Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

My Robust has arrived!

Posts

Re: My Robust has arrived!

#26

Re: Making shavings

Carol - now in NC Nebraska

>I concur with your father-in-law. It is a blessing to be there, but it is also energy zapping. Hanging out here and making a little sawdust from time to time are the things that help keep me in balance. Woodworking is a creative endeavor. Turning is even more so for me.

Now if I could just get something off the the lathe that makes it past the stove.... :)

Workin' on it!

Re: My Robust has arrived!

#27

Steven Antonucci

Do you thread them?

steve antonucci

>

Re: My Robust has arrived!

#28

Re: Making shavings

eliot d

>Carol, I use bent allen head wrenches also to hollow small forms and to begin the hollowing through small openings of larger forms. (Never thought of using a chuck, though; good idea.) I find that I have to sharpen those made form allen heads often. Do you find these to be satisfactory? Have you triedhother kinds of home-made small tools -- e.g the Kelton mini hollowing tools? If so, How do they compare?

Congrats on the Robust.

Re: My Robust has arrived!

#29

Re: Making shavings

eliot d

>Sorry; I ment to write to Brian.

Re: My Robust has arrived!

#30

Shoot, Eliot

Carol - now in NC Nebraska

>I was looking for my shoes to make a run out to the garage to see if the mini morphed into a Robust!

Re: My Robust has arrived!

#31

Re: Making shavings

Brian Hahn in SW Wisconsin

>Thanks Eliot.

I haven't tried other small hollowing tools so I can't compare them. My hollowing experiences have been pretty limited - ornaments one year for Christmas presents and a couple of half-sized djembe drums. The hollow form bug hasn't bitten me yet.

Re: My Robust has arrived!

#32

No, I use a marvelous widget called a screw.

Brian Hahn in SW Wisconsin

>

Re: My Robust has arrived!

#33

Thanks everyone

Brian Hahn in SW Wisconsin

>I think this lathe and I are going to have a wonderful and productive relationship. Now if I can just get some free time to spend with it!

Re: My Robust has arrived!

#34

Steven Antonucci

I meant the outside of your little dowel

steve antonucci

>so that the faceplates and chuck would thread on securely. I'd hate to have an 8# chuck fall on me. The picture looks like it's just pushed on, which means it can probably be knocked off, no?

Steve

Re: My Robust has arrived!

#35

Re: My Robust has arrived!

Bill Grumbine (Kutztown PA)

>Congratulations Brian! I know just how it feels. I got my machine a couple of days before you did, but you beat me to posting about it. Your shop is a lot nicer looking than mine too. I may even pirate a few ideas from what I see there. Good luck with your lathe!

Bill

Re: My Robust has arrived!

#36

I understand your concern.

Brian Hahn in SW Wisconsin

>There's a couple of things here. First, the dowel is pretty much a slip fit so the chuck isn't tilted forward significantly, so there is very little forward lean to make it slide off. Second, the chuck threads bite into the dowel on the top at the front and on the bottom at the rear. This secures it pretty well against vibration, etc. The dowels are on a board that is screwed to the 2x6 wall studs, so it is very solid and secure. Also, the board is in a location where I'd have to move the lathe to stand by it, so my feet will never be in danger.

Another option is to use smaller dowels and tilt them up. I did that for the board behind my Jet mini and found it to be a nuisance. The chuck threads would snag on the tip of the dowel when I was storing or removing the chuck.

Re: My Robust has arrived!

#37

Re: My Robust has arrived!

Brian Hahn in SW Wisconsin

>Thanks Bill. You are welcome to any and all ideas - that's the reason I post them.

Re: My Robust has arrived!

#38

Re: Shoot, Eliot

eliot d

>Right! Wouldn't we all love to have one! I only saw one up close once at that David Ellsworth three-day workshop I took last summer. The five students were supposed to rotate through the different lathes. So I almost got to turn on one. But , as it turned out, we just stayed with the lathe we started on. In my case a Woodfast. I didn't care. Ellsworth commented on some of his lathes: he said he stopped getting the ones he had been buying from England ( "Pole" -something or other) because the exchange rate was killing him. He has no Oneways -- thinks they're fine but not very flexible. I love my PM 3520A, which has the sliding headstock, which for me makes it versatile, especially for hollowing. I also have a non-variable speed Jet Mini, which I use mainly for making small boxes; and I love it.

Sorry about the confusion.