Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Powermatic 4224 on the way! glote

Posts

Powermatic 4224 on the way! glote

#1

Powermatic 4224 on the way! glote

John Kyler

>I ordered my new PM 4224 this week. And so my 7yo daughter didn't feel left out, I ordered her a 1014vsi Jet for Christmas.

I guess I will be like the dog chasing a car..

I don't know what I will do when it catch it. Lathe will be here in about 3 weeks. I'm calling the moving companies in the area to see what it will cost to unload the 4224 from my trailer and 20 feet into the shop.

This sounds like one great lathe from the few I have talked to that have turned on it.

Re: Powermatic 4224 on the way! glote

#2

I see danger here

Randy Johnson Connersville, IN

>One big lathe and one small lathe.

Have you given any thought to how long it will take before you have to ask your daughter if you can use the PM.

Re: Powermatic 4224 on the way! glote

#3

Re: I see danger here

Lan Brady

>Randy,

I was thinking the same thing!

Only it means the shop will soon have two - 4224's!!!!

Congrats on the new arrivals!

Lan

Re: Powermatic 4224 on the way! glote

#4

Re: Powermatic 4224 on the way! glote

Allen Neighbors

>I think that's awesome. I would love to have one of my grandchildren come to me and desire to learn to turn. Just having your daughter in the shop will be a boost to her memories of you. Good on you!

Re: Powermatic 4224 on the way! glote

#5

Re: Powermatic 4224 on the way! glote

Bob Fawcett

>Congratulations!

I think you will love it.

When I got my 3520, it was shipped partially assembled on a pallet. I was able to move it piece by piece into the shop with the help of 1 friend. I know the 4224 weighs a little more, but I bet 2 or 3 strong friends can move.

I had a couple of walmart wooden bar stools in the shop that turned out to be just the right height to set the bed on and bolt the legs up under it. It took both of us to move the bed, but once that was done I could install the headstock and tailstock myself. I lifted the assembled bed and legs with my floorjack.

Re: Powermatic 4224 on the way! glote

#6

Re: Powermatic 4224 on the way! glote

Doug Thompson near Cleveland

>That's a big lathe... Check on a tail gate delivery, if it's a easy 20 feet the pallet jack they carry in the truck should be all you need. They set my 3520 in the garage with a little help from me.

Re: Powermatic 4224 on the way! glote

#7

Re: Powermatic 4224 on the way! glote

John Kyler

>I guess the problem is I work for Rockler and I get e fantastic deal on the lathe, and it will be delivered to the store not the house. So I can use the lift at work to get it onto the trailer... Then I have to get it from there to the garage. I'm thinking I will try to locate a rental truck with a lift gate and I can borrow a pallet jack from work.

All I know is I have a great couple of lathes on the way.