Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Pine for wood turning

Posts

Pine for wood turning

#1

Pine for wood turning

eliot d

>At the Yankee Symposium last summer, Dave Lancaster told me that he had turned a whole bunch of salad bowls made form pine wood. I asked him, why pine? He told me a customer wanted them and that they were great to turn. Yet I never hear about pine for bowls. What's the lowdown on pine for turned bowls -- or other turnings for that matter?

Re: Pine for wood turning

#2

Re: Pine for wood turning

Allen Neighbors

>Eliot, Pine is so soft and sappy, and it's not pretty as other wood, and it also checks pretty badly from heat, that a lot of folks don't like to turn it. It actually does make some pretty bowls, and they are light weight, too.

I'd like to have a bunch of it.

Re: Pine for wood turning

#3

Like oaks, there are a lot of pines

Keith Newton

>And from some areas, you may find some great even-textured pines that would turn pretty good, and have great characteristics. but for a lots of parts of pine country, I don't think you will find the abrupt hard-soft transition of early-late wood to be very easy, or exciting.

On the other hand, I have some rich-pine burls, that I think would have some very interesting characteristics. However, I have a reluctance to turn and sell them because of product liability. I am afraid that someone will think that, because of the translucence, that they may make a good candle-holder. Gone are the days of gathering rich-pine for the morning fire kindling.

Re: Pine for wood turning

#4

Re: Those days are still here...

Allen Neighbors

>for us, Keith, we heat our living and dining rooms with our fireplace. I wish I had some "lighter knots". :) We make fire starters... fill muffin cups with shavings and dribble hot wax on the shavings. One will light a stack of 3" dia logs. :)

Re: Pine for wood turning

#5

Re: Pine for wood turning

JohnKJordan in East TN

>In general, pine is heated to a fairly high temperature in a kiln to set (harden) the sticky sap or it will bleed out of a finshed work for quite some time and make a horrible mess. Kiln-dried blanks big enough for bowls might be hard to find.

Given the choice, I'd pick a different wood.

Re: Pine for wood turning

#6

Re: Pine for wood turning

Thad Parker in Central GA

>I've turned southern yellow pine, and had different results than expected. I roughed it soaking wet, though it was not sticky/sappy. Let it dry through a GA spring & summer with no noticable seaping, then finished it. Still no seaping pitch. I'll turn it again.

it's approx 3" x 9", & that knot on the rim is translucent.

Thad


img

Re: Pine for wood turning

#7

another pic 

Thad Parker in Central GA

>


img

Re: Pine for wood turning

#8

Re: Those days are still here...

JohnKJordan in East TN

>>fill muffin cups with shavings and

>dribble hot wax on the shavings.

Hey, thanks for the good idea! I have a lot of beeswax from the hives this year and I think I know where I can get some wood shavings.

JKJ

Re: Pine for wood turning

#9

Bill Blasic

Re: Pine for wood turning

Bill Blasic

>Here is a piece of pine I tried out the new 3520b on.


img

Re: Pine for wood turning

#10

Re: Pine for wood turning

Ed Larson

>I live in northern California with an abundance of Jeffery, Ponderosa and Lodgepole pine. These pines are not too sapply,soft and prone to tareout, lack great grain character but have been the wood I have used for practice. Its great turned wet to finished dementions and truned to a wall thickness of 10% dia and dried with shavings I have had good luck with little failure. If you have it use it. With that said here is a picture of a 6 inch endgrain Lodgepole pine bowl turned wet to final thickness that I believe has lots of character.


img

Re: Pine for wood turning

#11

Re: Pine for wood turning

Jim Shewan

>Tried a bit of pinus radiata out of the woodshed and was pleasantly surprised by the results. Its very quick and easy to turn and there was no cracking or warping. A coat of linseed gave it a wonderful golden glow and the bowl feels incredibly light.

Size is about 12in's by 3in's high.


img

Re: Pine for wood turning

#12

Steven Antonucci

Funny you should post this...

steve antonucci

>My BIL called last night to let me know that his neighbor just had a huge pine taken down, and that the logs are laying on the ground waiting for me. He claims that they're 3' in diameter and 8' long from a 150' tree (doubt him on the height...)

Might have to go for a ride, but how do you move something that big?

Steve

Re: Pine for wood turning

#13

Re: Funny you should post this...

JohnKJordan in East TN

>>Might have to go for a ride, but

>how do you move something that big?

I use the front-end-loader on my tractor to lift logs onto a trailer or my flat-bed truck. If too heavy to lift, I wrap multiple turns with a chain around a log and pull to roll it up a pair of I-beams. (This is for sawing.) The I-beam/chain method works very well with limited effort. You can do this with a comealong or by pulling with a vehicle.

To transport turning blanks, it is far easier to chainsaw first into pieces you can lift.

JKJ

Re: Pine for wood turning

#14

Maybe I'll try pine again...

Rick Urban

>I tried some last year when we had to take out some 'cause of the beetles (North GA). It was nasty sticky-sappy. Are there simply some pine species to avoid and some that are ok?

Re: Pine for wood turning

#15

Re: Pine for wood turning

eliot d

>Very interesting responses. What I'm thinking is that a fair number of people have asked me to GIVE them a turned piece. Except for some close friends and relatives , I'm not too crazy about the idea of giving away a turning made from expensive wood. So,..., confessing to my being so stingy,...perhaps I'll try some pine. Some of the PIC's here are very nice indeed!

Re: Pine for wood turning

#16

Re: Pine for wood turning

Randy G

>If it'll help make up your mind Ellsworth makes some very very nice pieces out of Beetle Kill pine. The Beetle kill makes for some interesting color and looks. Plus if you can find some very very pithy pine that can create some awesome looking pieces.

Re: Pine for wood turning

#17

Re: You're welcome, John.

Allen Neighbors

>I took a piece of particle board, used a hole saw to make 24 holes 1" apart, that a full cup would sit half-way down in (bigger, and they'll fall through when the wax hits 'em). Two dozen last as many cold days, if you let the fire die out at night.

Re: Pine for wood turning

#18

Re: Pine for wood turning

Fog Tanner

>I have made a number of segmented boxes with suctin fit lids from Blue Pine. I can genrally get 7 boxes to the log, as the logs are only 1 1/2" x 3 1/2" x 8'. But for $2.15 a log at Lowe's, I can't complain too much. You can also use Orange Pine, but I am off Home Despot these days. I had a lot of fun making them, and they turned fairly easily. I still have several glued up to finish around Christmas time.

In one of the AAW magaiznes several years ago, someone had a platter that was made from segmented boards. They looked like dimensional lumber, but I want to try one from some more Blue Pine. The glue up is pretty straight forward, with several variations available. You would need to joint and plane the logs first, but still would make a neat project. One nice thing is it will let you make a platter as large as you can swing for a couple of bucks in logs and a little glue. Also on my winter list of things to do.

You might also look around for a place that uses pine or fir in their millwork. I found a place that has short off cuts they put in a pile to be taken. They work out to be the right size for boxes and other segmented projects, and the price is most excellent. Pays to ask sometimes when you see a pile of lumber setting by the entrance. My first pine segmented box was made from wood I got from that pile. I guess that would make it FIP wood (Found In Pile)....