Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Using a machinist

Posts

Using a machinist

#1

Using a machinist

john lucas

>Frequently over the years I have needed the services of a machinist. The best way of course is to have the tools yourself which I now do (just have to learn to use them). The next best is to find a friend who is a machinist. However when I started needing work done I didn't have either.

Here's how I handled it. Most machine shops are expensive and it takes take down and set up time to do even the simplest job. Consequently it's really expensive to have a simple part made. What I did was go to several local shops and explain what I needed to get a quote. You need to leave the plans and be willing to wait some times a week or more to get the part. This lets them make the part in between other large customers so they don't have to charge the set up fee. The smaller shops will often do this for you. I took the guy a homemade ornament when I picked it up. The next time I went he turned the part around in 2 days. I've used the same guy multiple times and he will sit and discuss the options for making the parts and last time didn't charge me. I took him a small bowl as thanks.

So I guess what I'm saying is to make friends and use the same guy. Then when you need something simple done like pressing the bearings out of the headstock, they will gladly help you out.

Re: Using a machinist

#2

Re: Using a machinist

Jerry from Lapel In.

>You have a machinist friend in Indiana,is that to far to go?

Re: Using a machinist

#3

Re: Using a machinist

john lucas

>Jerry It was really a pleasure seeing your shop and learning from you. I have sooooo much to learn.

Re: Using a machinist

#4

Re: Using a machinist

Arch

>Hi John,

I do realize that your subject line is "machinist" and you refer to specific work, but in general, helpful friends have messed up about as many things as they have done right. It's a sad sight to see a beginner's expensive gouge being mutilated and gradually disappear by a 'friendly sharpening expert' or to watch a broken down car's expensive computer systems being fried by a kindly motorist with no expertise who stopped and 'took over to help out' without being asked. Especially when the owner had AAA. :)

In my area it's good to know a competent hobby machinist. or do as you and I did; use our own small mills/lathes. They've become affordable and in spite of today's planned obsolescense many households might do well to own and learn how to use a small lathe for various repairs down thru the years. After all my years, I can now work to a ten thousandth... of a yard, well ok at least a furlong! :)

Here, almost all of the few competent machinists (as opposed to machine operators) work for large companies and you can't get by the front office to talk directly with them.

Forget my negative musing, you posted some good advice for those of us who enjoy designing and/or making our own tools and gadgets.

Arch

Re: Using a machinist

#5

ebd

Re: Using a machinist

ebd

>I'm very lucky. My next door neighbor is a professional machinist with a lot of years experience at a local company. He has a pretty full shop of his own in his garage. He does small production runs for private customers when he's not at work. I've had him make a number of things for me that have been perfect. Often he will take care of me right away. Sometimes he has a run going and I have to wait a week or two.

In fact I plan to post some of his work as soon as I get all the pictures taken and annotated. It's something that he made for me a few years back that I designed. It saved me a boatload of money.

Re: Using a machinist

#6

Re: Using a machinist

Bill Crommett

>Another point: Even if your machinist friend is a competent expert, make sure he is sober when he starts your job. DAMHIK

Re: Using a machinist

#7

Re: Using a machinist

Mike Schwing from Md.

>Right on the money John. I recently bought the Shelix cutterhead for my new jointer and needed the bearings R&R'd. My Dad took them to the machinist that has been doing work for us on boats and such for many many years. He was happy to help.

Re: Using a machinist

#8

Alternative method

wilbur

>I've recently needed to fabricate some parts for some OWWM I have. The way I went about it was to enroll in a night time machining class at the local votech school. As it turns out, I'm the only one in the "class" that needs instruction. Every one else in the class already knows how to do machining. The reason they take the class is that the tuition cost works out to the equivalent of renting shop time at $3/hour.

Anyway, I figure I'm spending $190, I'm learning how to do machining, and I'll be able to make all the parts I need. Seems like a good deal.

Re: Using a machinist

#9

It depends on your inflection on the word "Using"

James McClure

>

Re: Using a machinist

#10

very funny, true but funny.

john lucas

>