Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

I despise my chainsaw!

Posts

I despise my chainsaw!

#1

I despise my chainsaw!

eliot d

>I won't give the brand( but it's supposed to be the best one.) I hate it with a passion! It never starts! I use just-pumped gas with 50:1 mixture(i.e 50 parts gas to one part oil) of the proper chain saw oil. I just went miles to a site to cut up some freshly-felled logs only to come back with nothing because I couldn't get it started. I hate it! (But now I feel a little better.) I know others don't have his problem. Do you have any advice?

Re: I despise my chainsaw!

#2

Re: I despise my chainsaw!

Frank J

>Yes.. its just like the saw I wise I didnt have

Re: I despise my chainsaw!

#3

Re: I despise my chainsaw!

Gary Evans Tallassee, TN

>How old is your saw, Eliot?

Might be something as simple as needing a new spark plug. 2-stroke engines are notoriously hard on spark plugs. The other thing may be that the carb just needs to be tweaked a little. Colder weather requires a richer mixture for proper performance, particularly when starting. Sometimes the choke is not sufficient to richen things up enough if the adjustment screws are in too far. Saws tend to come from the factory adjusted to the lean side of things.

Another possibility if the saw has a few years on it and it sits most of the time is that the pumper diaphragm in the carb could have a split in it.

Gary

Re: I despise my chainsaw!

#4

Re: I despise my chainsaw!

Dennis Daudelin

>Lately mine is like that too! It's a big name brand and a top model.

I think that it's mostly due to the fact that I only use it once a month or so. When I use to cut wood for heat and used it almost daily for 20+ years, I didn't have this type of problem.

I've also been told that Ethanol is not the kindest thing for a saw!

So, my opinion is using it more frequently!

And an annual tune-up doesn't hurt either!

Dennis

Re: I despise my chainsaw!

#5

Re: I despise my chainsaw!

russ Fairfield

>Have you thought about taking it to a dealer and having it fixed?? That be a better thing to do than asking an Internet forum to fix the problem.

Re: I despise my chainsaw!

#6

Re: I despise my chainsaw!

Darryl

>Elliot one thing that will cause a hard starting saw problem is the fuel filter. It is a little stone fixture attached to a plastic hose in the gas tank. When the stone gets clogged nothing will start the saw. Make a hook of a coat hanger and pull it out. You can get anew one at any small motor shop.

Re: I despise my chainsaw!

#7

Re: I despise my chainsaw!

pfduffy

>Time for a little maintenance! How old is the gas? How much Stabile has been added? NOne? Oh, my goodness! Take the thing to the local dealer and tell him you want a tune up. My "2nd class" saw starts on the 2nd pull, every time. Philip

Re: I despise my chainsaw!

#8

Re: I despise my chainsaw!

JohnKJordan in East TN

>Are you using the proper starting procedure? My Sthil 250 does not want to start unless I follow a sequence, then it starts every time. This works for me: full choke, pull until it blips once, flip off the choke and pull rapidly three times. It has not yet failed to start on the third pull.

Also, make sure the air filter is clean and as Gary said, try a new spark plug.

While the spark plug is out, check for a good healthy spark to make sure the coil is working correctly.

See if the plug is wet with gas, if so, it may be flooding. Here's an old trick - remove the spark plug and heat it with a flame (or run it in a second chain saw till hot, if you have one), then install it quickly and try to start.

But if I continued to have problems, I would certainly take it to a good shop or take it back if it's new. I once bought another Stihl and it was temperamental starting, so I returned it.

JKJ

Re: I despise my chainsaw!

#9

Re: I despise my chainsaw!

Carole Valentine

>Maybe start your saw up at home before you drive miles only to find it won't start? (Of course it still may not start when you get to the site, but the odds are better that it will.) If it won't start at home, drive to your dealer instead of the wood lot. I am really not being sarcastic here. I never have a problem starting my Stihl, but I always start it up and run it for a few minutes before I leave for a wood site, especially if I haven't used it for a while, just in case.:)

I am assuming your saw is a Stihl - you did say it was supposed to be the best. It shouldn't be hard to start and your dealer can probably save you a lot of frustration.

Re: I despise my chainsaw!

#10

Aage Rendalen

Burn out the fuel every time

Aage Rendalen

>I just bought a new Stihl 290 to replace one that was stolen this summer. I got it from a Stihl dealer and their advice is that you pour all remaining gas back in the canister when you're done, then fire up the saw and let it run on the fumes until it dies. This way, they say, you avoid ethanol-related build-up in the carburator and kindred problems. Don't leave gas in the tank.

Re: I despise my chainsaw!

#11

Re: I despise my chainsaw!

eliot d

>Thanks for all the responses. Yes, it's a Sthill. I have taken it in to the shop on several occasions. They always seem to get it started all right. My problem in the past was usually old gas. So I learned to put new gas in it. I guess I'll have to do what several of you have said and ask the dealer to actually tune it up.

Re: I despise my chainsaw!

#12

Re: I despise my chainsaw!

Walter Ahlgrim

>When you buy Fuel you are buying perineum?

I put the first gallon in the car to purge the line of all low test fuel. Then fill the saw can.

It is a very bad idea to run a two cycle engine out of fuel, by definition out of fuel is a lean condition.

Lean conditions can very quickly overheat the piston and cylinder often melting the piston.

Walta

Re: I despise my chainsaw!

#13

Re: I despise my chainsaw!

Dick Coers

>Also check the fuel line itself. If it has a crack away from the filter/pickup end, it will pull air instead of gas and make it a hard starter.

Re: I despise my chainsaw!

#14

Re: I despise my chainsaw!

Texian

>Eliot,

Only saw one ref. in this thread to use of fuel stabilizer. Do you use it? Suggest use of Sta-bil or equivalent fuel stabilizer in all small engine fuel all year round. Keeps the gas from turning into goop during the "off" season.

Actually probably ok to dump the gas and run it dry if you are not trying to cut at the same time. But running out of fuel while cutting at full throttle and max cutting load can indeed melt a piston.

Re: I despise my chainsaw!

#15

Your Chainsaw Is Your Friend ! ! !

Barry Turner

>I have a 3-year old Stihl Model 361. It's a great saw and I've had no problems with starting. It only gets used a few times each year, which is not good.

The manual calls for premium fuel. Always use fresh gasoline and always replace the spark plug at least once a year. I avoid ethanol blends.

My saw has the one-lever-does-it-all setup. If your's has the same arrangement, make sure you are setting this lever properly. You have to pull the saw throttle while setting this lever to the start position. The lever holds the throttle open a bit and also sets the choke. This lever is also the kill switch.

If I do it right, my saw starts on the second or third pull, even if it's been sitting for a few months. Once it's been started, it starts on the first pull almost every time. If yours doesn't, take it to the dealer for a tune-up. While you are there, make sure you are using the correct start-up procedure.

Considering the intermittent use and skimpy maintenance that most turner's chainsaws get, a good electric makes a lot more sense. Getting a cord long enough to reach the woods could be a problem, though.

Re: I despise my chainsaw!

#16

I love my chainsaw!

tek-Brunswick, Ohio

>I have Stihl around 20 yrs old. I screwed it up once by putting chain oil in the gas tank. I used to open both the chain oil and the gas tank at the same time to fill them. In my hurry I poured the chain oil in the fuel tank. I tore it down and did my best to clean it up and flush the lines and tank. It didn't run right after that. I took it into the shop and admitted my stupidity. It ran better, but still didn't have the power it should have. I took it back to the same shop for a tune up and had the same result. I went to different shop and was looking to buy a new saw. I talked to the salesman and told him what happened. He told me his technician had been working on stihl saws for oven 20 yrs and would be surprised if he couldn't fix it. He got it to run like new. My point is not all shops are the same. Sometimes you need to try more than one and only open one tank at a time.

Re: I despise my chainsaw!

#17

Re: I despise my chainsaw!

Carole Valentine

>The Stihl oil has stabilizer in it. Is there any need for additional?

Re: I despise my chainsaw!

#18

Re: I love my chainsaw!

john lucas

>I thought I was the only one who put gas in the oil and vice versa. Like you I was in a hurry. It started ran a few minutes and quit. Then I realized what I had done. I took it to the shop and they cleaned it all out and told me that eventually I would have to have some seals replaces and an overhaul done. That was about 5 years ago. My Husky is still plugging along but it takes about 10 pulls to start it when cold. Once it's warm it starts on about a 1/2 a pull every time.

Re: I despise my chainsaw!

#19

Re: I love my chainsaw!

Bill Crommett

>Remember that regular gas is made with "dirty technology" and will gum up a carburetor faster than premium.

Re: I despise my chainsaw!

#20

Re: I despise my chainsaw!

eliot d

>I didn't use premium, but it wasn't regular gas, either. I used what's in between. I believe the octane was about 90. As I said, I plan to get the saw looked at, but I may try changing the spark plug, at least, first.

Russ, as usual, is right , of course. I should just take responsibility and get the thing fixed. My post, and (most of your responses) makes me feel better.

(I could take Russ even more seriously if only he could appreciate Glen Gould!)

Re: I despise my chainsaw!

#21

Technique on buying small quantity of premium

Pete in Holland

>The light came on last summer.

You pull up to the gas pump, chose premium, then fill your 1-2 gallon gas can, at a higher cost per gallon, I might add. What about all the Regular still in the hose and all the way back to the switching valves? It'll take a while for the Premium to really get to your gas can. Buying small quantities of premium may yield a lot of Regular in your gas can.

Standard procedure has since been put the first gallon of "premium" in my truck's tank, then continued to fill the chainsaw gas tank. Have seen some improvement on the performance of my little Husky.

Re: I despise my chainsaw!

#22

Re: I despise my chainsaw!

Texian

>Carole,

Probably not, especially if container directions indicate not, and the chainsaw is your only small engine. Having several small engines, both two stroke and four stroke, that are fueled from the same gas can, easier for me to add Sta-bil to the gas can as soon as it arrives home. If I recall correctly, the Sta-bil container suggests double the dose for extra long storage, like a year or more. So seems unlikely that an extra dose of stabilizer would hurt anything.

Note that this and my earlier post may, or may NOT, be correct for use of E85 or whatever (gasoline/alcohol fuels).

Re: I despise my chainsaw!

#23

Re: I despise my chainsaw!

Matt Prusik

>To stop the stale gas problem, dump in some fuel stabilizer. It claims to save the more volatile elements of gasoline for 6 months or so. But on and off, I have used it for years with no problems.

I have an ECHO 12" and POLUAN 20". The POULAN is tempermental starting. But I usually get it to go after a few minutes. The ECHO is my love. Runs on the second pull every time ...

If only the rest of my life was so easy ...