Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Finish on bowls

Posts

Finish on bowls

#1

Finish on bowls 

Stephen Cramp

>Hi all, I've been lurking here for a bit since I got a lathe a couple of weeks ago. I've not turned since Gr8 and that was many, many years ago.

Anyway, I've made five bowls so far and have a question about finish. All of the bowls are made from a plank of cherry I had sitting around. The round one is the first one I made and is done with tung oil I got from Home Depot. The second one I made is the plain square one is also tung oil. The other square one with the jatoba strips is my fifth turning (I did a couple in between out of apple I took from the firewood pile) and is unfinished which is why I'm asking what to use.

Will the cherry darken over time with the tung oil? Is something like walnut oil better? Should I use a vegetable oil?

Thanks for any assistance.

Steve


img

Re: Finish on bowls

#2

Re: Finish on bowls

Mike Schwing from Maryland

>Welcome to the club!

1. Yes, the cherry will darken over time, regardless of which clear finish you choose. (if you paint it, who knows!) You may hasten the process by setting the pieces out in direct sun for a few hours. Works fast and great. Also, you can brush Drano on the cherry and watch it darken before your eyes. Be careful!

2. Tung oil is great. Walnut oil is the only true oil that dries on its own but it can be very, very yellow and you might not want to add yellow color to your piece. Tung oil is processed in such a way that it, too will harden and dry in the presence of oxygen. Stay away from vegetable oils, IMO. They can go rancid and never really dry. (I dislike mineral as well). Behlen salad bowl finish is a great alternative to using tung oil. Give Watco Danish Natural a try sometime.

Re: Finish on bowls

#3

Mike said it all.

Brian Hahn in SW Wisconsin

>

Re: Finish on bowls

#4

Mike said it all and......

Barry Irby

>Those are good looking bowls for your first ones since Gr8. I can't wait to see what you do with a little practice. Keep them coming.

Re: Finish on bowls

#5

Re: Finish on bowls

Troy German

>Steve,

All three of these look great. Tung oil should work well and does a good job bringing out the figure in the wood (as you can see).

Thanks for posting.

Troy