This is a piece of curly cherry that Dominic Greco gave me Saturday at Bill Grumbines Robust Party. This piece is 9.5" high x 6.5" diameter x 1/8 wall. The collar has a tear drop shape. Yes, it was a last minute design opportunity to save the piece. It has one coat of Bush oil on it so far. Comments are welcome.
>I'll bet that came from the tree Bill and Dom cut that was on WC a few months back? I like what you've done with the foot (glad I rubbed off on you ;-)
How did you turn it from Saturday night to today to finish? I'm assuming it's still wet, and will move a bit with that wild grain at the top?
Yes, that is a piece of the curly cherry that Dom & Bill posted a few months ago. It was some what dry but it will probably still move a little. I turned it Sunday afternoon and sanded and oiled it last night.
Normally when I am done hollowing a piece it is dry on the outside only. I power sand it to finish drying the outside and then hand sand it to 600 grit on the lathe. That allows me to put the first coat of oil on the outside. I leave the piece dry for 4 or 5 weeks then I add 3 or 4 more finish coats and Beall buff it.
This piece is curved(Catenary) all the way to the bottom foot.
>This piece looks better then the pictures. The grain and curl will pop more after I add 3 or 4 more coats of oil. It will also darken to a richer color.
>Your original post has aged to the point where it is no longer shown in the list of posts, so your new post had to become a "root" at the top of the list.
(Note that the entire thread is shown in the bottom panel for any post in the thread)