Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

turning lamps

Posts

turning lamps

#1

turning lamps

john lucas

>I am doing a demo on lamp turning tomorrow in Chattanooga. I have made probably a dozen or more lamps over the years in all styles from segmented and stack laminated to solid wood pieces.

For the last few weeks I have been doing research in all of my books looking for lamps. There are extremely few examples. they are fun things to turn with lots of possibilities.

My mother still has one of my first lamps. I'll try to shoot it next time I'm down there. Anyone else have photos of their lamps.

here is the last one that I turned. It's my brick lamp.


img

Re: turning lamps

#2

funky, but I like it

Michael Stadulis, in Gloucester County, NJ

>Hey John,

Newbie question, and related to your design. I'm making my daughter an earring holder stand that I saw in CSUSA catalogue (I think) and I need to turn two disks.......sort of like your lamp base. How should I do that? I've onlt used a faceplate for roughing bowl blanks. Should I glue the turned blank to another piece w/ paper in between, and part it off...or split it...? Any links for meto consider? Thank you in advance

Mike

Re: turning lamps

#3

Re: turning lamps

Karen F

>I like it!! Are all those bricks painted on or woodburned? How long did that take?

Re: turning lamps

#4

Re: turning lamps

john lucas

>Karen I cut the horizontal lines on the lathe with a custom ground screwdriver that resembles a really narrow parting tool. I used a dremel with a bit that was brocken. I reground the tip and then cut the vertical lines using my Ironfire index plate with the router setting on a table that fits in my tool rest banjo.

Then I dyed the wood red and sealed it with lacquer. Then I rubbed drywall mud into the grooves and all over the piece. Then I wiped away all but the grooves with a damp cloth.

The "concrete" was area that were masked off and sprayed with Stone Flek paint. Then they were painted white. I backed the black spray paint can off about 2 feet and sort of squirted at the white until it appeared the gray color that I wanted.

Re: turning lamps

#5

Re: funky, but I like it

john lucas

>Micheal Let me think about that a little. Just off the top of my head I would glue it to a faceplate (hot glue or paper joint) and turn one side. Then I would drill the center hole on the lathe. Then remove this and turn your wasteblock down so there is a tenon sticking out that matches your center hole. Put a few drops of hot glue on the freshly turned side and slide this over the tenon onto the wasteblock. Then turn the other side. A really thin hot butter knife will slide through the glue spots and let you remove the piece.

If you put some finish on the first side before applying the glue it will be much easier to remove the glue residue after words. I wouldn't use a paper joint for the second turning because the yellow glue and paper is really hard to get off.

Re: turning lamps

#6

Aage Rendalen

Great lamp!

Aage Rendalen

>John, I always enjoy looking at what you're making. In my opinion, this is very well done and possibly up there with the best that I've seen of your turnings.