Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Wood Demonstration

Posts

Wood Demonstration

#1

Wood Demonstration

Derek Dix

>A friend of mine is a Delta sales representative. He has asked me to do a demonstration at one of his clients stores. He is providing me with a Lathe, Drill Press, Bandsaw and Dust Collector. I have never done a demo before but am nervously looking forward to it. I will be there for three days so will have lots of time to turn. Do you have any suggestions for fun give away things to turn. I was probably going to make some ornaments seeing as it is pretty close to Xmas and maybe a few pens. But am more concerned about Finishing and Safety.

Thanks Derek

Re: Wood Demonstration

#2

Re: Wood Demonstration

Mike Brazeau

>Turned tops are always a hit. Prepare a bunch of blanks ahead with flat stock and 3/8 or 1/2 dowelling or turn from solid hardwood stock. Some coloured markers and a chatter tool will enhance tops as well. Another item is bottle stoppers. Ornaments take a while, but obviously are a good hook for this time of year. I wouldn't venture further than some friction polish and wax for finishing. Good luck.

Re: Wood Demonstration

#3

Re: Wood Demonstration

JohnKJordan in East TN

>Derek,

How about some finger tops? Granted there may not be many kids there, but there will be parents and grandparents.

Tops are real quick to make. I start with about a 6" blank at 1" or more held at one end in a chuck, then turn several tops, one after another, spinning tip and body first, finish that, then finally the handle.

I have made hundreds of these and they are always popular with both kids and adults. The kindergarteners love the new challenge of trying to make them spin; I've had groups of adults crowded around a table trying to learn how to spin them upside down; had the director of the Oak Ridge National Lab sit on a laboratory floor and spin tops with me. Good clean fun!

JKJ


img

Re: Wood Demonstration

#4

Re: Wood Demonstration

john lucas

>When you make the tops do some chatter work or do coloring with pens. Everyone seems to really like that.

Re: Wood Demonstration

#5

Re: Wood Demonstration

Doug Turner

>Baby rattles, bottle stoppers, magic wands, small lidded boxes.

Re: Wood Demonstration

#6

Re: Wood Demonstration

Derek Dix

>Thank you those are some good ideas. I have three days at this store so I am not too worried about how long it is going to take to make something.

Will let you know how it goes and maybe some photos.

Derek

Re: Wood Demonstration

#7

Re: Wood Demonstration

Rick Allen

>Do you have to give stuff away? If not then turning green wood and making shavings fly will be a big hit with folks.

There is something about making a big mess and the smell of freshly cut timber that appeals to a lot of people. If all you did was rough turn bowls folks would be enthralled with your demo. You can supplement roughing bowls with finish turning some roughed out bowls which have dried. That will provide the cradle to grave process.

Aromatic woods work great, pear, cherry, apple, olive, cedar.

Good Luck and have fun.

Re: Wood Demonstration

#8

Ric Taylor

Re: Wood Demonstration

Ric Taylor

>Derek,

I recommend you rig up some sort of safety shield, like a clear sheet of plexiglass mounted in a frame to put between the lathe and the viewers. Children tend to get in really close, and all of a sudden their little faces are about 12" from that spinning wood.

Ric

Re: Wood Demonstration

#9

Re: Wood Demonstration

Carole Valentine

>Derek, you have 3 days, but remember the folks watching you don't. They maybe have an hour or less. I would try to make a number of things that can be completed in that time frame. Of course stages count too - roughing out a green piece falls in that category as does finishing a previously roughed out piece. Other things like various ways of mounting work is of interest as well to your viewers.

Re: Wood Demonstration

#10

A good demo prop...

Clem Wixted

>...is to take a finished object, such as a bowl, and have 3 or 4 intermediate steps of the bowl in various stages of completion. This would give a good visual of a cut blank to a finished bowl while you spray shavings for it's dramatic effect. You might have a number of different finished turned products to show potential customers what they too, can make when they buy a:

lathe

Tools

Sharpening system

Dust collection system

Sandpsper

Finishing items

Project kits

Wood

Hollowing system

etc.

etc. :-)

Then turning some tops would break the monotony for you and be a good giveaway.

Don't forget a good mat to stand on for three days :-)

Clem

Re: Wood Demonstration

#11

Re: Wood Demonstration

Bill Grumbine (Kutztown PA)

>Derek, I am going to second what Rick Allen wrote. If you go with the intent of making small things to give away, you will indeed draw a crowd, a crowd of people waiting for you to give them something. Then it is work, and factory work at that.

I have demonstrated in all sorts of venues, and nothing is as much fun as throwing shavings all over the place. That also draws a crowd, and it is fun for them too. Don't make one giant bowl, make a bunch of smaller ones so people can see the process without a huge investment of their own time. It is amazing how many people have no idea how this stuff happens, and who are completely enthralled at what you are doing. There is no work involved - unless, of course, they make you sweep up afterwards! But wet maple shavings coming off the lathe will draw people who would not think twice about stopping to see something else, and you don't have the pressure of a line of parents and kids waiting for their handout.

Now, having written that, I know how much fun it is to make things and give them away, but I have seen the other side of that as well. Especially for your first demo, you have enough to worry about with out that.

Good luck with it. If you get demonstrating into your blood, it is hard to get it back out again!

Bill

Re: Wood Demonstration

#12

Steven Antonucci

Great idea

steve antonucci

>I like the idea of having the intermediate steps, and I'd add that a whiteboard might overcome some of the hazards of turning a bigger piece.

For example, chainsawing a blank can be covered easily on a whiteboard, not so much in the store.

The whiteboard is also a great place to make your list on when you progress through the demo...

Steve

Re: Wood Demonstration

#13

Re: Wood Demonstration

tek-Brunswick, Ohio

>Those are all good ideas. Not all types of Christmas ornaments are time consuming though. Snow men are fairly easy to turn. Turn the hat separately and you can make it out of dark wood and put it on at an angle. Use puff paints that come from a craft store for details. Black, for eyes and buttons and orange for the carrot nose. At a Nick Cook demonstration he made a Snowman icicle ornament. Just stretch the lowest segment of the Snowman into an icicle shape. My wife really likes. those. Here is a picture of a Nick Cook style snowman made out of Holly.


img