Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

some help needed - Wally?? my mentor?

Posts

some help needed - Wally?? my mentor?

#1

some help needed - Wally?? my mentor?

Carol Reed - in Nebraska

>Well, gang, I finally have one on the lathe I haven't blown up yet. And I really don't want to, either. :) This piece has lovely grain and a little chatoyance. (sp?)

Terry Q at Indy Fest gave me a couple of bowl blanks turned when wet - elm, I think? Now they are drier than a box of Kleenix in the Sahara!

I have one in a pleasing shape to me, but I have tear out problems. I have discovered that I can get a catch with every tool I have. LOL.

So how do I get those little tear outs gone? The ol' 80 grit gouge would take forever.

Also the grain gets pretty tight and the wood is so dry, that now cracking is a problem. Discovered that while trying to sand. Learned to crank the speed all the way down on my mini lathe! I used CA to stop the one crack I discovered. Then I dusted myself off and came in to get some advise.

I remember Wally teaching me something about applying oil or wax and then turning a little more. But my memory has been poluted with learning Greek and Hebrew the last couple of years, so I don't remember clearly what he taught me.

Re: some help needed - Wally?? my mentor?

#2

Re: some help needed - Wally?? my mentor?

Brian Hahn in SW Wisconsin

>A couple of suggestions:

First, a scary sharp tool. I hone my tools with a diamond hone after grinding. Sharp tools cut cleaner.

Second, some type of lubricant often helps. A lot of people use paste wax or mineral oil. I usually dampen the wood with water, then take another light cut.

Third, lubrication also helps during sanding. Again paste wax and mineral oil are popular. If you are going to use an oil finish, then something like Danish Oil would also be appropriate.

Another approach for sanding is to stiffen the wood with a thin coat of shellac (1# cut) or lacquer (diluted 50%). Wipe the excess finish off immediately, wait a few minutes, then sand again.

Re: some help needed - Wally?? my mentor?

#3

Re: Something else...

Allen Neighbors

>that might help on the tear-out, in addition to scary sharp: Speed is our friend, when he's in company with very light cuts.

Sometimes when I get tearout, I resharpen, crank up the speed, and take very light cuts - I try to make angel hair - most of the time it works, but sometimes it doesn't.

Re: some help needed - Wally?? my mentor?

#4

Re: Need more info- what tool .....

Jamie Donaldson

>.... are you using? On the outside, a sharp Ellsworth style grind allows a shear/scraping cut by dropping the handle and lightly drawing the long cutting edge on a diagonal along the shape, flute toward and almost touching the surface. A John Jordan tape would be a big help with this very useful method that can also be accomplished with a scraper or skew used in the same way to make a diagonal shear/scrape.

Re: some help needed - Wally?? my mentor?

#5

Re: some help needed - Wally?? my mentor?

Terry Quiram, Roanoke Illinois

>Carol

I don't know what you are turning but it isn't Elm. You will have to post a pic.

Terry

Re: some help needed - Wally?? my mentor?

#6

Re: some help needed - Wally?? my mentor?

Bill Stehman

>Wally said he was out of here but I hope not. He used to use thinned white glue with great success.

Most anything will help, many coat of thinned lacquer also work for me.

Re: some help needed - Wally?? my mentor?

#7

Re: Need more info- what tool .....

Carol Reed - in Nebraska

>Its on the inside just under the rim. Only tool I could manage in the end was my big honkin' round nose scraper, freshly sharpened. Everything else I simply could not control. I need lessons in technique!!!

Re: some help needed - Wally?? my mentor?

#8

Re: some help needed - Wally?? my mentor?

Carol Reed - in Nebraska

>You put two partially turned bowls in my car. If they are not elm, I don't have a clue. I'll take a picture tomorrow. Whatever it is, it is sure pretty!

Re: some help needed - Wally?? my mentor?

#9

Re: some help needed - Wally?? my mentor?

Carol Reed - in Nebraska

>I sincerely hope Wally only meant that particular thread. I will privately email him.

When I was in his shop an eon ago, he used oil and wax on two different occasions. The cob webs are falling from the brain cells, thank goodness. Tomorrow I will have another go at it. I have some antique oil, some shellac, some wax, some poly gel, some spray lacquer, and even some glue. Something ought to help.

Thanks for the tip to crank up the speed. I'll try that, too. Now for some tips on using the small bowl gouge. Handle down, ride the bevel, what else???