Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

M. Hosaluc Ladle

Posts

M. Hosaluc Ladle

#1

M. Hosaluc Ladle

eliot d

>At the Yankee Symposium last Summer Michael demonstrated making a ladle. I remember most of the details. But I can't remember how he bent the handle. I seem to remember that he wrapped it in a wet cloth and heated it somehow. But I can't remember how he heated it. Does anyone remember how he did it? Any other links for making a ladle? Also, what are good wood for such a project?

Re: M. Hosaluc Ladle

#2

Re: M. Hosaluc Ladle

Stephen Mushinski

>Mike uses a microwave to steam bend the handle. You also need a form to put it in once it comes out of the oven. Put it in the form and let it dry. Best to use straight grained wood with moisture content of around 12 % if my memory is correct. Kiln dried wood will be much harder to bend without breaking. Hope this helps. - Steve

Re: M. Hosaluc Ladle

#3

Re: M. Hosaluc Ladle

Dennis Daudelin

>I think that I remember him doing it on high for 2 minutes in the Microwave.

Dennis

Re: M. Hosaluc Ladle

#4

Re: M. Hosaluc Ladle

eliot d

>It's funny, I woke up this morning and remembered that he used a microwave. So this was , not a senior moment, but a senior day! Anyway, I certainly would not have remembered that it was for two minutes on high.But now I have another question: what about the bowl-shaped part of the ladle that's not wrapped in a wet cloth? I'm worried about fire. His didn't burn or scorch; but ,then, that could depend on the type of wood and moisture content.