Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Bill G's trip to DC - pic 1

Posts

Bill G's trip to DC - pic 1

#1

Bill G's trip to DC - pic 1

GaryG in MD

>It took me a week to find the time to deal with these pix, and Bill is off on his next trip already, but I thought I'd go ahead and post them now anyway. These are from the CAW meeting in which he did three pieces: a NE bowl, a "banana" bowl, and a "bowl through a plank". The latter two were impressive propellers, as you will see.

This first shot is Bill answering a question about the nearly completed NE on the Stubby.


img

Re: Bill G's trip to DC - pic 1

#2

Re: Bill G's trip to DC - pic 2

GaryG in MD

>For the "banana", Bill has mounted a small branch between centers and is working on the bottom with his 45/45/45 cut.


img

Re: Bill G's trip to DC - pic 1

#3

Re: Bill G's trip to DC - pic 3

GaryG in MD

>Bill is now beginning to hollow the "banana". He is doing it in stages from the rim to the center in order to keep mass in the center for as long as possible. Gotta watch those edges.


img

Re: Bill G's trip to DC - pic 1

#4

Re: Bill G's trip to DC - pic 4

GaryG in MD

>Hollowing coming along nicely. You can see right through the propeller.


img

Re: Bill G's trip to DC - pic 1

#5

Re: Bill G's trip to DC - pic 5

GaryG in MD

>Ready for the chocolate sauce!


img

Re: Bill G's trip to DC - pic 1

#6

Re: Bill G's trip to DC - pic 6

GaryG in MD

>Can you see the smile on his face as he mounts this plank between centers for the square-winged bowl? Yeah, this is gonna be fun.


img

Re: Bill G's trip to DC - pic 1

#7

Re: Bill G's trip to DC - pic 7

GaryG in MD

>This thing sounded like a Piper Cub on takeoff. I will say it cleared a little more space in the line of fire. Very pretty as the bowl develops.


img

Re: Bill G's trip to DC - pic 1

#8

Re: Bill G's trip to DC - pic 8 of 8

GaryG in MD

>This is as far as he could go because we ran out of time before he could do the hollowing. That's OK, we got the idea.

Thanks Bill. That was fun. ...Gary


img

Re: Bill G's trip to DC - pic 1

#9

Bill G's trip to DC

Julie

>Great Pics

Thanks for sharing

Re: Bill G's trip to DC - pic 1

#10

Re: Bill G's trip to DC - pic 1

Barbara Gill, Remlik VA

>Gary, those are some of the best pictures of Bill that I have seen. You really captured him well. I bet his family would like copies.

Re: Bill G's trip to DC - pic 1

#11

Re: Bill G's trip to DC - pic 1

Jennifer@Indy.USA

>Barbara, I was thinking the same exact thing. Bill you look happy as a clam :) Great photos.

Re: Bill G's trip to DC - pic 1

#12

thanks Barbara...

GaryG in MD

>Yes, I'm pleased with them. The camera did its thing, and Bill was very photogenic. (I can't say too many good things about my Canon Digital Rebel XT DSLR and image-stabilized zoom lenses.) I plan to send Bill those and more. ...Gary

Re: Bill G's trip to DC - pic 1

#13

Re: Bill G's trip to DC - pic 6

Chip in Plano

>How did he chuck it?

Re: Bill G's trip to DC - pic 1

#14

Re: Bill G's trip to DC - pic 1

Allen Neighbors

>Awesome photos! I have a question about pic 7/8: Do you have any idea what the rpm was when you took these shots? Looks like about 1200 or so...

Thanks for posting these!

Bill... Good Demo... and I wasn't even there. :)

Re: Bill G's trip to DC - pic 1

#15

Re: Bill G's trip to DC - pic 6

GaryG in MD

>Chip, If you look REALLY closely at pic 6, you can just make out what looks like a dark shaft. You can see it much better below while he is mounting the banana bowl branch. It's a spur drive. He pounds it into the wood with a mallet and then chucks it up. That gives him flexibility to modify the angle if necessary. He turns a tenon on the base and chucks that when he reverses to hollow. ...Gary


img

Re: Bill G's trip to DC - pic 1

#16

the other end

GaryG in MD

>Chip, Here's a 'detail' of a photo showing the chuck end of the spur drive. ...Gary


img

Re: Bill G's trip to DC - pic 1

#17

guestimate

GaryG in MD

>Thanks Allen, Glad you enjoyed the pix.

My short-term memory is starting to get a little iffy, so I like to shoot photo essays -- then I can go back and see what happened! ;-) I also enjoy sharing them.

Re the speed: the Stubby is continuously variable, and Bill just sets it where it feels good, so it could have been anything. The CAW Stubby is mobile, and on that particular day they were having a problem finding a good level spot on the floor, so it was vibrating a bit. Bill had to contend with that, and it might have kept his speed a bit lower than it might otherwise have been.

I shot Pic 7 in shutter-priority mode and purposely slowed the shutter down to 1/20 sec to get a few full revs to make the shot look like that. I have another shot, at 1/125 sec (below), that looks like roughly 1/8 of a rotation to me (given the width of the board). Doing the math, that works out to 1020 rpm. That seems a bit on the slow side to me. I have yet another photo (not shown) that provides a higher value, but it's too hard to estimate the fractional rotation accurately enough. So your guess of 1200 is as good as any.

...Gary


img

Re: Bill G's trip to DC - pic 1

#18

Re: the other end

Chip in Plano

>Gracias, that was a perfect response with pictures.

Re: Bill G's trip to DC - pic 1

#19

Re: Bill G's trip to DC - pic 1

Bill Grumbine (Kutztown PA)

>Very good photography Gary! That is quite a feat, making me look good like that. I should get my hair cut more often, eh?

Bill

Re: Bill G's trip to DC - pic 1

#20

Re: Bill G's trip to DC - pic 1

Bill Grumbine (Kutztown PA)

>Thanks Allen! I am not sure how fast the lathe was going, but it was over 1000 rpm, but a little slower than I would have turned it. There were two reasons for that. First, the lathe was on a bump in the floor, and they were having a little trouble with the feet. Second, there was a dramatic dismount of the previous piece, so I dialed it back a little to keep things a little more sedate. That was one of the most attentive after lunch crowds I think I have ever seen though.

Bill

Re: Bill G's trip to DC - pic 1

#21

Re: the other end

Bill Grumbine (Kutztown PA)

>Chip, just to add a little more info, the drive center I was using is a Oneway chuck spur. I have used regular spurs held in the chuck, and I have a Texas spur center that I really like from Best Wood Tools, but the Oneway can really be seated well for pieces like this where you don't want to worry about them coming loose. That is not to say they won't...

But it helps, and this is my current favorite for NE bowls and such.

Bill