Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Cradle side dry fitted....

Posts

Cradle side dry fitted....

#1

JL

Cradle side dry fitted....

JL

>This is one of the cradle sides dry fitted. I reduced the diameter of the turnings by about 1/4". I plan on putting in a 1" piece between the "rails" at both ends. The rails are big leaf maple and the turnings are eastern hard maple. I'll be staining the piece to get a more uniform color.


img

Re: Cradle side dry fitted....

#2

Re: Cradle side dry fitted....

Carole Valentine

>Looks good, JL. The varied shapes look nice and should fascinate a little one. You did a much better job of duplicating than I ever could!

Re: Cradle side dry fitted....

#3

Steven Antonucci

Interesting

steve antonucci

>Did the mother ask for this design or was it from your own idea? I think that the spindles are supposed to be "negatives" of each other, right?

Am I close?

Steve

Re: Cradle side dry fitted....

#4

Looking good Jerome

Jorge Castaneda

>Please post the final product.

The baby is going to love it.

Thanks for sharing

Jorge

Re: Cradle side dry fitted....

#5

JL

Re: My idea...

JL

>the spindles are not quite negatives as the upper part of the bulbed spindles is somewhat different. The mother-to-be is not aware she is getting it (and the baby afghan that my wife has crocheted).

Re: Cradle side dry fitted....

#6

Re: My idea...

Carole Valentine

>Hmmm...you better give it to her quick before she goes out and buys one!

Re: Cradle side dry fitted....

#7

Re: Cradle side dry fitted....

Chuck Engstrom

>With a crib problem recently in the news from the Consumer Product Safety Commission, I'm wondering if there are any guidelines for spacing of the slats, etc. -- for instance, how close together should they be so hands, elbows, feet or such can't get caught between them?

It is certainly a nice-looking piece of work.

Best--

Chuck Engstrom

Re: Cradle side dry fitted....

#8

JL

Re: The rule that I've seen on the web.. *LINK*

JL

>is no more than 2 3/8" in space between any spindle for crib or cradle.

Troy posted this link.


Child Safety specs