Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Turnings for a cradle?

Posts

Turnings for a cradle?

#1

JL

Turnings for a cradle?

JL

>I'm making a cradle for some friends who are expecting their first.

I've started on these turnings (see pic below). The upper rail and lower "rails" will be about 3" x 36" x 7/8" thick. The approximate spacing of the spindles is about 3".

Are these spindles too "fat"? The overall size of the cradle portion is going to be 38" long by about 22" high by about 18" at the bottom. The stand for the cradle is going to be about 39" high.


img

Re: Turnings for a cradle?

#2

Re: Turnings for a cradle?

Cyril Griesbach

>When I think of a cradle I think of something delicate. These don't look delicate to me. Advise worth the price paid.

Re: Turnings for a cradle?

#3

Martin Harris

Re: Turnings for a cradle?

Martin Harris

>The "fatness" is in the eye of the beholder. Go with what pleases you. But check the widest space between them when assembled. I'm not sure what it is, but I believe there is a national safety standard to prevent a baby slipping its head thru. And it's smaller than you would think.

Re: Turnings for a cradle?

#4

Re: Turnings for a cradle?

Mac

>I like them JL,they have a nice comfortable look about them....do be careful with the spacing tho....good work...

Re: Turnings for a cradle?

#5

Re: Turnings for a cradle?

Jason Clark

>I believe the current rule of thumb is that a regular 12 oz soda can shouldn't be able to fit between the spindles.

Jason

Re: Turnings for a cradle?

#6

JL

Re: No more than 2 1/2" between is the standard...

JL

>although smaller is okay.

Re: Turnings for a cradle?

#7

Re: Turnings for a cradle?

JohnKJordan in East TN

>To me they look big and round and playful like they belong in a baby's room while other slim, elegant spindles might better adorn cherry furniture in the foyer.

JKJ

Re: Turnings for a cradle?

#8

Re: Turnings for a cradle? *LINK*

Troy German

>I think they look very good. I like the reverse image design in alterneting spindles.

I can't vouch for this sight at all, but they reference a code # that might help or lead you in the right direction.

Troy


Crib specs

Re: Turnings for a cradle?

#9

Re: Turnings for a cradle?

Cyril Griesbach

>A regular soda can? Does that mean one can't use a 12 oz diet soda can?

Re: Turnings for a cradle?

#10

JL

Re: Thanks for the link.

JL

>