Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Jet live center thread size? Dom?

Posts

Jet live center thread size? Dom?

#1

Jet live center thread size? Dom?

Carol - now in NC Nebraska

>At Indy Fest I got a Jet live center #709933. (Thanks, Mike!) I need to know the thread size for the add on accessories. There was some discussion on SMC with Dom about this center, but this is my favorite forum so I am asking here. Aside from which, what I need to know wasn't there. So what is the thread size for this live center?

The reason I want to know is that Stu on Family Woodworking showed how to make thread-on face plates, jam chucks, etc. by using a Beal tap. So if I have the thread size and get the tap I can make my own accessories. The mini lathe is 1" x 8 and I think I already own that tap. Can't check until I get back to Arizona.

Re: Jet live center thread size? Dom?

#2

Re: Jet live center thread size? Dom?

Dominic Greco in Richboro PA

>Carol,

You wrote:

"At Indy Fest I got a Jet live center #709933. I need to know the thread size for the add on accessories. There was some discussion on SMC with Dom about this center, but this is my favorite forum so I am asking here. Aside from which, what I need to know wasn't there. So what is the thread size for this live center?"

I believe that the Jet center has a 3/4"-10 threading. Same as the Oneway live center. It can use all it's accessories. I know this for a fact since I'm using several Oneway parts with my Jet live center! :>)

Does that help you out?

See ya around,

Dominic

Re: Jet live center thread size? Dom?

#3

Re: Jet live center thread size? Dom?

Carol - now in NC Nebraska

>Thanks again, Dom. I cross posted. I didn't intend to but it has been a crazy day.

Re: Jet live center thread size? Dom?

#4

Re: Jet live center thread size? Dom?

john lucas

>Dom is correct. It's easy to make accesories by simply gluing a 3/4 10 nut onto wood.