Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Good thread on the flat side *LINK*

Posts

Good thread on the flat side *LINK*

#1

Good thread on the flat side  *LINK*

Ron in Drums PA

>


Safety

Re: Good thread on the flat side *LINK*

#2

Re: Thanks for posting this...

Allen Neighbors

>I have quit flatwork, but the suggestions Ellis makes are sure... We all need a wake-up call once in a while... this is for now.

Hope he gets fixed up...

Re: Good thread on the flat side *LINK*

#3

Re: Good thread on the flat side

eaglesc

>Ellis, I pray your friend has the best recovery possible and can get back into his shop soon.

I have not made a "flat work" project in 3&1/2 years.

That being said the tool I use the most in my shop on a daily basis is the tablesaw.

I use a Grizzly 10" Contractors saw in just about all my blanks one way or another.Most recently in making my own "tooth pick" sized wood for a segmented inlay.

My Cardnal rule is one that Ellis mentioned in his thread.

"If it doesn't feel right don't do it."

I use a lot of jigs that enable me to make cuts so that my hands are not on the piece being cut directly, and rarely within 3 inches of the blade.I do not use a blade guard because of the exclusive use of a sled both for rip and cross cuts.

I am more comfortable with a table saw than any other tool in the shop.(escept for a pencil and a scale)

Thanks for pointing us to the thread Ron.