Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Two bowl platter.

Posts

Two bowl platter.

#1

Two bowl platter.

Bill Hale / The Wood Spinner

>Now this was fun, spooky, to turn. I forgot to note on the pic that it is 2 in. thick.

Critiques welcome and wanted

Bill in Casa Grande, AZ.


img

Re: Two bowl platter.

#2

wow

GaryG in MD

>That's great Bill. I can just hear it. Very nice.

Did you use weights or just let 'er rip? ...Gary

Re: Two bowl platter.

#3

Re: Two bowl platter.

Ray Binnicker

>OK, now I'm impressed !!!! You are a braver man than I. Seriously, I'm sure you are very confident in what you're doing; I'm not there yet. Again, IMPRESSIVE.

Ray Binnicker

Re: Two bowl platter.

#4

Re: Two bowl platter.

Dennis Daudelin

>Wow is right!! Is your lathe bolted down or did it walk across the floor?

It's a real beauty!

Dennis

Re: Two bowl platter.

#5

Re: Two bowl platter.

Barry Elder

>Very impressive, WoodSpinner!

Re: Two bowl platter.

#6

Re: Two bowl platter.

Bill Hale / The Wood Spinner

>Oneway at about 1000 lbs and bolted down. No counter weight just a little slower than I usually turn.

Thanks Bill

Re: Two bowl platter.

#7

Re: Two bowl platter.

George Van

>I�m glad I reread your note Bill, I�m embarrassed to say I was looking at you finished bowl as the bottom wondering what the face looked like. Talk about feeling stupid! Must have spent too much time in the deer stand today ;-))

It looks like it was the type of turning that held your attention all the while it was spinning. The finish gives it a warm look. I am curious why you chose the two different style bowl forms?

I also have been impressed with the stability of my Oneway when I roughed an off center 20x27x7 birch burl this summer and vibration was not a problem at the speeds I chose to turn. I believe the wide foot print helps a lot.

Re: Two bowl platter.

#8

Re: Two bowl platter.

Barry Turner

>You're not depressed are you? If I turned something that large and that much off-center.......it would be suicide! That is a wonderful piece......I'm just not that brave! Very nice!

Re: Two bowl platter.

#9

Mike Stafford

Incredible Bill, and beautiful...

Mike Stafford

>

Re: Two bowl platter.

#10

Re: Two bowl platter.

jpickett

>Is your lathe anchored into bedrock? That's scary! Beautiful, but scary. LOL