Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Photographing Works

Posts

Photographing Works

#1

Photographing Works

Rick Urban

>The recent digital camera thread reminded me I need some advise on photographing works. I know there is at least one professional photographer out there, so...

My question deals specifically with focus and depth of field. I thought I understood about focusing on the closest point (e.g. front bowl rim) stopped down as much as possible with a longer lens to be able to include the farther point (back rim) in suitable focus. I'm using a couple of 75W daylight floods with fill in flash on the camera, and still have less than desirable results.

All suggestions welcome.

Re: Photographing Works

#2

Re: Photographing Works

Gary in Zirconia,NC

>It is best to focus 1/3 of the way back on a piece. Also, the length of the lens does not determine the depth of focus. The size of the image determines the depth of focus. The larger the image the shorter the depth of focus. Most point and shoot cameras do not have a very small aperture so therefore they can not get a lot of depth of field.

Re: Photographing Works

#3

Re: Photographing Works

john lucas

>Gary is partly right. Focus 1/3 of the way into the piece but this is only true if you have enough depth of field to get the entire piece in focus. If you don't then it's more important to focus on the most important area, although it generally looks better to have the front in focus.

Size of the piece doesn't determine depth of field, it's the magnification. For example if I shoot a 4" bowl and it fills the frame I will have the same depth of field as a 19" bowl that fills the frame. It doesn't matter whether I use a telephoto of wide angle to do this.

3 things can change the depth of field. Use a smaller f stop (bigger number) f11 has more area in focus than f 4. Make the object smaller in the frame. To do this back off or zoom back. Then you can crop later to fill the frame. You will need to shoot at high resolution to do this without having a nasty looking image. And last, make the 2 planes (camera and subject plane) more parallel to each other. In other words if I shoot a bowl from higher up my camera back is more parallel to the rim so I am more likely to get this in focus. I might lose the focus of the bottom and you can't see the form of the bowl. If this is important then you have to sacrifice the depth of field and try one of the above.

Using the 75 watt lights and flash is mixing 2 different colors of light so your pictures will be impossible to color correct. Use one or the other. Quartz and Halogen lights put out red color and flash puts out a blue color. People often do this because they have the quartz or halogen lights on the left and right and the front of the piece is dark so they add flash. Either that they can't turn the flash off on the camera. Look in the manual, most cameras have a way to turn the flash off. The use the 75 watt lights and set the camera's white balance to the tungsten setting which is the little light bulb with lines around it.

Re: Photographing Works

#4

Re: The correct term is depth of field.....

Jamie Donaldson

>...not depth of focus, which is a specific technical term relating to distance from lens node to film plane. John has covered the methods to achieve max. depth of field well for you, and it's difficult to see when viewing on a tiny camera screen. For my critical work I plug the camera "video out" into a 13" monitor, which allows for much better viewing.

Re: Photographing Works

#5

WoWow! A lot to absorb

Rick Urban

>Thanks a million for all the great stuff I hadn't considered. It will take me some time to digest and work with it.

FWIW I'm working with an 8MP Digital Rebel because my other Canon lenses (35-80mm and 75-300mm) would complement the low end 18-55mm I got with the camera. I've been taking the easy way out and saving them as jpg files, so it looks like I should return to raw and stop mixing light sources.

The floods I found were Sylvania daylight plus, and I was thinking I determined they were 6500K, but I've slept since then and can't be certain.

I'll see about capturing directly to the computer to better see what's happening.

Thanks again for the great assist!

Re: Photographing Works

#6

Re: Rick- either of the shorter focal ....

Jamie Donaldson

>...length lenses you mentioned should do the job if they focus close enough for your needs. I seldom capture in RAW- FINE or HIGH quality jpg should do just fine.

Re: Photographing Works

#7

Re: Rick- either of the shorter focal ....

john lucas

>Like Jamie I usually use JPG high. If I plan to do much manipulation in photo shop I change them to a TIFF before I start but I rarely do that much work on an image.

I haven't tried the lights you say but it's rare to find a tungsten light that is very much above 3200 K even if they say daylight. I've played with several including the Reveal lights that look really blue. The safest thing is to simply try several different white balance settings and see. I believe your Canon has a custom white balance setting where you shoot a white card in the set then push a button and it saves the correct color.

Re: Photographing Works

#8

Re: Rick- either of the shorter focal ....

DickL

>John -

Where is that button on my Nikon F? (Showing my age and the age of my equipment.)

Regards,

Dick

Re: Photographing Works

#9

White balance is a problem for my software

Rick Urban

>I haven't found a way to fool with the white balance with my software except with an original raw format, and I think I'll postpone becoming that level of a pro photographer until I think I'm ready to launch an assault on the Del Mano or similar gallery (which is gonna take some time yet).

Re: Photographing Works

#10

I just parted w/ my '79 Canon A-1 last month

Rick Urban

>

Re: Photographing Works

#11

Now the homework and practice is up to me

Rick Urban

>

Re: Photographing Works

#12

I neglected to mention they were halogen

Rick Urban

>

Re: Photographing Works

#13

Re: Rick- either of the shorter focal ....

john lucas

>I miss my F and my F2. I just sold my last FE2. I no longer have any film cameras. Sad day.

Re: Photographing Works

#14

Steven Antonucci

Anyone want to buy a Hasselblad 500CM?

steve antonucci

>Or a Rolleiflex TLR?

Oh, the money I have tied up in film cameras and darkroom equipment...

Steve

Re: Photographing Works

#15

... which reminds me. I have a...

Rick Urban

>Canon Rebel (film) body that is the next thing to new if anyone is interested, email me off thread.

Re: Photographing Works

#16

Re: Hey Steve- I'm down to only.....

Jamie Donaldson

>...5 Rollei TLR's after having 16 when I retired. I had converted them to a 645 format and will make someone a deal!

Re: Photographing Works

#17

Steven Antonucci

My Rollei hasn't seen film in 8 years

steve antonucci

>My Hassy is probably at least 3 years. I did bring it to Zion and Bryce, since I wasn't going "out there" with my wife and daughter...

I also have an old medium format projector (Lindeman?) that I bought on Ebay back when you could still find bargains. From time to time, I have put it on a ladder at the back of the living room and projected slides at 10' x 10' on the back wall with almost no visible grain (unless you put your face on the wall).

Changed my mind- I'll hold on to them, just in case...

Steve

Re: Photographing Works

#18

Re: Anyone want to buy a Hasselblad 500CM?

JohnKJordan in East TN

>>Oh, the money I have tied up in film

>cameras and darkroom equipment...

I've still got three Nikons and a 4x5 camera, but sold my entire darkroom for $100.

Anyone interested in a nice Nikonos IV-A or a Nikkormat? (I'm keeping the F as it goes nicely with the telescope.)

JKJ