Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Photo question? Not my bowl

Posts

Photo question? Not my bowl

#1

Photo question? Not my bowl

RevDoug

>I took this pic for a friend the other day. I immediately noticed that while the center looks ok, the edges of the bowl are fuzzy. I took the pics form both distance and up close. Same effect. What's the deal? Is it simply a matter of reflection since this is a high gloss piece? Is my camera out of wack? HELP please?

Turn 'em round,


img

Re: Photo question? Not my bowl

#2

Re: There are a number of answers......

JamieD

>....to your several questions, and few of them can be well answered using the term AUTO for camera settings! Manual overrides for focus, exposure, color balance,etc. are priorities for my camera selection, and manual focus gives better precision focusing and depth of field control in situations like this example. First, back away from the bowl and use the longer focal lengths to zoom in and frame the subject, but not this tightly. Raise the camera position so that some of the rim and interior show- this gives a better informative image of the piece. Manually focus on a spot on the rim that is 1/3rd from the front and 2/3ds from the back, and manually select an f stop in the area of f11 or f16 to achieve max. DOF. This should give an image that has the entire piece sharply focused.

Re: Photo question? Not my bowl

#3

Re: There are a number of answers......

john lucas

>You have several problems and as Jamie said the Auto camera setting aren't helping. What the problem appears to be is the combination of shadows and reflections on the edges of the bowl. Turning the flash off will help the shadows on the edges. Moving the background further away might help. The edge shadows would be larger and although they won't help the photo quality it might make the edges look sharper. The background being that close is also the reflection problem. A darker background might help in this instance. Moving the background further away usually makes it darker.

Re: Photo question? Not my bowl

#4

Re: Photo question? Not my bowl

Carole Valentine

>Doug,I am assuming your original image is also much sharper than this? The resolution on this one is so low (it's only 45kb) that everything looks pixelated to me. How close were you to the piece? Many cameras will not focus properly when in close unless you use the macro setting and then your DOF is very shallow.

Re: Photo question? Not my bowl

#5

More info based on ?'s asked

RevDoug

>The pic was taken at about 7-8 feet away. I used the zoom to get it large enough that I could see some of the detail in the grain, but could still see lots of background stuff going on. I cropped to get to this final pic and then had to resize to get it small enough. It was shot at high resolution. Apparently it is resized too small, maybe?

One thing I know I need is some white material over the top and sides of my little rig. I'm guessing that I won't have nearly enough light when I do that so I better go get some halogen lights. Is 2 enough or should I get 3? Should they be halogen or would incandescent spots work? What about the little low voltage halogen spots? Would they be bright enough?

As for manual focus, only a dream for now. Wife bought this camera for us last year and ended up paying too much for it. Does good for outdoor snapshots, but for this kind of stuff I'm just not happy. Get better with my really old Cannon that I can't even see the menu display any longer.

See, this is what happens. I ask questions that bring up questions that cause me to ask more questions ... And some of you ask why I don't post more.

Turn 'em round,

Re: Photo question? Not my bowl

#6

Re: Photo question? Not my bowl

JohnKJordan in East TN

>As well as turning off the flash to remove the central glare, another thing to try: hold a white card or a piece of something reflective in front of the flash, angled to bounce the flash somewhat to the side or up. A white wall or low ceiling or piece of cardboard or something else can pass the diffused light back to the object. I usually carry a 3x5 card with me to bounce as needed when I don't carry my full pack.

How well this works depends somewhat on the camera and whether it meters or calculates the exposure.

JKJ

Re: Photo question? Not my bowl

#7

Another question ;)

Carole Valentine

>Why so far away? Just curious. I usually shoot anywhere from 1 1/2 to 2 1/2 ft. How big is this bowl?

Re: Photo question? Not my bowl

#8

Re: More info based on ?'s asked

john lucas

>You didn't say what lights you were using other than the flash, if any You don't always need more light just a tripod so you can use longer exposures. The quartz light do give you more versatitily but be sure and set the white balance to Tungsten.

The white material above and around it helps spread the light and diffuses the light from the quartz lamps.

If your camera has a function where you push the shutter button down part way and it will lock the focus and other camera settings you can cheat the focus. Put something in the scene about 1/3 of the way through. With luck the camera will focus on this. Pull that out and continue to push the shutter button to take the photo. Of course that's hard to do when your 7 feet away.

Re: Photo question? Not my bowl

#9

Re:RevDoug- I suggest you read the....

JamieD

>...Phrugal Photo tutorial here on WoodCentral or visit my website JamieDonaldsonWoodturner.com and look under the tips menu.

Re: Photo question? Not my bowl

#10

Re: Another question ;)

RevDoug

>Carole, this distance is what I normally shoot at only because that is where I've found I get the best focus. This pic just didn't want to work out though.

Re: Photo question? Not my bowl

#11

Re: More info based on ?'s asked

RevDoug

>John, the ambient lights are incandescent, mostly 75 watt bulbs, bare (without any covers). These are in my basement where I have some spare space to take pictures. I think the light balance on the camera is set to tungsten as the default. I will double check that though.

Re: Photo question? Not my bowl

#12

Re:RevDoug- I suggest you read the....

RevDoug

>My set up is much like what you have. Biggest difference is that I don't have anything on the sides or top. Maybe that's where I'm going wrong. I'll have to do some experimenting.

The Tripod I have is a second hand one I was given. It was made for a specific camera that would slide into the cradle that is on the tripod. Would there be a threaded attachment that I could put on this tripod so that I could mount my camera instead of holding it?

Re: Photo question? Not my bowl

#13

Re:RevDoug- I suggest you read the....

john lucas

>Revdoug. There were lots of tripods made that took a quick release adaptor. That sounds like what you have. If it's a common brand you may be able to find an adaptor. If it's an offbrand you may just have to make one. They are usually some sort of dovetail shape. It could probably be made out of wood. You will need a 1/4x20 knob of some sort to attach the adaptor to your camera. I've made these before using 1/4x20 counter sunk screws.

Re: Photo question? Not my bowl

#14

Re:RevDoug- I suggest you read the....

JohnKJordan in East TN

>I bought extra quick-release plates from a local photo store. I have several tripods and one uses a different design than the others, so take the tripod with you to be sure.

JKJ

Re: Photo question? Not my bowl

#15

Re: Photo question? Not my bowl

RevDoug

>Thanks for all the help and suggestions. Now we'll see if I'm able to put them into practice and get some better pics.

Turn 'em round,

Re: Photo question? Not my bowl

#16

Re:We'll be watching!!

Jamie Donaldson

>