: First Lathe

#12

Re: First Lathe

Robert L.

>Hi John,

For the money I would seriously consider this; however, I was not able to find anything on the web about it and I don't have a catalog. Any chance you can share the catalog code and model number.

Thanks.

Re: First Lathe

#13

Re: First Lathe

Russ Babbitt

>If you want the best look at the Oneway "mini" or a Vicmarc VL100 if you can find one. The Oneway goes to down to zero rpm and I have two VL100's with DC motors and controllers that also go down to zero rpm.