Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Congrats to Many

Posts

Congrats to Many

#1

Congrats to Many

Jennifer@Indy.USA

>I'd like to take a moment to congratulate a few people. In the latest Woodturning Design magazine there are three articles by WoodCentral Folk. Dominic Greco wrote up a nice article on a pretty clever bottle stopper mandrel that he designed, John Lucas shares his expertise in making a Faux Ornamental Box, and Ron Sardo wrote an article on making Segmented Christmas Ornaments. I skimmed the magazine before rushing out the door so I hope I'm not missing anybody! It's always so fun to pick up this magazine and see the efforts of people that you know and spend time with on line like we all do. This place really is full of some really talented people! Also congrats to Keith for yet another nomination in the Niche Awards!

Jen :)

Re: Congrats to Many

#2

Keith Tompkins

Re: Congrats to Many

keith tompkins

>Thanks Jen....hey, you may be next!!! I wouldn't be surprised.

Re: Congrats to Many

#3

Re: Congrats to Many

Doug Thompson near Cleveland

>Jen, you should write a article about your work, it would be interesting.

Re: Congrats to Many

#4

Re: Congrats to Many

Doug Thompson near Cleveland

>Congratulations to all, we must be in the right place!

Re: Congrats to Many

#5

Re: Congrats to Many

Lan Brady

>Congrats you guys!

You are my idol of the day!

I sure wish I had not read this during lunch, now I will not be worth much this afternoon wanting to get home to see the magazine.

Of course, Dick or Earl may say I was not worth much anyhow! lol

Lan

Re: Congrats to Many

#6

Re: Congrats to Many

john lucas

>Mine just came today. Perfect timing because my Dad is visiting. I don't think he's seen any of my articles. Just read Dominics. I will definitely make one of those. I tried the hollow lamp rod filled with epoxy. Man does that work good. I turn the lathe speed down and power screw it on. Then turn it. On longer stuff you still get some chatter but easily sanded out with 180. When your done you put the lathe in reverse and power screw it off. I tried a bunch of different species from hard to soft and all worked well.

Re: Congrats to Many

#7

Thanks Jennifer

Dominic Greco in Richboro PA

>Jennifer,

Thanks for the kind words! It was sure cool getting word that my article was finally going to be printed. I wonder if my Mom will put a copy on the fridge! :>)

That spur chuck is simplicity itself to make and works like a charm. Once you make one, you can burn through a bottle stopper in no time flat.

See ya around,

Dominic

Re: Congrats to Many

#8

Thanks Jen

Ron in Drums PA

>I'm still waiting for my copy. I think it's great that the 3 of us are in there together.