Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Cremation Urns

Posts

Cremation Urns

#1

Cremation Urns

Bill Hale / The Wood Spinner

>I just looked at Bill G's site on urns. Seems simple enough but what about the top? I was wondering what you folks do. With his bottom entry it appeared that his had just a flat top.

What do you think about a lidded recess in the top for any special thing the recepient may want to keep with the ashes?

Good turning and be safe

Bill in Casa Grande, AZ.

Re: Cremation Urns

#2

Re:A timely question Bill, because.....

Jamie Donaldson

>... I'm going to make a small urn for some of my wife's ashes to go on my mantle, and want to include a way to include her rings on or in the top. I haven't yet had time to start with design options, and maybe the WC gang will have some inspiration for us.

Re: Cremation Urns

#3

Re: Cremation Urns

Arch

>Hi Bill, Sounds like a good idea to me. Some possible contents might be a cross or other religious object, a beloved pet's ashes, a wedding ring, meaningful jewelry, the possibilities are unlimited and personal.

Hollowed from the bottom with a flat top, I inserted a polished stainless steel disc engraved with name & dates for the one urn I have turned. The timber was NIP. Bronze, Corion, etc. might be nicer than S.S. according to the timber. Thanks for the idea. Arch

Re: Cremation Urns

#4

Re: Cremation Urns

Robert D. Macgregor

>Would it work to make the lid of the urn into a shallow, lidded box? That seems like a logical approach, as long as you had some idea in advance how much volume you needed for the special items.

Re: Cremation Urns

#5

Re: Cremation Urns

Bill Grumbine (Kutztown PA)

>Hi Bill

The top of the urn on my site was dished just a little bit to give the illusion of a vase, but the stem is solid for the most part. If you have any questions you would like to discuss, feel free to email me. If you do and you don't hear back for a few days, I am on the road starting tomorrow morning. SWMBO checks my email while I am gone, but does not dispense turning advice! ;-)

Bill

Re: Cremation Urns

#6

Re: Cremation Urns

The MountainMan

>My urn will have to be really big!! Not just for me, but for my favorite fly rod and reel!! Ha! When the time gets closer, we start thinking about these kinds of things!! Yep, the time is getting close for me!!! No more cancer treatments out there - that would not make a vegie out of me!!!

Regards

The MountainMan

Re: Cremation Urns

#7

Let your heart be your guide, Jamie..

Eddie Pacheco, San Jose, Ca.

>You'll end up with the best piece of turning work you've ever done.

Re: Cremation Urns

#8

Re:A timely question Bill, because.....

Carole Valentine

>Jamie, I am trying to think how to do the same thing with my Mom's ashes and the cross given to her by the church, which she never took off. I am not experienced in threading but I think I am going to have to learn in order to accomplish this.

Re: Cremation Urns

#9

Re: Cremation Urns

Ralph Watts

>Bill,

One solution for rings would be to turn a finial on your lid with disks or coves but split them then turn a tenon on one and drill the other. This allows you to trap the rings by gluing the top back on.

regards,

Ralph

Re: Cremation Urns

#10

Re: Ralph- I believe you are suggesting..

Jamie Donaldson

>... what had been my first idea- a finial with a knob of some design to trap the rings. I'm not sure what you meant about a split in your post- can you explain further for me?

Re: Cremation Urns

#11

Re: Cremation Urns

Ron McKinley

>There is a good article by Brad Adams on using ABS plumbing fittings for screw threads on urns in the File Cabinet, page 10 on WOWS. That may give you some ideas........Ron