Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

The cradle stand (and staining) is next...

Posts

The cradle stand (and staining) is next...

#1

JL

The cradle stand (and staining) is next...

JL

>Jorge asked me to post a more finished product - so here goes.

The cradle dimensions are 37 5/8" long. The ends are about 22" or so tall. The sides are about 15" tall. The rails and ends are big leaf maple - the spindles are hard maple.

I'll be making a stand to "mount" the cradle in. The cradle will fit into two U-shaped collars on the stand so it can swing.

Cross posted on main board.


img

Re: The cradle stand (and staining) is next...

#2

Steven Antonucci

I like it

steve antonucci

>I'll admit, I wasn't sure about those spindles when you posted them, but I like it how it is right now!

I'd refrain from staining them to make it look like all the same. I think that cherry and maple look great together, and the cherry will darken while the maple stays fairly white over time.

Nice work, JL

Steve

Re: The cradle stand (and staining) is next...

#3

JL

Re: It's BLM, not cherry.

JL

>That's why I planned on a unifying stain.

Re: The cradle stand (and staining) is next...

#4

Steven Antonucci

Reading is Fundamental

steve antonucci

>Yeah, I guess you said that, but when I looked at the picture, it registered as cherry. Go figure.

Still, I like it better as a unit that I thought I would as a bunch of parts on your tablesaw.

Steve