Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Turning Video - Selection

Posts

Turning Video - Selection

#1

Turning Video - Selection

Greg Deavers

>Could I possibly get a "list" of favorites to choose from along with your Opinions? I would like to spend about $75-100 or so, to acquire 2-4 videos (if possible) from Beginner+ THRU Experienced/Advanced techniques.

Currently, I have a Delta Beginner video, and Wood Turnging Wizardry -David Springett (beyond my skill level). I want to expand my resources so I can expand my skill level.

I appreciate your input. Thanks very much!

Greg Deavers

Re: Turning Video - Selection

#2

Re: Turning Video - Selection

Ron McKinley

>Bill Grumbine's two DVDs are excellent as are Jimmy Clewes'......Ron

Re: Turning Video - Selection

#3

Re: Turning Video - Selection

eliot d

>You should think about getting our own Russ Fairfield's three set DVD's on finishing. It's the best source for finishing turned wood that I know of.

Re: Turning Video - Selection

#4

Bill Grumbine's DVD's

Steven Kubien

>I cast another vote for Bill Grumbine. I haven't seen the second but there is a ton of info on #1. It'll keep you spinning happily for a while.

My 2 cents

Steve Kubien

Re: Turning Video - Selection

#5

Re: Bill Grumbine's DVD's

GaryG in MD

>The second one is as good as the first. Highly recommended. ...Gary

Re: Turning Video - Selection

#6

Re: Turning Video - Selection

Gordon Seto

>Grumbine and Clewes are my choices too. Next would be Alan Lacer on skews.

I belong to two Clubs. One of them has a good collection of turning videos. I purchased some also. I have almost watched the majority of videos. These two have the best camera angles for us to watch the close up shots and they are intended for us to learn from.

On some, you will only benefit when you are already advanced to intermediate level.

On some, they are just show off and infomercial to their turning classes.

Some are information overload, the mono tone would put you to sleep.

Don't overlook the freebies from Oneway and Sorby. They have good information on using their turning tools.

Gordon

Re: Turning Video - Selection

#7

Make it three!

Dominic Greco in Richboro PA

>You couldn't go wrong with Bill's DVD(s). I have both and really enjoy watching them. I learn (or re-learn) somethng new each time. The DVDs are so engaging that even my wife will sit and watch them with me.

Dominic

Re: Turning Video - Selection

#8

Re: Make it three!

Tim GC

>Mine too. Thats saying something as I normally cannot drag her away from studying for a break ... (training to be a Podiatric Surgeon)

She thinks Bill is a big teddybear really (I didn't say that)

Re: Turning Video - Selection

#9

Re: I heard that!

Bill Grumbine (Kutztown PA)

>

Re: Turning Video - Selection

#10

Re: Turning Video - Selection

TomCollins

>I have been watching some videos and dvd's by a guy named John Jordan;). "The Aesthetics & Properties of Wood" really opened my eyes on selecting wood, grain placement, wood movement, etc. Not one lick of turning on the 2 dvd set but I sure learned a lot. I have also been watching his "Bowl Turning" and "Hollow Turning" videos. Lots of lathe time and lots of good information. I'll have to buy my own copies if Santa is good to me this year!

Tom

Re: Turning Video - Selection

#11

HI Bill! How do I get your videos?

Greg Deavers

>Address, cost, etc?

I would like to get them this week as I am vacating.... and have time to learn!

Re: Turning Video - Selection

#12

Is "WonderfulWood.com" your site Bill?

Greg Deavers

>Are your videos named "Turned Bowls Made Easy", and "Beyond the Basic Bowl"?

I found them on WonderfulWood.com if this is the correct site, I will order them today.

Thank you all!

Re: Turning Video - Selection

#13

Re: Is "WonderfulWood.com" your site Bill?

Cyril Griesbach

>That is, indeed, the correct site and titles. I also have them both and they are wonderful.

Re: Turning Video - Selection

#14

Never Let Down Yet!

Greg Deavers

>You guyz are GREAT! I really appreciate your input, thanks very much!

Greg

Re: Turning Video - Selection

#15

Re: Never Let Down Yet!

Don in Central Illinois

>I can only coment on the ones I have which are Bill G's first DVD, Lacer's 'Son of skew' and 4 of J. Clewes (the last three came for my birthday last Saturday) Haven't made it all the way through the last three but I'm working on it. Also, I have the DVD that came with the Ellsworth Gouge that Santa brought last year. All are excellent.