Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Update on big lathe purchase...

Posts

Update on big lathe purchase...

#1

Update on big lathe purchase...

GolfSteve in Calgary

>So you all talked me into it (http://www.woodcentral.com/cgi-bin/turning.pl?read=162891) - I decided to go ahead and buy the big lathe. There were some ups and downs with the seller not being sure he really wanted to sell, but eventually he decided to downsize and sold me his old lathe for about half of what a new one would cost. I think this lathe will add a lot of capability to what I can do in the shop.


It came with a bunch of accessories, that when added up probably are worth $1000 on their own, including a 24" tool rest, a oneway stronghold chuck with four sets of jaws, a bunch of bowl rests, and a bunch of faceplates.


He also got rid of some of his turning stock, but I noted he didn't let any of his "good stuff" go even though it will be too large for his new lathe. The box on the lower right of the following picture is a disc sander stand/base for the lathe.


I know nothing about turning except for making a mallet five years ago on a buddy's lathe and a bit of reading, so I laminated up some 2x4's and tried my hand at a bowl today:




Nothing too flash, and I wasn't trying to achieve perfection on my first try, but it was fun and I managed to not kill myself. I will be taking a turning course next month and look forward to doing more spinny stuff.

I was also lucky and had to travel to Colorado for work last week and picked up some curly maple turning blanks really cheap at Rockler (they cost $10 at Rockler, and locally those blanks would have run $40-$60).

Re: Update on big lathe purchase...

#2

Wow, it looks like you scored!

Eddie Pacheco: San Jose, Ca.

>The lathe looks in very good to pristine condition. The accessories that it came with are a good start too. Usually, for first timers, the lathe is the least expensive part with the needed tools, chucks, gizmos, etc. costing more than the lathe. Right off the bat you have enough stuff to be productive. Welcome to the turning side.

Re: Update on big lathe purchase...

#3

Re: Update on big lathe purchase...

Cyril Griesbach

>Welcome to the vortex. You'll soon be hooked completely. It certainly looks like you made a good deal on the lathe and accessories and if you can get 2x4s to look that good you're well on your way. Now work on your forms and for that you'll get a lot of examples of good form right here.

Re: Update on big lathe purchase...

#4

Re: Update on big lathe purchase...

Robert D. Macgregor

>Congrats!

I think its funny that you said in your earlier post that you weren't particularly interested in bowls, but the first thing you mention turning is...a bowl!

I think because of the fixed headstock the General is probably a bit less versatile, in terms of bowl turning, than many competitors, but it is a bit of a challenge to get the right price on a good lathe in Canada. Even Canadian-made lathes seem to cost less in the US! You scored a real bargain, especially with all the tools and wood, too.

Re: Update on big lathe purchase...

#5

Steve Kubien

Sweet!

Steve Kubien

>Soon that nice looking bench in the first pic will be covered in blanks, roughed out bowls, sanding gear, chucks, tooling etc. Have you got a tablesaw? It makes great for storage.

Have fun and welcome to the vortex.

Steve Kubien

Ajax, Ontario