Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Plate with Saueracker Shell center

Posts

Plate with Saueracker Shell center

#1

Plate with Saueracker Shell center

Craig Daymon

>Here is my first project completed using the Axminster Eccentric chuck available from Craft Supplies. It is a shallow purpleheart plate with a center plug of cherry. The plug has a round bottom and the top has a Saueracker shell turned in it. (The Saueracker shell is described in Mike Darlow's second book.) It's not quite the shell as that would involve carving away to create nodes on the end of the spirals. The turning part was essentially the same.

I don't consider it to be a functional dish with its rounded plug bottom. The dish was meant to draw focus to the center plug. There is a slight rim turned in the dish around the plug.

-Craig


img

Re: Plate with Saueracker Shell center

#2

Pic 2, the profile

Craig Daymon

>The flash really hid my elaborate photo set-up in the first pic, but it is obvious in this photo. Also clipped the right hand side of the dish. A flat surface would have shown better the half ball shape of the plug. It wobbles.

-Craig


img

Re: Plate with Saueracker Shell center

#3

Re: Weebels Wobble but they

Allen Neighbors

>don't fall down. I like the idea of this... looks like a strange, inverted, flying saucer. :)

Re: Plate with Saueracker Shell center

#4

Re: Weebels Wobble but they

Craig Daymon

>One of the guys at work has already been planning test flights for me.

Re: Plate with Saueracker Shell center

#5

Re: Plate with Saueracker Shell center

Jennifer@Indy.USA

>Hi Craig,

I really like this concept. Very neat!

Jen