Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

How long did it take...?

Posts

How long did it take...?

#1

How long did it take...?

Jack Savona

>I was invited at the last minute to do a juried craft show this weekend. I have a corner booth near the entrance, so I'm hoping for some good traffic (and sales). However, many people seem to ask: "How long does it take to make a bowl?" I don't know if it's just curiosity or they are trying to decide why the prices are what they are.

I'm thinking of printing the following and having it in my booth to save me some time with the obvious NON-buyers? Whaddayathink?

HOW LONG DOES IT TAKE TO MAKE A BOWL?

Before I answer that let me ask:

Are you counting the time it took �

�locating those special logs?

�loading them and transporting them to my shop?

�coating the logs to prevent them from cracking?

�stacking and covering the logs until needed?

�chainsawing the individual log into slabs?

�rounding the slabs on the bandsaw

�recoating the rounded blanks for storage?

�selecting a blank and deciding on the design, proportions, etc.

�roughing out the bowl on the lathe?

�soaking it afterwards to minimize cracks and distortion?

�letting it dry for at least 3 months, periodically checking it?

�re-truing the distorted bowl on the lathe and carefully turning it to final size and thickness?

�filling any voids or cracks?

�meticulously sanding it to 800 grit or more?

�adding any embellishments?

�finishing off the bottom?

�buffing the bowl with both Tripoli and white diamond compounds?

�applying 4-6 coats of finish over a week�s time?

�waiting for the finish to cure?

�buffing again with both Tripoli and white diamond compounds?

If you�re not counting much of the above and the bowl doesn't badly crack while drying or come apart when it's turned, the answer is�

It really doesn�t take much time at all.

Re: How long did it take...?

#2

Re: How long did it take...?

Tim GC

>Oh Yeah!! thats got most of it I think ... would you mind if I copied it?

Re: How long did it take...?

#3

I'd like to use it, too (with credit)...

Rick Urban

>on my website and when I show. May we?

Re: How long did it take...?

#4

Re: How long did it take...?

russ Fairfield

>There are 2 reasons for people asking. The first is because they are curious and don't know the process. The other reason is they have heard too many woodturners who are too willing to brag about their skills and how fast they can make a bowl. How many times have you heard a woodturner say, "These aren't difficult at all. I can crank one of these out in less than a hour."

Either way, they are trying to justify the price tag into something they understand. Nobody objects to your making a reasonable income from your work, but sometimes they really want to know what they are getting for their money. Sometimes need a no BS answer to their question.

Re: How long did it take...?

#5

Re: How long did it take...?

Philip Morris

>Jack, looks good. A couple of other possible items.

- Photographing the item

- Documenting the sale

- Associated IRS accounting

I also print up a numbered certificate of authenticity that contains a picture of the item, type of wood and where it came from, along with care instructions. I print it on photographic paper at Wal-Mart and then sign it.

Re: How long did it take...?

#6

According to Bruce Baker...

James McClure

>That's a permission question in the 4 parts of making a sale. If you're not familiar with Bruce Baker, check out his web site:

http://bbakerinc.com/

I don't have any affiliation with him. I attended a seminar that he gave recently and was very impressed.

Re: How long did it take...?

#7

Re: According to Bruce Baker...

john lucas

>I agree with Russ and James. A lot of times it's simply a way to open up the conversation with the artist. I'm a lousy salesman but this is a golden opportunity to involve them in the process. Start telling them a little about what you just wrote down (which I'm going to file away for future use)

My Glass friend likes to tell them 18 years and 2 hours. it took 18 years to develop the skill and 2 hours to make. That's a little blunt for some people. I've been to 2 Bruce Baker workshops and they are well worth the money. I know I've missed a lot of opportunity's to sell because I simply don't know what to say to turn simple question into a sale.

Running a woodworking business is 33% promotion, 33% sales and 33% paperwork. The rest of the time you get to work on wood. :)

Re: How long did it take...?

#8

Door opener

Jack Savona

>I unconditionally realize that the question posed to me is a conversation enhancer. And I welcome the question from a potential buyer or a truly interested party AFTER they've shown an interest in my work.

But when the FIRST question is about how long it takes, I know it's a waste of time. I'm thinking more about the guy dragged around by his wife who has no interest in my turnings but asks the question: "So how long it take ya ta make one-a these things?" I hate to get tied up with him at the expense of not noticing an interested party or not greeting the person who's passing by and giving a lingering glance.

And if my initial post is useful to anyone else, please feel free to copy/modify it. Consider it full public domain.

Re: How long did it take...?

#9

Re: Door opener

Ruth Harding

>I like it though I have some reservations about the initial tone. The two lines after the question may be harsh for the person who is genuinely interested. Changing the question to something like 'what steps are involved in making a bowl' is less harsh.

Suggestions for additions would be:

sharpening your tools

maintenance of your lathe - it can take a while to clean off all the shavings and dust if you don't have a compressor

time to source craft shows

time it takes to set up the booth

time it takes to answer questions like this.

I am going in my very first craft show in December so I haven't yet experienced the joy of lots of viewers asking me the question. I might change my mind about the 'harsh' wording afterwards.

Thanks for sharing it with us.

r

Re: How long did it take...?

#10

Re: Door opener

Tim GC

>I must admit I looked at the list as humorous. I would not consider placing it in any way on a display area or sales table however to have a few little cards with it on may prove beneficial. Give it to the kiddie when dad asks the question. Kid can then impart his knowledge upon parent without you having to ....

Re: How long did it take...?

#11

Re: I have to agree that Bruce Baker...

Jamie Donaldson

>... is a good sales talker but a lousy photographer!

Re: How long did it take...?

#12

Re: How long did it take...?

Barry Irby

>Well, first I had to work at my other job to save enough money to buy a lathe. Not the lathe I have now, but the one I had before the one I had before the one I have now. My father gave me the chain saw I use to cut the trees. I'm lucky, he also lets me cut some of his trees, free. Then there were all the tools, and the grinder and learning to sharpen them. It was frustrating to learn they don't even come sharp. You have to sharpen them even before you start and you really don't know what they do at that point. Then I joined a turning club and paid for lessons. I drove to Atlanta to see some guy from Australia. I pay the club to bring more people in to help me refine my (our) skills. I spent a week at Arrowmont with a guy they named after a chisel. Then a block of wood flew of the lathe and hit me between the eyes. Those 27 stitches cost me $1300, so I kept the bowl I was working on as a reminder not to do that again. Now that I think about it, If I add this to the list of things you mentioned, I can't possibly sell bowls for enough to make money at this. I need to raise my prices. Its the best hobby I ever had.

Re: How long did it take...?

#13

Why bother?

Stuart Johnson

>First off I don't sell so I am not asked this type of question. But, if customers asking all sort of questions like how long to turn, what do you use it for, can I put it in the dishwasher cause such anguish and in some cases rude answers why do you bother doing shows? Instead take your work to high end galleries and stop dealing with the unwashed masses.

When I first started turning while on a trip I stopped to visit a turner that does some very nice segmented items. I had no idea how to construct a segmented piece and tried to ask some question. One was the time involved. I received the 18 years and two hours type BS answer. By the way this was at his shop by invitation not at a show. I thanked him for his time and left.

Re: How long did it take...?

#14

Re: How long........?

Mark Mandell - Gone Round In Jersey

>I'd keep it simple and direct . . . "4 Months"

That may turn a mildly interested person into one truly interested in the entire process. Then you can go into the search, harvesting, roughing, soaking, etc. bit. if they become engaged in the process. Throwing a list of the steps and stages as a function of time at them in a sign bespeaks a bit of attitude by someone who is getting tired of answering the "dumb" question. I think it will be more likely to push customers away rather than engage and educate them.

"How much time" questions are often a prelude to dicker on price. The guy sees $100 on a bowl and you tell him 6 hours, he's calculating $15/hr in his head, and may offer you $10 per hour. If, however, you tell him 20 hours, he may just buy it right there because his calculation come out to less than minimum wage, so the bowl must be a bargain. Because the large majority of wage-earners are paid by the hour, it becomes a sort of measuring stick for value and price.

After you talk about the steps, some will specifically come back to a particular item with something like "Interesting, never thought it was so involved. So how much actual time do you have in THIS cherry bowl?" Which is your clue to say, "You know, I can't actually tell you how much time any particular actually took to do." That says "The price is $100, friend, and worth every penny and more."

Now, if you'd like to put up a sign explaining, perhaps including pictures, all the various stages (so you wouldn't have to give the teacher-speech 50 times per day), that, in the form of education without attitude would, in my view, be more worthwhile as it will build value without actually mentioning a price measurement.

mm

Re: How long did it take...?

#15

Re: How long did it take...?

Gary Evans Tallassee, TN

>Hi Jack,

It seems that your purpose is to brush off the non-buyer, but the problem is that you don't know whether he/she came to the show with one or more others who ARE looking to buy. If he/she perceives some attitude on your part, you might end up losing sales rather than freeing up your time to deal with "better" prospects.

I've done a lot of woodturning symposiums. Many times the person who says that they have more wood than they can turn, that you spend 15 minutes being nice to, ends up coming by later and buying. Besides, if your initial impression is that they are not a buyer, you can always politely ask them to wait while you deal with someone who has money in their hand.

If you do decide to use your list, I'd leave off the part about filling voids and cracks. You certainly don't want to say anything about your work that could be interpreted in a negative light by the uninformed.

Gary

Re: How long did it take...?

#16

Re: Good response, Mark!

Allen Neighbors

>

Re: How long did it take...?

#17

Agree and....

Thomas Skaggs, Foothills of Mount Level

>It pays to answer questions...even the seemingly annoying ones. You never know when a "pest" might really be an interested paying customer. Sometimes they want to get to know the artist and if they feel that connection they are more warm to buying.

That said, at recent shows I have been to (or been in)I am seeing more and more folks setting up computers in their booths that have Power Point shows about how they make things. It seems like a great way to demonstrate the many processes and allow people to visualize the complexities of the craft.

Tom

Re: How long did it take...?

#18

Re: How long did it take...?

Jorge Castaneda

>Jack,

I went trough this recently, the next show I brought in a round billet rough looking, green and heavy, and I made a sign, asking the people, how long do you think it takes to get from here to a hansomely finished bowl? "hint wood dries at the rate of 1" a year".

Many people read that and just shake their heads affirmatively the few who asked "what do I get if I answer correctly" I said " Why, you get the log"... we both got a good laugh and one of these persons bought a couple pieces.

Re: How long did it take...?

#19

Dick Hines

Re: How long did it take...?

Dick Hines

>About 1/4 the time it takes to sand, finish and buff a bowl.

Re: How long did it take...?

#20

Steven Antonucci

A sales primer-

steve antonucci

>Perhaps the most clearly misunderstood misconception in the owrld is that if someone asks you a question you need to answer it. If someone walked into my booth and asked me "How long?", I'd respond with the following:

"Hmm? I get that question a lot. Why are you asking it for if you don't mind me asking?" It's completely disarming, and usually so unexpected that their only response is to answer it. You now know what they want to do with your answer and can respond accordingly.

If that seems to confrontational, you can play with it:

"Oh, are you a turner too? How long does it take you to make a bowl?"

or

"How long do you think it took? No, go ahead, guess... most people guess low."

and so on...

Steve

Re: How long did it take...?

#21

Thanks...

Rick Urban

>This has been a *very* interesting and insightful thread. Thanks for starting it!

It's such a frequent question, and if we are in the market place to receive it we are trying to sell our pieces. Each of us tackles the next day with our own perspectives, and it's valuable, and sometimes embarassing, to be reminded of the important viewpoints we may have missed.

Most of what each of us needs is already in the thread, so I'll just say thnaks.

Re: How long did it take...?

#22

Re: How long did it take...?

john pickett

>That answer is a great answer if the question comes from

1) a capitalist, because to that person time is money,

2) a craftsman, they want to know if they have time to do it at home

but if the questioner is a philosopher (and they're the only ones worth talking to) my answer is simple: 55 years. 8-)

Re: How long did it take...?

#23

Re: How long did it take...?

Atwerz

>Jack the 2 questions you asked have just a touch of sarcasm or being cutesy I think. At least it comes off that way to me. May say "Consider these required steps to wind up with this beautiful bowl" 2 cents worth

Re: How long did it take...?

#24

Re: How long did it take...?

eaglesc

>I get asked the same thing about some of my pen blank designs.

My answer varies on the intricacy of the blank.

I would imagine a simple truthful answer is the best.

"it can take months up to a year(?)"

Also add that you work on more than one bowl at a time and each piece is in different stages of completion based on size, design and species of wood.

I would also add that finishing the bowl takes more time than turning it.

You might also add that since you are working with a natural material that all pieces do not make it to the finishing stage.

I.e. blow ups, do not meet your standards.

Re: How long did it take...?

#25

I'm with you on this too.

Jennifer@Indy.USA

>I agree Mark, as annoying as it may seem and perhaps as you say a prelude to someone wanting a "deal". We never know exactly how much time we put into something we make. Unless, we are true production turners and most of them have it down to the minute. It's the attitude you want to avoid. That skates me out of a someone else's booth faster than anything. When I buy something at an art/craft show I have to feel good about not only what I'm buying but also the maker. If they have an attitude forget it.

Jen