Re: Aromatic Red Cedar
JohnKJordan in East TN
>I've turned some ERC bowls and lots of small spindle projects. It's a favorite for magic wands. The wood is soft and easy to turn, BUT, some of is tears badly while other doesn't. Don't know till you try it. On badly tearing grain, I would use wax and/or a cabinet scraper while rotating. The wood seems quite stable - I get very little out-of-round.
I personally do not like a glossy finish on cedar (such as lacquer), so I usually finish with beeswax. This lets the smell come through. Eventually, of course, the smell will diminish but it can be restored at any time with a bit of cedar oil.
I do get an allergic skin reaction to very fine dust from ERC, so I have to wear long sleaves and a dust mask, of course, while sanding.
I cut a lot of cedar with my sawmill but very little for turning - most of it goes into 4x4 fence posts and 1x lumber. I happen to have my truck loaded with cedar right now if anyone local wants some. Have some big walnut as well.
I've posted the image below here before - it shows the soft finish of beeswax.
JKJ
