Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

outboard banjo

Posts

outboard banjo

#1

outboard banjo

ryker acuna

>I have the Jet 1642 and I need to make an outboard attachment. I have a 19" bowl I turned on my friends lathe now I want to finish the bottom on mine. Does anyone have pics of a home made attachment to the end of the lathe. I welded a floor stand but my lathe is on carpet and the stand is to light and it wobbles alot. Im a pretty good welder and wanted to get some ideas about welded and bolt on attatchments. Thanks for all your help. Also would it be cheaper to buy and adapt something? Let me know. R

Re: outboard banjo

#2

Re: outboard banjo

Gary in Zirconia,NC

>I'd look at the Vicmark for $300. Craft Supplies handles it.

Re: outboard banjo

#3

Re: outboard banjo

Larry Bisbee

>Craft Supplies USA has Vicmarc Outboard Bracket in the 2007 catalog on page 34 (Item Number 191-8008 ) for $299.99 plus $35 shipping charge.


img

Re: outboard banjo

#4

Re: outboard banjo

adrien

>Some years back I stuck a 3" steel pipe in a 5 Gallon bucket filled with cement. The upper end was threaded to take a reducing section into which the tool rest fitted. 'Twas a bit hairy, but I was able to turn a large piece outboard on a Myford lathe. Fortunately I no longer have the Myford 'cause I don't think I'd try it a second time.

At any rate a cement=filled base might help and not cost too much.