>The AAW Board has just announced an exciting challenge for all current AAW members: Membership Drive - your chance to go to the 2008 AAW Symposium FREE !!
>What is the AAW doing to specifically increase membership - other than to send out these notices?
This 'drive' primarily serves chapters, not the general membership. I honestly don't know what I would say to someone about joining the AAW other than you get 4 great magazines a yr and if you make the annual symposia you annual vacation then you will have a great time in the trade show.
How about getting member discounts at key dealerships?
How about posting ALL events that happen around the country so that travellers know what's happening and can attend?
How about regular raffles for 1 week instruction?
How about focusing on paid members rather than kids?
How about ......well there is lots of things that could be done to attract greater numbers.
I believe if AAW really does want to increase membership they should come up with a drive that ALL members can participate in, not just those who belong to clubs.
>Actually Ruth, assuming that you are planning to go to the 2008 symposium, all you have to do is to ask 5 people in your club if they want free membership in the AAW for the next year, just to try it out. Then, you pay for all their memberships. As best as I can make out, membership costs $45 per person (if you have any students in your club it is even less), which is a total of $225. I believe that the last convention cost $275 per person. So, assuming that you were planning to go to the Virginia convention (and that it is going to cost the same as last year), and are already a member, you come out $50 ahead!
Even if you are a non-member, you still come out ahead.
>Ruth, there are a lot of things a lot of organizations "could" do and they get a million suggestions from their members. I've even suggested a few.
Your suggestion of the AAW getting members discounts at key dealerships isn't very reasonable.
Who would compensate the dealerships? They are not AAW members nor owe members anything. Also all key dealerships offer very nice discounts at any symposium they pay (quite a bit) for vendor booths.
The only thing I would like to see the AAW do at the national symposium is take some of the kids money to give us old people FREE coffee! (I'm going to get free coffee in the morning if it kills me!!!) LOL : )
>While it's not included in Ed's link, there is also a notice that the banquet facility will hold only 1700 people and they are expecting more than that. So.....the banquet ticket will cost extra next year and will be on a first come first ticketed basis. That should cut that $50 savings from paying for your 5 new members by quite a bit.
In most of th tradeshows that I attend, the convention sells sponsorship for "free" breakfasts, and usually announce who sponsored (paid for) my free coffee (or lunch, or cocktail hour...)
I'm actually going to a show in Orlando in two weeks that the sponsors are paying for everything. I feel compelled to listen to what they have to offer otherwise I wouldn't bother going, but when they've paid the way, I'll sit down with them. A lot of people won't even knowing this...
>I have to agree with Ruth. I've been a long time member of the AAW but it's kind of a hard sell when I'm discussing it with members of our club. It's not cheap to join. Maybe on some budgets but it's getting to the point that I have to ask myself is it really worth that much.
The magazine is great but if that's all we go buy it's more expensive than any other magazine (other than Woodturning from England).
I can't afford to go to the National symposiums unless they are very close and I save for a year. Even then it's mighty tough. I agree with Ruth a list of all regional symposiums would be nice but I can usually find the ones close enough for my budget anyway.
The Free CD's they have been giving are a good step.
I thnk the AAW has really helped woodturning and without it I don't think we would have the clubs we have and the group insurance helped us find a place to meet. That can be explained to a future member but most want to know exactly what benefits do I get.
You get the directory but honestly how many people actually use it. You get it in the mail, look through to see if there are any new people near you and if your address is correct and then it goes on the shelf.
You do get discounts on AAW CD's and books but again how many of us have bought them.
>All she did was express her opinion. Highlighting a word or increasing the letter size is like screaming at someone which is rude. There is no need for that.
>Ok, a free registration... What about a second level, the person that gets the most new members, gets free airfare or motel etc..?
As for the discounts, they work to get membership at least locally. I know many people that are guild/club members that join just to get the discounts at the store I work at. They are not active in the club, but pay membership for the card to get the discounts of 10%. But then how could the AAW do this on a Nationwide basis?
I'am a member of a local club and the AAW. When I worked nights and was not able to go to my local club I decided to join the club in Colorado Springs. At the time and maybe still, you had to be a member of both. Now I'm back at my home club, and they don't require it. And even some members say they just cant afford to be a member of both. Not sure how many would really drop out if it was required to be a member of both.
The insurance for the club and the demonstrators is a good thing.
I think the AAW magazine has improved so much over the years that the membership is worth it just for that among the other benefits.
Sad as it sounds I'll duck down now and with bullet proof jacket on.
>I know a couple of forums that have arranged discounts for their registered members. Some of the companies include CSUSA, Klingspor and Northern Tool.
I asked the same question that Ruth Harding did about discounts for AAW members. The answer I received was "Yes, we have a list of companies that offer discounts to AAW members"
I said "Great! Do you have the list on your website? If not, how do I find out who they are?"
>The AAW is sending out Announcements? To whom would they be sending them? Are they not preaching to the choir?
I found it stunning that they decided to put the symposium in Richmond, VA (where my local club is) without finding out if we were interested in having it. Now our club leaders are hammering on us to volunteer. The problem is that there are so many slots to fill, each of us would have to take four or five slots.
And, even if you take a number of committee positions and invest a huge amount of time, apparently you do not get to attend free or even get a discount. (Wait, let me get this straight, you want me to man the ticket booth, after having assembled 1700 packets, and pay for my ticket too? How about if I don't give myself a packet and take a minute off to go to the bathroom?)
As far as a discount for kids or family memberships? Well somebody did an impromptu survey and to know ones surprise it turned out that most of us are fifty and older. Perhaps it would be smarter to give a discount to people under fifty. Or set up the gerontology wing of the AAW. If I join another club I am going to make sure the news letter does not have an obituary page.
>John, I believe what you say that people make that statement about "cannot afford both", but if money is that critical to them how do they justify being into woodturning? I'm speaking of hobby, not those who do some turning as their income.
>of woodturning. Why is it always "What's in it for me?" Any money beyond what I get back I regard as a donation for the good of woodturning and all who are part of this community. There will always be cheapskates who ride on somebody else's nickel, but why must they always whine? Vendors are entitled to a fair profit. Many are generous beyond all reason. Some, like Ruth Niles, are even pretty. And some aren't. [grin]
Let's encourage folks to join up and be part of the community. Remember the Three Musketeers, "All for one, and one for all!"
If your club is an AAW chapter, that is fine, but there is no requirement for all of the members to be AAW members also. If your club has that requirement, it is strictly a local club rule. If that were the case in my club, I would be talking to the officers very quickly about getting that changed. That can be a real financial burden on some people, resulting in reduced membership.
By the way, I am a member of my local club and also AAW.
One of the main benefits of being in an AAW chapter that many seem to be not aware of is the insurance coverage for club meetings and for demonstrations. We all know how quickly someone can receive a serious injury around a lathe.
>I belong to four AAW chapters. I helped found one chapter and I'm a past president of it, I founded a second chapter and I'm the current president of that one, I'm active in the AAW and fully support it and in no way was I put off by what Ruth said, in fact I agree with some of her statements.
She's entitled to her opinion and shouldn't be shouted at.
>For reasons of liability our club requires that anyone who does a club demo or demos at a public club event be an AAW member. It is an AAW requirement that officers be AAW members.
Why are people so negative about being an AAW member? It's a GOOD thing to belong to our national organization.
>All officers of an AAW chapter must be AAW members, beyond that there is no requirement for AAW membership. Having said that, after AAW checks for AAW membership of local officers signing the local by-laws, I doubt they ever check again.
One of the chapters that I belong to has Level A and Level B membership, level A requires AAW membership and offers added benefits.....along with higher dues.
>Ed Don't get me wrong. I like the AAW and have gotten a lot of it, and have given a lot. many woodturners are into this just as a hobby and don't really feel like they need to support woodturning. The same things goes when talking about youth in woodturning. I think it's important to woodworking as a whole to try and get the youth involved but many people simply want to do this as a hobby and don't want to teach or feel inclined to support woodworking as a whole.
As far as expense. This can be an expensive hobby. Many people,especially those on a fixed income, are stretching resources to buy new tools. Also many don't subscribe to a lot of woodworking magazines so this is an expense they don't necessarily want.
I belong to 3 clubs and I'll bet less than 1/3 are AAW members. Probably way less than 1/3. My argument is simply what do we tell them are the benefits that they can see. Discussing things like, the AAW grant allowed us to buy cameras, or the AAW insurance has helped us meet in this place, or they are promoting woodturning to the youth of america, or you get a discount to the symposium. These things don't really mean much to the beginning woodturner trying to do this as a hobby. They want real benefits or they will spend that $50 on a new tool.
>One of the local Woodworkers guilds has gotten a discount at a couple of local lumber dealers - 10% off any lumber for guild members. You can also get discounts at "member days" for one of the local dealerships for tools (also 10%).
>I am a charter member of AAW. I've belonged since the very beginning. I've belonged to 4 different clubs and have been a part of forming 2 of them. I've seen the magazine go from a mimeographed newsletter that went out to the less than 1000 members, to a classy infomative magazine that goes out to over 13,000 members. As a club member there are a number of benefits. The free liability insurance is very important and would be costly but necessary, to a non member club. Our club recently received a $1500 grant from the AAW. We spent most of it on our library. Books, DVD's etc. Individual scholarship grants are available. Several people in WC have received one and have taken week-long classes. Any member who has attended an AAW symposium will agree that they are well worth while. I've demonstrated in several in the early days. Except for the big name turners who earned their living with woodturning, we volunteered and did it for nothing. The AAW in the early days struggled and a couple of times almost went under.
Folks, if you are a woodturner the AAW is well worth what it costs.
I don't belong to a club. I live on a small island just off Vancouver BC mainland. The only club in the area meets only in the evening. Due to ferry times I cannot go to their meetings unless I take the walk-on ferry that leaves for the island at midnight, and pay a hefty fee to park my car on the mainland overnight.
One of my points was that there are probably a lot of people like me who are members of AAW but don't, for whatever reason, belong to a club.
As John Lucas has pointed out, there are many turners who do it for fun. There are some turners who even have to buy wood. It's a huge assumption that myself and others can afford to spend $200+ to give 5 people membership.
When I worked in CA for a while I immediately joined the club down there, The Inland Woodturners, and I enjoyed the club discounts. However, if one is not a club member there doesn't appear to be any opportunities to get discounts.