Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Time for a little scoop

Posts

Time for a little scoop

#1

Barb Siddiqui

Time for a little scoop

Barb Siddiqui

>Hello turners- my work schedule keeps me too far from my shop, but one day I managed to turn this prototype of a coffee scoop, six inches long, from apple. I did the spindle turning and had to slap myself in the forehead ("what was i Thinkin'?) because the Jet mini won't let me hollow out the bowl on a six inch radius handle. Had to improvise and use a 3/8"Forstner bit and carve out the bottom. I'm thinking to make a batch for Christmas gifts, and next time I'll do it right. It was easy though..maybe easier than making a jig to trap the bowl in for hollowing out! I'll see how a 4-1/2" handle looks.


img

Re: Time for a little scoop

#2

Barb Siddiqui

Pic 2 

Barb Siddiqui

>


img

Re: Time for a little scoop

#3

Re: Time for a little scoop

Robert Henderson

>Very nice!

Be careful though. If the bowl of the scoop gets too much smaller, they'll get you for producing drug paraphernalia

Re: Time for a little scoop

#4

Re: Time for a little scoop *LINK*

Mike Schwing from Md.

>Thats cool Barb. Nothing wrong with using the Forstner. I resort to a bunch of different methods for hogging out waste from spoon interiors. A suggestion for you that might help with the spoon interiors; lacking a rotary carver, you could put a round bit such as the one linked below in a drill chuck in your lathe and make a more pleasing interior profile after the Forstner bit has done its work. You'd hold the scoop by hand while the bit spun in your lathe. You can then graduate to a finer bit that will reduce the sanding effort. Not too much danger of a bad catch or the like with such a small bit.




WoodCarversSupply

Re: Time for a little scoop

#5

Re: Pic 2

tek-Brunswick, Ohio

>Barb: I've been trying to work out a design for a scoop that I like also. It looks like you have a good start on things. It appears that the bowl of the scoop slopes down in front. That seems that it might be a little awkward to use. Have you tried using it as a scoop? Does it feel good in the hand, when being used? Let us see how you refine the idea. I'll bet that you come up with a winner.

Tom

Re: Time for a little scoop

#6

Re: Time for a little scoop

Allen Neighbors

>Hello Barb. That's a nice one, even tho you had to work extra hard to get the bowl hollowed out. I turn some on Little Vic that are just less than 5 inches long. They sell like hotcakes here at craft shows.

There's a tutorial on How to Turn a Coffee Scoop, somewhere in the woodturning cyberspace. If you google it, you'll find it. Makes things really simple. I can now turn one in about 30 to 45 minutes, start to finish... just depends on the wood.

I made a little rounded doo-dad with velcro on it to sand the inside of the bowls. I can either chuck it up, if I've removed the scoop from the lathe, or I can use it by hand when the scoop is still in the jam chuck.

Have a ball with these... they're fun to make.

Re: Time for a little scoop

#7

Barb Siddiqui

Re: Pic 2

Barb Siddiqui

>Thanks Tom. The scoop is sloped down in front because of drilling it out with the Forstner bit and leaving the edge too thin. I had to sand down to a reasonable thickness, but didn't want to lose the detail of the bulge behind the scoop, so tilted the handle off a board edge coated with sandpaper. Using a larger blank would solve that problem, as the drilling out would have more room for a thicker edge. Actually, even though it came out only 3/4 teaspoon, it works well in a coffee can. Stronger drinks need two scoops. A comment was made to me that a shorter handle would get lost reaching into a coffee can, so maybe the six inches will have to stay.

Re: Time for a little scoop

#8

Barb Siddiqui

Thanks Allen

Barb Siddiqui

>Good suggestions! My little finger got awfully scraped up forcing bent sandpaper into that hollow.

Re: Time for a little scoop

#9

Barb Siddiqui

Re: Time for a little scoop

Barb Siddiqui

>Thanks Mike; I just bought a drill chuck for the mini, that's a wonderful idea. Thanks for the help.

Re: Time for a little scoop

#10

Mike Stafford

Re: Pic 2

Mike Stafford

>Well Barb, it looks like you adapted and overcame your problem with some good old fashioned brain work. I bet you won't make that mistake again anytime soon.

What is that old adage; measure twice and cut once; or is it half the hypotenuse of the swing over the lathe bed equals one forstner bit and some handwork.....

I think you had a good save!

Re: Time for a little scoop

#11

Re: Time for a little scoop

Mike Schwing from Md.

>No problem. I really like these kinds of bits on the interiors, especially where you can't really see the cutting surface. The reason they're so good is that they operate with no regard to grain direction. I also prefer these to the carbide burrs with a more random attack pattern as they seem to burn less, don't clog as much, and remove material more rapidly. Fluted carbide burrs with edged cutting surfaces leave a remarkably polished surface but you have to be really cognizant of grain direction otherwise they'll kickback and really dig into the wood as soon as you start an uphill cut - instant redesign opportunity.

Re: Time for a little scoop

#12

Barb Siddiqui

Re: Pic 2

Barb Siddiqui

>Thanks Mike. I'm famous for it. Over my workshop there should be a big sign:

What The Heck Do I Do Now? I've always managed so far!

Re: Time for a little scoop

#13

Barb Siddiqui

I just clicked the link

Barb Siddiqui

>to look at those, Mike, and was wondering about that comparison. Thanks for the input. I have some fifty-year old (my father's) carbide burrs and was wondering if they'd work as well. Your comment answers that question. I'll order something like that in two grits. Good idea.

Re: Time for a little scoop

#14

the finishing touch *LINK*

Mike Schwing from Md.

>I'm going to give away a very closely guarded secret - my sanding secret.

The "mini mops", made by Klingspor's (linked below) are the greatest thing ever invented for finishing difficult interiors like those of scoops and spoons. They're intended to be used in handheld rotary tool, however. Regardless, since discovering these gems I have been able to produce better results than I had ever hoped for on my concave surfaces off of the lathe. They're quite simply, wonderful, wonderful, wonderful. They come in 3 sizes and 3 grits. I use them on every single project. You will not find a better tool for sanding odd shaped things and such. Also, their big sanding mops that are held in a drill press are equally awesome for sanding exteriors surfaces of those that you can't do on the lathe.


img

Klingspor's Mini Mops

Re: Time for a little scoop

#15

Barb Siddiqui

Re: the finishing touch

Barb Siddiqui

>Oh boy. I just spent $90 at WoodCarvers Supply (coarse and fine grit 3/4" burrs, a coarse 1" burr, and a 1/4" rubber mandrel with three gits of sanding sleeves). I'll have to work up an order for Klingspor...need others items too. Thanks for the tips, Mike. Your work speaks for itself, I admire your pieces very much.

Re: Time for a little scoop

#16

Re: Time for a little scoop

pfduffy

>Hey, Mike, No fair! The scoop has to be chucked into a piece of scrap and turned to a fair thee well! The power of the scraper must be understood and applied. No cheating! ! Philip

Re: Time for a little scoop

#17

Re: Time for a little scoop

Lan Brady

>Good Idea

Re: Time for a little scoop

#18

Nice Scoop Barb

Barbara Gill, Remlik VA

>

Re: Time for a little scoop

#19

Thanks Mike!

Jennifer@Indy.USA

>

Re: Time for a little scoop

#20

Re: Time for a little scoop

Jennifer@Indy.USA

>Barb, this is cute as can be :)

I need to try one for my coffee.

Jen

Re: Time for a little scoop

#21

Use Cole Jaws

Dave Staeheli

>I've turned a few scoops and after trying a few jigs, gave them all up when I got my cole jaws. With an extra button set, you can hold a small scoop fairly well. With a little blocking and some zip ties, you can even tilt the opening toward or away from the handle. What I like is that there is usually space between the buttons to get my fingers in there to gage how thick the walls are. Which I had to guess at when using one of my jam chucks or jigs.

Re: Time for a little scoop

#22

Re: Time for a little scoop

JohnKJordan in East TN

>Nice and a great idea for a christmas present!

JKJ

Re: Time for a little scoop

#23

Re: Time for a little scoop

Carol Reed - in Nebraska

>Neat, Barb.

Makes me wish I drank coffee!

Re: Time for a little scoop

#24

tried one

JohnKJordan in East TN

>Thanks to the idea, I roughed out a coffee scoop this evening in cocobolo. To get the volume right, I used a silicone putty (kind of like silly putty) to fill the coffee scoop my wife uses. Then I hollowed until that putty just about filled the hole.

This one turns out to be just a prototype - I chose the wood poorly and ran into an internal void which I don't like. I also do not like the figure and color uncovered, so I'll probably start over. But this way I get feel the shape and balance. I like the way the hook feels in my hand and from the top, it looks sort of like a fish in motion (non-symmetrical).

The whole thing, BTW, is about 4" long, the length copied from the one that came with my sweetheart's coffee maker.

Thanks again for the idea.

JKJ


img

Re: Time for a little scoop

#25

Barb Siddiqui

Very clever...

Barb Siddiqui

>That's a sweet design John!