Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

buttons

Posts

buttons

#1

buttons

Tony

>For fun (and because of a lack of motivation to tackle any of the bigger projects I should really be doing!) I started 'wasting' some time the other day turning some jewelry type stuff. It's kind of started to spiral out of control already, it's fun and addictive, working that small is good control practice for me, plus I'm getting a charge out of decorating with pigment markers, gold leaf etc.

A few people have seen some of the pins/brooches and asked if I could turn buttons--crafter types, eyes for bears and so forth. I've never turned a button (well, that's a lie, I did do one today just to see...lol) and was wondering if anyone had any information, tips, techniques etc?

And as a side question: anyone having any luck selling trinkets like pins, earrings and buttons?

Thanks.

Re: buttons

#2

Re: buttons

Jim

>There was an article on turning buttons in the AAW journal a few issues back.

Re: buttons

#3

Re: buttons

john lucas

>I've made simple buttons out of Tagua nuts and then I also do a lot of buttons or medallions that I texture with the chatter tool. I finish these and then inlay them into boxes or ornaments. They are fun and a great thing to do when I demo at elementary schools. They love the screaching chatter tool.

Re: buttons

#4

Re: buttons

James McClure

>I've done a few buttons and they are fun. The ones I did were to replace a couple of missing buttons off of my daughter's backpack. They were about 1 1/2" diameter. I started with what was basically a box blank in my chuck. I did the top design on the button, then parted it off. After that I used a scrap peice of wood and made a jam chuck to finish off the back of the button. If you are doing small buttons, you can probably get away with just sanding the back of the button flush. Drilling the holes was a little challenging and I wasn't too accurate with it. I think the AAW article that was referenced will help with that. After I finished turning them, I colored them purple to match the backpack.

I also did a set of bacgammon pieces a while back and did them in a similar fasion, however, instead of using scrap wood as a jam chuck, I made a set of soft jaws from an old UHMW cutting board. It worked great! That way, I could reverse chuck the pieces and I didn't have to be too fussy about the exact diameter of the pieces. Plus, the UHMW plastic didn't dent or mar the sides of the pieces.

Good luck!

Re: buttons

#5

Steven Antonucci

Made some for a "snowman kit"

steve antonucci

>I turned some big buttons out of maple to make a snowman kit. Instead of through holes, there was a dowel behind to stick the button into the snowman.

Steve

Copied straight out of some catalog, only mine was free...

Re: buttons

#6

Re: buttons

Doug Turner

>Before plastic was so popular I am told that sycamore turned with a flake pattern was called "buttonwood" due to its popularity for that purpose.