Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

CA glue storage

Posts

CA glue storage

#1

CA glue storage

Pete in Holland, MI

>Did I read right someplace that opened bottles of CA glue are better stored in the fridge?

Bought a nice bottle and was using it off & on, and it thickened up & was unusable after 3-4 weeks.

thanx !

Re: CA glue storage

#2

Re: CA glue storage

Barbara Gill, Remlik VA

>I keep my unopened ones in the frig but the opened ones last months even in the heat of the summer. Maybe it is the quality of the glue?

Re: CA glue storage

#3

Re: CA glue storage

jared

>I have a pint bottle that is only about 1/4th full that is more than a year old, kept in a refridgerator all of the time and it is in real good shape and works well. I transfer some to a small applicator bottle, about an ounce, when I need some. The cool temps are the key. Jared

Re: CA glue storage

#4

Peter Charles Fagg (UK)

Re: CA glue storage

Peter Charles Fagg (UK)

>I have always stored my CA glue in the fridge, both the new and opened, it usually increases the life span!

Regards, Peter

Re: CA glue storage

#5

Re: CA glue storage

Brian Hahn in SW Wisconsin

>I store unopened bottles in the freezer. Opened bottles (2 oz size) sit in the shop with the cap on. I keep them very, very far away from the accelerator. I also keep them out of the sunlight.

Re: CA glue storage

#6

Re: CA glue storage

adrien

>I'm with Brian. Putting opened bottles in the fridge makes for condensation of moiture inside every time they are taken out resulting in premature polymerization.

Re: CA glue storage

#7

Dick Hines

Re: CA glue storage

Dick Hines

>I only buy CA as I need it. That way, I hope, I am getting fresh glue. I take the top off toss it in the trash, cut the tip and store it on a shelf on the top of the lathe headstock. The only trouble I have is in damp weather. Just use a small piece of stainless wire the same size as the tip to keep it clean.

The only CA I have dry up before I use it was some black. I use the Hot Shot brand.

Re: CA glue storage

#8

Re: CA glue storage

JohnKJordan in East TN

>Every time this subject comes up there is a big difference in experiences. (what a surprise!) Some keep it cool, some leave the caps off, some put the caps on, etc.

I personally have had success refrigerating the bottles with the caps on. I put them in a door shelf on my garage fridge. I have not had one go bad since I started this and some bottles are about 4 years old. Sometimes the tip clogs but I clean it with a piece of wire.

JKJ

Re: CA glue storage

#9

Re: CA glue storage

Bill Hale / The Wood Spinner

>Quality makes a major difference in shelf life. The more distillation the better the quality. I only buy from Paul at Starbond. I store my 16 oz with lid on and my applicator bottles with open tip. I do store with no refrigeration and some is as old as two years and uable. Casa Grande, AZ is hot and dry in the Summer and warm and dry in the winter.

Ca cures with lack of oxygen and with moisture so this may not work in your area.

Good turning and be safe

Bill in CG, AZ