Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

A great weekend

Posts

A great weekend

#1

A great weekend

Steven Kubien

>I just wanted to say THANKS to Bill Grumbine for hosting a small gathering at his place this weekend. This was my first trip to Bill's and certainly won't be my last. I travelled with Steve Mushinski as we live really close by. Thanks Steve! I think the offical reason for the get-together was to christen the new lathe (and we did) but I saw it as an opportunity to meet some fellow turners, both from Woodcentral and other forums. Dominic, Andy, Ellis, Bill, Joe and everybody else, thanks for making me feel welcome. It was a pleasure.

As for the lathe itself... well, we mounted a large wet maple blank (40lbs? 50? not sure. Someone chime in) and got it spinning at about 600rpm (or was it 800? More chimes please). You couldn't hear the lathe unless you were beside it. It passed the nickel test (but failed with a loonie). We all had a go with a fresh 3/4" Thompson gouge and I can only describe my feeling as "confidence". I knew I could continue taking 1" fat shavings and not slow down. Awesome.

Thanks again everybody!

Steve Kubien

Ajax, Ontario

Re: A great weekend

#2

Hi Steve

Dominic Greco in Richboro PA

>Steve,

It was sure nice to see you as well! I had a great time messing around with that big monster of a turning machine (I mean the lathe of course). :>)

A brand new (powerful!) lathe, great friends, congenial atmosphere, fine food, and wood shavings flying all over. Who could ask for a better time?

See ya around,

My ugly mug


Dominic

Re: A great weekend

#3

Re: Hi Steve

E.T.

>So, what brand is the lathe? ET

Re: A great weekend

#4

Robust

Ron in Drums PA

>

Re: A great weekend

#5

Sure wish I was there :(

Doug Thompson near Cleveland

>I'm glad you had a good time and hope you made some new friendships. I missed this one but there are others.

Re: A great weekend

#6

Re: A great weekend

Jim Shaver - Oakville, Ontario

>Sounds like fun Steve,

I am glad you all made it down, just imagine, if I had made the trip it would have been 3 Canadians (sorry I could not accept the invitation), would that qualify as an invasion??

Post pictures please!

Take care,

Jim

Re: A great weekend

#7

Limited pics

Steven Kubien

>Hi Jim,

I think it would have only been considered an invasion if we had been carrying hockey sticks. There weren't many pictures taken and those that were are on Neds camera. I'm pretty sure Ned frequents another forum. Perhaps someone remembers which one? Ellis took some video but I'm not sure who he will try to blackmail with that.

Steve

Re: A great weekend

#8

Re: A great weekend

Jennifer@Indy.USA

>Good times Steve! Sounds like a perfect way to spend the day.

Jen :)

Re: A great weekend

#9

Re: A great weekend

Bill Grumbine (Kutztown PA)

>Steve, we were glad to see the two of you down here for the party! That blank started out at 18" in diameter and about 8" thick or so. I would not be surprised if it weighed in at 80 lbs or better, as wet as it was. We were running it at about 700-800 rpm to start.

Jim it would have been great to see you again, but your countrymen told me that they were only letting people named "Steve" across the border that day! So it is just as well you did not try.

Doug, your 3/4" vee gouge got a real workout. We were able to squeal the belt with it, but that was really pushing things. The gouge would take off as much as it could handle and the lathe was still turning, so I was very please with both.

Ned Bulken, who posts on Family Woodworking, was the official photographer du jour. I asked him if we could have a few for over here, and will post them if he is agreeable. Ellis has some video, but I don't know if he took any stills.

We really enjoyed everyone's company, and will have to do it again sometime. In the meantime, reserve some space for the end of July next year when Five Barns comes around again!

Bill

Re: A great weekend

#10

Andy DiPietro

Kudos to Bill & Lisa ...

Andy DiPietro

>for hosting another fine get-together of woodturning friends. It was fun to test drive the new Robust lathe and the monster hollowing rig.

Special thanks to Ron Sardo & Dominic Greco for trading me some fine wood. I will post some pictures after I turn a few hollow forms from that curly cherry and elm wood. Unfortunetly I did not take any pictures at the party, I was having too much fun.

Thanks

Andy DiPietro

Re: A great weekend

#11

Re: A great weekend

Doug Thompson near Cleveland

>Bill, thanks for pushing the tool. Most lathes don't have enough guts for a tool that size. IMO a 3/4V shape gouge is the max diameter for that shape. The U shape can go to 1 inch in diameter because it's used in a different way.

Have fun with your new lathe.

Re: A great weekend

#12

Re: Limited pics

Ned Bulken

>plenty of pics on their way, via Bill steve. trust me... I shot well over 100 images...

Re: A great weekend

#13

Re: A great weekend

Ned Bulken

>Folks, it was a great time! Bill check your email, you should have pics a plenty, feel free to share and use them as you need to!

Re: A great weekend

#14

Re: Limited pics

Ned Bulken

>Here you go Steve, proof positive!


img

Re: A great weekend

#15

Re: A great weekend

Tim GC

>Bill,

I have just seen the photo of you keeping an eye on your new baby ... just a quick question. How long a bed did you get?? into flagpoles now???

Stay Well

Re: A great weekend

#16

Thanks Ned

Steven Kubien

>Thanks for coming over with the pics. Also, sorry Steve and I couldn't make it by your place on Sunday. I really had to get home to relieve SWMBO who was on her own with the kids all weekend and Steve needed sleep (he works nights).

It sure was good meeting you. Hope we can do this again.

Steve Kubien

Re: A great weekend

#17

Steven Antonucci

Sorry I missed it-

steve antonucci

>Looks like you're going back into making pens, huh Bill?

For Paul Bunyan.

Steve

Planning on taking a few heavy cuts at Five Barns next summer...

Re: A great weekend

#18

Great Tool Doug

Ron in Drums PA

>I was as impressed with the Robust as I was with your gouge.

Your gouge is on the list for the next tool to get!

Re: A great weekend

#19

Re: Thanks Ned

Ned Bulken

>You're very welcome Steve. Any time you're going to be in the area, drop a line you've got my contact info now.

Re: A great weekend

#20

A few more pictures

Bill Grumbine (Kutztown PA)

>Greetings all

Ned gave me permission to post some of the pics he took, so here they are.

Photo Sharing and Video Hosting at Photobucket

Sawing up a log. This is some pretty big silver maple which I got about two months ago. The log averaged 34" in diameter. The saw in the picture is my 046 Magnum with a 28" bar on it. From left to right, Steve Kubien, Mark Kosmoski, me, and Joe Fisher.

Photo Sharing and Video Hosting at Photobucket

Here are some of us getting the wood split at the end so I don't have to worry about hitting dirt with the bar. Oh to have this kind of help all the time! From left to right, me, Mark Kosmoski, Steve Kubien, Joe Fisher. This was a multi forum cooperative effort!

Photo Sharing and Video Hosting at Photobucket

Here is our fearless leader Ellis on the lathe. We moved the headstock down and rotated the tailstock so people could work off the end.

Of course, Ellis, Dominic, and Andy D. all showed up shortly after the wood had been hauled in! I wonder if they were sitting up at the shop listening to the dulcet sounds of a chainsaw running? Andy remembered the mustard this time though, and we are talking Philly style pretzels here, not Powermatics!

Tim, I got the 24" bed extension. I was going back and forth about it when my lovely wife told me to go ahead and get it and be done with it! Including the tilt-away, that gives me 56" between centers. In fact, I got most of the various bells and whistles available. She told me the Poolewood would be my last lathe, but this time I think she means it!

Steve A, there will be a line at Five Barns I think, so you had better get here early!

Bill

Re: A great weekend

#21

A few more pics

Bill Grumbine (Kutztown PA)

>Photo Sharing and Video Hosting at Photobucket

Rounding the blank. From left to right, Harry Pye, Joe Fisher, Dominic hiding in the back, me, and Steve Kubien. For reference, the bandsaw is a Mini Max 20 and has 15 3/4" under the guides. This isn't little blank!

Photo Sharing and Video Hosting at Photobucket

Dominic gives the Thompson 3/4" Vee gouge a test drive. He is just finishing up a fairly heavy cut. See the nickel on the ways?

Photo Sharing and Video Hosting at Photobucket

Some of the show and tell stuff people brought.

Photo Sharing and Video Hosting at Photobucket

Touching up my brandy new Thompson gouge with its custom turned tiger maple handle. That is Joe Fisher looking on. I think Joe is a secret agent or something, as he managed to avoid getting his face in any of the pictures.

Photo Sharing and Video Hosting at Photobucket

Before.

Photo Sharing and Video Hosting at Photobucket

After. This is how things look most of the time in my shop it seems. Time to get the tractor and cart out again.

Thanks for taking a look.

Bill

Re: A great weekend

#22

Looked Like a Loonie

Jim Shaver - Oakville, Ontario

>Hey Bill,

What a great event and I am so happy to see you all enjoying such a wonderful gathering. Fun all around!!

But that nickel looks more like a Loonie to me,,,:-)

Take care,

Jim

Re: A great weekend

#23

Re: A few more pics

Ned Bulken

>Yeah,

You wouldn't think Joe is shy in person... ha!

I managed to find a shot or two of him... without his playing Wilson from Tooltime...


img

Re: A great weekend

#24

Now Bill...

Ned Bulken

>You didn't post two of the best images...

first one is Bill taking the inaugural cuts on that monster blank...


img

Re: A great weekend

#25

Re: Now Bill...

Ned Bulken

>and this grin says it all...


img