Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Cocobolo box....

Posts

Cocobolo box....

#1

Mike Stafford

Cocobolo box....

Mike Stafford

>Here is a little cocobolo box I hollowed with Hunter Tools not so much because I needed a swan neck for the shape but just for the experience of using them on a dense wood like cocobolo. The Hunter Tools seem to really like chewing through dense exotics. The finish coming off the tool just glistens and has a lovely sheen to it. Someone, not me, with really excellent tool control could probably hollow a box and not need to sand it. I am still learning how to use this tool and I was able to get such a smooth finish off the tool that I started sanding at 220. The shavings coming off the end grain were like angel hair and completely translucent.

This box was sanded until it was really smooth and finished with wax. Finished size is 2 1/4" tall and 2 3/4" in diameter. Comments appreciated...


img

Re: Cocobolo box....

#2

Re: Cocobolo box....

Mac

>Excellent design and workmanship............

Re: Cocobolo box....

#3

Re: Cocobolo box....

Cyril Griesbach

>Another beauty, Mike!!

Re: Cocobolo box....

#4

Re: Cocobolo box....

Dale Bright

>A beautiful box, Mike. You boxes are all exceptionally well done. Every time you post a pic of one of your boxes I am inspired to turn boxes.

Re: Cocobolo box....

#5

Mike Stafford

Thank you gentlemen.

Mike Stafford

>I hope you will turn some boxes. I enjoy turning boxes so much and I hope to infect others with my love of box turning. Thanks for the comments.

Re: Cocobolo box....

#6

Re: Thank you gentlemen.

Gary in Zirconia,NC

>Yep Mike, it's working. I turned my first box today! I wish it looked half as good as yours.

Gary

Re: Cocobolo box....

#7

Re: Cocobolo box....

Allen Neighbors

>Mike, I just love all your little boxes! You have a way with form and design that I could only hope for someday. I have your tutorial printed so I can keep referring to it, until I get proficient enough to not need it. Thanks for taking the time to do such a magnificent job on the End-grain box tutorial.

I also love turning Cocobolo. (I do take the necessary precautions)

I bought my fourth piece of wood the other day, at Woodcraft in FTW, a 2" square x 12" piece of Cocobolo. I intended to make threaded finials with it, but after seeing this little box, I might try a making an even smaller one from this stick. :)

Thanks for posting.

Re: Cocobolo box....

#8

Re: Cocobolo box....

Jim Shaver - Oakville, Ontario

>Hey Mike,

Clean and classic, and amazing grain match...pure beauty!

Take care,

Jim

Re: Cocobolo box....

#9

Both Are Beautiful Mike.

Barbara Gill, Remlik VA

>

Re: Cocobolo box....

#10

Mike Stafford

Re: Cocobolo box....

Mike Stafford

>Allen you are too kind. A few suggestions for turning cocobolo or any of the dense exotics. It goes without saying that tools should be sharp. I always sharpen my tools one more time before I make that last pass and make that pass as slowly as I can.

When sanding be careful about getting the exotics too hot. They will heat check in a New York minute. Frequently I sand with wax as a lubricant. Some others have suggested sanding with oil as a lubricant. I also like to use a worn out piece of 3M non-abrasive pad behind the sandpaper to eliminate pressure points. Slow down your lathe when sanding and keep the paper fresh. Use sand paper like someone else was paying for it. If you are using oil or wax as a lubricant clean the surface between grits with mineral spirits. And also clean the surface after the last sanding before you finish with wax or buff up the finish you have. I like to buff up the finish with shoe shine felt. The felt generates a little heat and really polishes up the wax.

My last piece of advice is to enjoy yourself. Ultimately that is why we have wood turning as a hobby isn't it?

Thanks again for your nice comments.

Re: Cocobolo box....

#11

Dick Hines

Re: Cocobolo box....

Dick Hines

>One of these days---One of these days!!!

Re: Cocobolo box....

#12

Ouch! That is smoking hot!

Stephen Mushinski

>

Re: Cocobolo box....

#13

Re: Cocobolo box....

Robert D. Macgregor

>Nice symmetry. Are you sure you didn't get the top picture upside down?

Re: Cocobolo box....

#14

Mike Stafford

I don't think so, Robert

Mike Stafford

>No, I don't think it is upside down since there is a little foot on the bottom. The bottom has the same shape as the top except for a little foot. If it wasn't for the foot I wouldn't know which end is up until I opened the box....8)

Re: Cocobolo box....

#15

Allergy?

JohnKJordan in East TN

>Very Nice Box. I love working with cocobolo for boxes and things. (Being completely daughterless, I've made several for baby girls of friends, the idea being they might grow up with the box on the dresser, the content changing from diaper pins to little treasures.)

Do you get an allergic reaction from cocobolo? I have to keep my skin covered when sanding or I break out into a rash. If it gets any worse, I'll have to use my stock for something else. (I found out that cocobolo is great for starting fires in the woodburning stove - the resins catch quickly, burn hot, and don't easily go out.)

JKJ

Re: Cocobolo box....

#16

Mike Stafford

John, knock on wood...

Mike Stafford

>So far I have not encountered any woods that I am allergic to although there are some that make my throat tickle a little. They seem to be "red and pink" woods such as peroba rosa, padauk, and bloodwood. But I have that same tickle when I work with walnut and wenge sometimes. I hope I don't ever develop an allergy because I dearly love turning these woods. I use a dust mask when sanding, sand with wax most of the time and do all I can to evacuate the dust out of the shop.