Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Received My Replacement Hunter Tool

Posts

Received My Replacement Hunter Tool

#1

Received My Replacement Hunter Tool

Ron in Drums PA

>You have to love CSUSA. They let me return my Hunter#3.

After talking to them I decided to try out an unhandled Hunter #4 and use it with a Kelton handle.

Maybe its the way I turn. But with the extra mass from the handle and the thicker bar, this tool worked like I heard it should.

No more chattering, skipping or white knuckles. And no learning curve. Success with the very first cut

The #4 bar is around 8-1/2" long, inserted into the handle gave me a little more than 6" to work with. I was able to work with the bar hanging over the tool rest an easy 5-1/4". and it worked wonderfully. The transition from the bottom to the side was flawless.

I'm sold! When is the curved model coming out?

Re: Received My Replacement Hunter Tool

#2

Re: Received My Replacement Hunter Tool

john lucas

>If you were hanging the #3 out 5" you probably would get chatter. It kind of depends on the angle you were cutting, and the wood, lathe speed etc. Mine is in a 3/4" steel bar and will go a little further but the #4 is much better at that depth.

Re: Received My Replacement Hunter Tool

#3

Re: Received My Replacement Hunter Tool

georgetroy

>I use outriggers where ever possible, just like I do on my BCT tools from Packard. Sometimes I will even use Vise grips to keep the straight bars from torquing. If that doesn't work then it's my captive system. I have not invested in the Hunter type systems yet, maybe later. GT

Re: Received My Replacement Hunter Tool

#4

Re: Received My Replacement Hunter Tool

Ron in Drums PA

>Ok, there the difference. Your bar is 3/4" thick, the #3 is 3/8" thick (BTW the shaft is only 4" long)

I'm guessing you taper the 3/4" bar to fit the #3 bit.

Re: Received My Replacement Hunter Tool

#5

Re: Received My Replacement Hunter Tool

john lucas

>I just barely tapered the tip so it won't catch in a small hole. Mostly I just inserted the 3/8" bar in the 3/4 bar. What I am going to do is shorten the 3/8" bar. The smaller tools chatter less than the bigger hunter tools, when extended really far. Therefore I think the 3/8" hunter tool will be better for my purposes if the 3/8" bar is shorter and you have the support of the 3/4" bar.

The Hunter tools are new and we are all experimenting with what works the best of our personal style of turning. There will probably be a lot really cool techniques once we all start to understand what works.

Re: Received My Replacement Hunter Tool

#6

Re: Received My Replacement Hunter Tool

Ron in Drums PA

>Interesting, I found the larger Hunter having less chatter.

I like the idea of inserting the 3/8" bar into a 3/4" bar. This would make a box rest usable with this tool.

Thanks John