Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

I finally did it...

Posts

I finally did it...

#1

Steven Antonucci

I finally did it...

steve antonucci

>I have all of my tools on wheels with the intent being to roll thing "out of the way" when they aren't being used. Today, after 10 years of being front and center in my shop, I finally rolled my tablesaw to the back of the garage.

The turning point was that I had been roughing out a large ambrosia maple hollowform and the shavings were 4" thick on top, and 2' behind the saw. I moved it to sweep out 4 bins worth of curlies, and looked at the space once it was out of the way. Man, those things take up a ton of space!

So, now if I want to use the saw, I need to roll it forward 15' versus rolling it 3' away from it's old spot. Funny thing is, it's been that way for so long, but I've already gotten used to it being "gone."

I feel better having gotten that off my chest.

Steve

Re: I finally did it...

#2

Re: I finally did it...

Mike Schwing from Maryland

>Let me know how you like it. Necessity had me put my tablesaw on wheels, too. I have never liked it, as it simply isn't rock solid. Cuts just the same, but I can feel it move under me and it just unnerves me.

Re: I finally did it...

#3

Steven Antonucci

Tablesaw has been on wheels for 7 years

steve antonucci

>And I don't notice it any more. I know what you mean, but it isn't bad at all. If you were so concerned about it moving during a cut, you could put it on locking casters.

If you get one of those professional mobile bases, I think they have a mini-jack to set them on the floor.

Steve

Re: I finally did it...

#4

Re: I finally did it...

john lucas

>My shop is so crowded i had to put almost everything on wheels so that I could move it if necessary. All of the wheeled items have wheels that flip up so they sit flat on the floor when I need to use them. Unfortunately I have figured out a way to put the big lathe on wheels conveniently. It take a hydraulic jack and a few minutes to do that but it's not a big deal. The problem is storing the big wheels and the jack.

Re: I finally did it...

#5

Re: I finally did it...

Allen Neighbors

>I understand, Steve. It was either make mine easy to move or sell it. I opted for the second. I am through doing flat work. Period.

Glad you got it cleaned out, and glad you got all that off your chest. :)

Re: I finally did it...

#6

Re: I finally did it...

Jimmy Edwards

>Does your tablesaw have tears in its eyes now? They do have feelings you know.

Re: I finally did it...

#7

Steven Antonucci

I though it was crying...

steve antonucci

>but it was just DNA from a roughout I was soaking on it...

Steve