Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Turning mesquite

Posts

Turning mesquite

#1

Turning mesquite

Terry Alexander

>I have a farm in West Texas. Lots and lots of mesquite.

I have a combination of some very large (and dead) mesquite trees and I have an ample ;-) supply of live mesquites that I can cut down.

Would the wood be any good for turning bowls and/or pens? If so, should I use the "old dry" mesquite or cut down a live tree and use the fresh (green) mesquite.

Any and all advice is appreciates.

As always...TIA

Terry Alexander

Re: Turning mesquite

#2

Re: Turning mesquite

Carol - now in NC Nebraska

>You may get a whole bunch of 'send some to me' posts. Then you will be in the mesquite business! Your 'customers' will tell you whether wet or dry. :)

So let us know how much you want for a Priority Mail box full.

Line up behind me, folks!

Re: Turning mesquite

#3

ebd

Re: Turning mesquite

ebd

>The Mesquite that I have turned (received in wood exchange) is wonderful stuff. I'd use the dry first and let the live keep growing till you run out of dry.

Re: Turning mesquite

#4

Re: Turning mesquite

Stuart Johnson

>My favorite wood is Mesquite so yes it is well worth using. I've used it dry for segmented work, pens, bottle stoppers, seam presses, seam rippers, dibbers and other items. Green, it is very stable and makes great hollow forms and bowls. The worm holes and cracks can be handled with epoxy and inlay or dye. Of course the scraps are all saved for the smoker.

Now for a waste of money use. Even here in Red Oak, Texas, where Mesquite is not plentiful but not hard to come by, Brookshire Brothers sell little tuna fish size cans of Mesquite chips for the BBQ. The things sell for over two dollars a can. Based on that when I smoke a brisket I burn up a several thousand dollars worth of wood.

Re: Turning mesquite

#5

Re: Turning mesquite

Barbara Gill, Remlik VA

>I love Mesquite wet or dry. I usually turn it wet to finished. It is very stable and really beautiful.

I save the scraps for my husband's cooking. As Stuart said it is great for smoking.

Re: Turning mesquite

#6

Re: Turning mesquite

tek-Brunswick, Ohio

>Green and dry mesquite both have their uses. Green mesquite has more color variation between the sap wood and the heartwood. It makes great natural edge bowls. Here is a picture of one I turned. Notice that the bark runs deep into the wood. I had the other half of this log fly apart on me while turning it. Luckily the pieces missed me. Mesquite is heavy and hard flying pieces could be hazardous! I hate to see trees cut down just for a few turnings though.


img

Re: Turning mesquite

#7

Ric Taylor

Re: Turning mesquite

Ric Taylor

>Terry,

There is nothing wrong with the dead mesquite. Both green and dead it is a hard and very stable wood. Use up what has already died and let the live trees continue to grow. It is beautiful for any project, pens or bowls or anything else, and polishes nicely with a great grain.

Ric

Re: Turning mesquite

#8

Re: Turning mesquite

JohnKJordan in East TN

>>Line up behind me, folks!

Terry,

I'm in line if you decide you want to sell some. I like 2"-4" turning squares at least 6" long which are easy to mail. I've never had any real large, mostly little pieces.

JKJ

Re: Turning mesquite

#9

wonderful turning wood, easier wet

robert davis

>

Re: Turning mesquite

#10

Re: Turning mesquite

Bill Hale / The Wood Spinner

>It is my favorite wood to turn. It finishes great either oil or urithane type finish. It does darken with the oil, I use walnut oil, and makes it very rich looking and velvity to the touch.

One thing to be careful of is that sometimes the croches are deeper than they appear. As you turn you can runout of connection to the two sides. BAM

Good turning and be safe

Bill in CG, AZ.

Re: Turning mesquite

#11

Re: Turning mesquite

jwoodwright

>Please put me "on the list" as well. :-)

I'm a pen turner and getting into larger turnings...

Re: Turning mesquite

#12

Re: Turning mesquite

keith zimmerman, Normal IL

>I really enjoy turning mesquite. I just haven't turned enough to actually have an opinion as to how or when to turn it. But, as others have said, use up the dead before even thinking about touching the living. Anyone that receives some it will be forever grateful to have just received it, myself included.

If you decide you want to start a venture to market the wood, count me in as a potential customer.

keithz

Re: Turning mesquite

#13

Re: Turning mesquite

eaglesc

>Any nasty looking Diseased burls?

They should be removed immediately as well as the roots.

Re: Turning mesquite

#14

Re: Turning mesquite

Fog Tanner

>I live on the other side of Texas, in the eastern portion. I get Mesquite from all over Texas when I can (Have Trailer, Will Haul). I turn either green or dried, mostly dried these days as I still have some peices in the stack. There are several varaiations around the state, resulting in different colorations. Mainly from the soil variations. The Mesquite I have from Central Texas, will like be different in color than yours, but still mesquite.

It is a wonderful wood to turn green as it does not move very much. The first bowl I made was from green Mesquite and it is still round. For boxes and pens, I let it dry. I rough turn the boxes and set them aside for a few months. Pen blanks, I just cut into boards or sticks and set them aside like the boxes. There are a number of us in the Houston area (fairly large area) that turn bowls and everything else from Mesquite.

It is best to get to the dead mesquite pretty quick. It will usually pick up some livestock and the less grazing they can do the better off you are. If you do get there a little late, the "trails" (i.e. holes) can be filled with coffee and glue and will look like they belong there. When you run out of dead mesquite and start looking at the live stuff, since you don't have to haul it very far it is best to only take what you can turn quickly for the critter reason.

I once asked Raffan about cutting a piece of Mesquite crouch I had. It was at a workshop and took the log in my van. First thing he asked was if all Texans carried their wood around with them. The second remark was "why would you turn anything else, this is God's wood"... so according to Raffan's thoughts, you probably have a lifetime supply of turning stock ....

Re: Turning mesquite

#15

Oh No!

tek-Brunswick, Ohio

>I'm unworthy!

" The second remark was "why would you turn anything else, this is God's wood"

Re: Turning mesquite

#16

Re: Turning mesquite

Chip in Plano

>I'm in for a trunk full. Let me know and I'll bring the chainsaw and wedges too.

Re: Turning mesquite

#17

Re: Turning mesquite

John Pickett in Denton

>Where in West Texas? I'll be out with a chainsaw and help you get rid of all that nasty old stuff. =P If you ever get to Fredericksburg in early October, be sure to go to the mesquite show on the marketplatz there.

Re: Turning mesquite

#18

The line.......

Rick Davenport

>is getting longer.

I hope you don't run out before you get to me.

Want some Pacific NW woods in trade?

Rick

Re: Turning mesquite

#19

Re: Turning mesquite

Wally Dickerman in Arizona

>Hey Folks, grab all of the mesquite you can get. It's the most stable wood in North America and it's very nice stuff to turn. Around here, most of the native trees are Palo Verde and mostly Mesquite. If I want mesquite at a very low price I visit the places that sell firewood. They sell it at cordwood prices.

Wally

Re: Turning mesquite

#20

Re: Terry, I live in

Allen Neighbors

>Childress. I'll donate a day of help cutting it, for a few pieces. No kidding. I also love to turn Mesquite... Dead or Green... It's wonderful!

I can get a lot of it around here, too. Just having some from a different area would be nice.

Tek (Tom)... The yellowish sapwood will remain longer if the wood is cured inside, away from the bright, hot, Sun. I have a domino box that I made from green mesquite. The lift lid still fits, and the sapwood is still pretty yellow.

Have fun!