Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

white balance settings on canon A85

Posts

white balance settings on canon A85

#1

white balance settings on canon A85

john lucas

>Keith and others who are interested. I just set up a test on out canon A85 since that is as close as we can get to Keiths camera. The shot on the left is done in Auto white balance using 3200 degree kelvin photo lamps. As you can see it's a little warm in photo lingo, orange to most folks. The photo on the right was done with the white balance setting on the Tungsten setting. That's the little light bulb with short lines around it. These photos were totally unretouched and downloaded in Photoshop. On my monitor which is color balanced the one on the right is correct.

I believe Keith said he was using the tungsten balance setting so the only thing I can think of is his lights may be putting out less than 32oo degrees kelvin. My quartz worklights that I use to teach product photography are actually 2700 dK and they are so slightly warm I don't even color correct. House hold lights are usually anywhere from 2000 to 2400 DK. Even the Reveal bulbs which appear blue to your eye still shoot like tungsten lights and measure about 2400 DK.

So Keith, short of getting together with you and working with your camera I'm still in the dark. I could be your monitor is not correct and when you correct the color it's coming up warm on our monitors.

Re: white balance settings on canon A85

#2

I do not see the photos. Is it me?

Stokes

>

Re: white balance settings on canon A85

#3

No

Tim GC

>

Re: white balance settings on canon A85

#4

Re: Try again John!!

Jamie Donaldson

>

Re: white balance settings on canon A85

#5

just wanted to see if you guys were awake :) 

john lucas

>


img

Re: white balance settings on canon A85

#6

Re: just wanted to see if you guys were awake :)

john lucas

>I turned this piece from stack laminated Oak about 18 years ago give or take a few. I remember gritting my teeth when I cut the base at an angle on the bandsaw.

Re: white balance settings on canon A85

#7

Re: white balance settings on canon A85

Cyril Griesbach

>John, thanks for this info. I expect it to help me as well. In an earlier post I was told to "soften" the light a bit. As I am using the Phrugal Photo set up from Jamie how do I go about softening the light. Would a piece of paper do it?

Re: white balance settings on canon A85

#8

Re: If you have the light fixture ...

Jamie Donaldson

>... aimed up the side and bouncing off the walls then the light should be correctly "presoftened!" Some users aim the light directly at the turning, thus negating the whole reason for the enclosure as a softbox. Check the tutorial on my website tips menu-jamiedonaldsonwoodturner.com

Re: white balance settings on canon A85

#9

Re: John- I've noticed that some .....

Jamie Donaldson

>...uploaded images are "warmed up" when posted on certain sites, althouogh that is not supposed to happen in digital theory. Sometimes my posts on WOW have a slight warm appearance not in the original, and it varies from time to time- must be the weather!!

Re: white balance settings on canon A85

#10

Re: white balance settings on canon A85

john lucas

>Softening light may mean different things to different people. When I think of a softer light I think of a larger light source. You get this by moving the light further form your panel on the frugal set up or by moving it so it further from the translucent panels on my set up so that it lights more of the panel. This produces a softer hot spot.

The general rule of thumb is a large light source produces soft large highlights and soft edge not so harsh shadows. A small light source makes small harsh highlights and shadow with harsh edges. Small lights are good for showing off fine details like wire brushed designs and fine carvings but you have to deal with the bad highlight if the piece is reflective.

This photo was done through 2 panels that are white bed sheets about 20 by 30 inches. There wasn't a panel on the top but the tall panels sort of help the light wrap over the top. The light on the right made a cirlce about 20" in diameter on the panel. I move the left light about twice as far away so it lit more of the left panel and since it's further away it is less bright. It helps that this piece has a very satin finish from all the years in the office.

Re: white balance settings on canon A85

#11

Re: If you have the light fixture ...

john lucas

>The same is true with the panels. If yo move the light up too close you create a smaller harsher highlight. Sometimes that's handy. It's not necessary to leave the light in the same position all the time.

Re: white balance settings on canon A85

#12

Keith Tompkins

Re: white balance settings on canon A85

keith tompkins

>HI John, thanks so much for going through the trouble. I'm going to work on my camera a bit more. Using "T" slide film in my 35mm camera, the background is perfect. With the tungsten setting on my digital, big-time yellow.

I'll try the custom mode in my digital, I'll see what happens...I'll let you know. thanks again, Keith

Re: white balance settings on canon A85

#13

Steven Antonucci

And I thought that your spindle was bent...

steve antonucci

>but I'll stand by my original guess- the turner is off center, not the work...

Steve