Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Anybody got a tall box design?

Posts

Anybody got a tall box design?

#1

Anybody got a tall box design?

Barry Irby

>I want to make a tall slender box. Over ten inches tall internal and about 2" in diameter. Want something nice looking, but its a gift to sit on the counter in the kitchen and hold pasta.

Any body got Ideas I can beg, borrow or steal?

Re: Anybody got a tall box design?

#2

Re: Anybody got a tall box design? *LINK*

Jennifer@Indy.USA

>Barry, Alan Lacer makes some really lovely spaghetti boxes. You can see them here in his gallery.

Jen


Alan's Web Page

Re: Anybody got a tall box design?

#3

Steven Antonucci

I don't think 2" internal diameter is big enough

steve antonucci

>I think that's probably about 1 package of Ronzoni? In my house, that's a serving and a half...

Steve

Re: Anybody got a tall box design?

#4

e

Jorge Castaneda

>a while back e posted some very nice tall boxes right on this forum, check the archives.

Talking abouy e, has anybody heard from her?

Thanks

Jorge

Re: Anybody got a tall box design?

#5

Re: Anybody got a tall box design?

bernie feinerman

>The latest British Woodturning magazine has an article on turning a "box" that could hold pasta

Re: Anybody got a tall box design?

#6

Re: Anybody got a tall box design?

John Veerkamp

>Barry this is a walnut box 17" tall by 4" dia. It is custom made for knitting needles.


img

Re: Anybody got a tall box design?

#7

Re: Anybody got a tall box design?

John Veerkamp

>view open


img

Re: Anybody got a tall box design?

#8

Mike Stafford

Re: Anybody got a tall box design?

Mike Stafford

>John, that is really nice. I like the design very much. I have no idea how you hollowed something that tall/deep. I tried deep hollowing a couple of boxes with a heavy straight scraper much like Richard Raffan showed in his book. I managed to complete those boxes but the experience was so nervewracking I gave the heavy scraper to a friend so I wouldn't be tempted to try it again. My boxes were only 6-7 inches deep; no where deep as yours.

Re: Anybody got a tall box design?

#9

Re: Anybody got a tall box design?

John Veerkamp

>Mike, Thanks,

I used a John Jordan hollowing tool. I used the straight one for most of the hollowing from top towards the bottom and across the bottom. I used the swans neck one for the lower side and bottom near the corner.

This old air dried walut was a real challange on the end grain. I"m not sure I want to ever do another quite this narros and deep.

John

Re: Anybody got a tall box design?

#10

Mike Stafford

Thank you, John.

Mike Stafford

>I do not have any of the tools you describe and making such an item would have been impossible for me but your solution and description were very valuable.

There is always more than one way to skin a cat!