Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Turning 2007 pics *LINK*

Posts

Turning 2007 pics *LINK*

#1

Turning 2007 pics *LINK*

Andi Wolfe

>I posted pics of the Turning 2007 symposium on my weblog.

Cheers - Andi

http://andiwolfe.blogspot.com/#2440482092326553928


Turning 2007 blog post

Re: Turning 2007 pics *LINK*

#2

Re: Turning 2007 pics

Allen Neighbors

>Excellent work, Andi, thanks for doing all this. It was good to get to put some faces to names I've learned.

Where do you find the time...??...

Re: Turning 2007 pics *LINK*

#3

Turning 2007 pics/ Thanks, Andi, ...

Ed Moore

>I wish that I could have been there. I was at 2003 and 2005, but it wasn't in the cards this time. They do a super job at OVWG.

I appreciate your photos.

Ed

Re: Turning 2007 pics *LINK*

#4

Re: Turning 2007 pics

Bill Neddow

>Thanks, Andi. This certainly has brought back some very pleasant memories. I really enjoyed the symposium, made lots of new friends, and learned a lot. It was a very well organized affair. I'll be back in two years -- even though it is a two-day drive for me.

Re: Turning 2007 pics *LINK*

#5

Re: Turning 2007 pics

Andi Wolfe

>Well, time is a luxury that's hard to come by. For this post, I worked a couple of weeks, a few pics at a time, to process and post to the blog. I worked the text in during a long faculty meeting. Took 2+ weeks to finish. Sigh.

Re: Turning 2007 pics *LINK*

#6

Re: Turning 2007 pics/ Thanks, Andi, ...

Andi Wolfe

>Thanks, Ed.

Re: Turning 2007 pics *LINK*

#7

Re: Turning 2007 pics

Andi Wolfe

>It was great to see you there, Bill. I missed the 2005 one because of a woodturning trip to Australia (gloat!), but I do try to make them when I'm in the states.

Re: Turning 2007 pics *LINK*

#8

Re: Andi- I see you found my mushrooms ....

JamieD

>.. at the Folk School. They seem to follow me wherever I go?? It looks like you saw all the sights available in Brasstown, including Clay's Corner of Friday nights!

Re: Turning 2007 pics *LINK*

#9

Re: Andi- I see you found my mushrooms ....

Andi Wolfe

>I thought those might be your mushrooms! Yep, I did see all the sights and I tried to play tunes at Clay's corner - what an interesting experience that was.

Re: Turning 2007 pics *LINK*

#10

Re: Turning 2007 pics

Lan Brady

>Andi,

We are all so fortunate to have people like you willing to share. We would miss so much.

Thanks, Lan

Re: Turning 2007 pics *LINK*

#11

Re: Turning 2007 pics

Bill Neddow

>Andi, I am glad you mentioned Doug Thompson and his tools in your blog. I certainly loaded up on his turning tools -- and will be ordering more. I have been leery of new tools on the market and the claims made for them. I have been burned too many times by tool companies making claims that did not turn out to be true. But, if anything, Doug has understated the claims for his product. I finally bought one of his 5/8 inch vee shaped bowl gouges last spring. I put it in with my other tools. As I am a semi-production turner, I sharpen five of these tools at a time and turn until they are all dull.

Within days, i realized the Thompson tool was my favorite -- I was reaching for it first every time. It held its edge far, far, far longer than anything else I had including some really good M4 tools. The edge was easy to sharpen in a Wolverine jig, and a simple swipe or two with a diamond hone put a "scary-sharp" edge on it for final cuts. I picked up two more of these 5/8 inch gouges in Ohio, and will be ordering two more very soon. The other makes are going to be retired and maybe sold -- or used up trying new grinds.

Doug also had an 1 1/4 inch roughing gouge at the Ohio symposium. He only had two of the, and two of us Canadians cleaned him out. It is fantastic. Not only does it cut beautifully and stay sharp longer, it has a 3/4 inch tine on it, so there is no danger of the tool bending (as happens with the standard roughing gouge with its weak rat-tail tine). Other tool manufacturers should take note of this. Doug has been listening to us again and has produced at tool that solves the bending problems other manufacturers have not addressed. I know I am not the only one to have these rat tail tines bend. Other people in our club have had it happen. And when Mike Darlow was here last year giving a

seminar, he got on a "rant" about how he bent two new roughing gouges within minutes. He mailed them back to the manufacturer with a letter of complaint, hoping they would look at the problem. They mailed him two new gouges -- with the same tine -- and ignored the suggested improvements. He is, obviously, still fuming about that. I do not

believe Doug has these roughing gouges in production yet. He said they were rather expensive to produce. That is one big piece of expensive steel.

But, please, please, please, encourage him to produce them I would gladly pay double what I did to get such tools in future.

Re: Turning 2007 pics *LINK*

#12

Thank you Andi and Bill

Doug Thompson near Cleveland

>It's been busy around here and only now could I catch up on the posts.

Andi, it was very good to meet you at the symposium, I love your work.

Bill, it was good to meet you too and I'm glad you took the time to talk, I learned a lot. The idea to use a heavy duty spindle roughing gouge to rough out a bowl sparked my interest, I would like to see the grind. The news of the gouges that you and Don bought found Mark Sfirri so a search of another bag in the truck netted another (surprised me too) His first comment after using it in a demo was "it doesn't get dull" Cool!

Monday a large batch of 3/8 tools will be sent to be heat treated then I'll work on the larger tools including the 1-1/4 gouge and run as many as the tooling will allow.

Thanks again,

Doug

Re: Turning 2007 pics *LINK*

#13

Re: Thank you Andi and Bill

Andi Wolfe

>Hey, Doug - It was a pleasure to meet you. I can't wait to try the gouges you sent home with me. After the middle of November I will have plenty of time to be back in my shop to play with wood. I'm looking forward to it!