Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Doug Thompson Bowl Gouge

Posts

Doug Thompson Bowl Gouge

#1

Doug Thompson Bowl Gouge

Jim Rutten

>I ordered Doug Thompson's bowl gouge last week. Three day shipping which I needed because tomorrow my wife and I are driving to Gatlinburg Tennessee so I can take a class at Arrowmont. I am taking a green woodturning class with Bobby Clemons. My plan is to use my Crown bowl gouge for hollowing and the gouge from Doug Thompson for the finish cut. Thanks for the quick turn around Doug!

Re: Doug Thompson Bowl Gouge

#2

Re: Doug Thompson Bowl Gouge

john lucas

>Say Hi to Bobby for me. He is a good friend. I'll bet you'll end up using the thompson gouge for everything once you get used to it. I started out in reverse. I thought I would use the thompson gouge for roughing and my other HSS gouge for finishing. Now the other gouges just sit there with occasional use. I tend to reach for the thompson gouge all the time.

Re: Doug Thompson Bowl Gouge

#3

Re: Doug Thompson Bowl Gouge

Don in Central Illinois

>John, did you regrind the Thompson, or use as is? I have been learning on the Ellsworth grind and am a little leery of trying to learn a new grind.

Re: Doug Thompson Bowl Gouge

#4

Re: Doug Thompson Bowl Gouge

Jim Rutten

>I haven't gotten a chance to use it yet so the class will be my first oppotunity. I wondered about regrinding it too but decided to try it as it is before regrinding.

Re: Doug Thompson Bowl Gouge

#5

As another Thompson tool ...

Ed Moore

>devotee I have the vee bowl gouges, 3/8, 1/2, and 5/8. I decided not to change the grind and I am glad that I made that decision. Like John, these are my go-to gouges.

Doug likes his 3/8" detail gouge best. I have that and the regular 3/8" spindle gouge - which I like better than the detail gouge. It is a matter of what one is used to I guess.

They are excellent tools. I see a 3/4" skew and a scraper soon.

Ed

Re: Doug Thompson Bowl Gouge

#6

Re: Let Bobby help with that .......

Jamie Donaldson

>...decision. Every turner has a favorite grind, and many are slight variations from what would be considered a named standard like an Ellsworth. I studied with both Ellsworth and John Jordan, and my "standard" bowl gouge grind is a version about half way between their "standard" grinds.

Re: Doug Thompson Bowl Gouge

#7

Re: Doug Thompson Bowl Gouge

john lucas

>Don I didn't change the grind but it's very close to the Ellsworth grind in shape. It might vary a little in the actual angles. I use the Oneway system but mine isn't the exact angle Oneway suggests so I probably reground his very slightly.

Re: Doug Thompson Bowl Gouge

#8

A question?

Jim Rutten

>I was planning on trying out the current grind at the class before any regrinding. My question is I had to steal the tool handle from my eliminator to put on this one. I picked this handle up at SWAT one year and should have bought two or three more. Anyone know where I can get a new handle (besides making it I prefer the heft of the manufactured handles) at a price that won't break the pig (I would have said bank but we have one of those big glass pigs full of pennies so in my case it would be the pig)?

Re: Doug Thompson Bowl Gouge

#9

Re: Doug Thompson Bowl Gouge

Fog Tanner

>When I got my Thompson gouges, I used then right out of the box. On the 5/8" the first time I had to sharpen it (after several bowls), I used my Tormek and was able to duplicate the grind that Doug had used. The next time I had to sharpen it (after a lot more bowls this time), I used my Ellsworth jig on a 100 grit dry grinder. The grind that Doug uses is close enough to the Ellsworth that I couldn't tell enough difference to worry about.

All the other Thompson gouges (1/2" and 3/8" bowl, spindle, and detail) are sharpened on my Tormek with the same grind as my M2 gouges. That way I can switch between my Thompson and M2 when I have to. Same with the 3/4" and 1/2" skews.

Re: Doug Thompson Bowl Gouge

#10

Re: Doug Thompson Bowl Gouge

Doug Thompson near Cleveland

>Jim, the USPS priority mail is very good most of the time. I have one package right now that is two days late :( it's only going to VT.

Try the grind out of the package it might work for your style of woodturning... if not change it. The truth is once the tool is ground the first time it now has your grind. No one grinds the same.

Re: Doug Thompson Bowl Gouge

#11

Re: As another Thompson tool ...

Doug Thompson near Cleveland

>The 3/8 detail is one of the tools I used and said "this is too easy" That's why it's (IMO) the best spindle tool.

Jim, in January I'll start working on a metal handle. Hopefully plan A can be done for a good price that won't break the bank, if not plan B will work.

Fog, take me out of your spam file LoL Just kidding. I sent a email about a month ago and it was returned. I haven't seen you post much and thought you took some time off.

Thanks everyone,

Doug

Re: Doug Thompson Bowl Gouge

#12

Bill Blasic

Re: Doug Thompson Bowl Gouge

Bill Blasic

>On Dougs site you will find his set up for sharpening his tools with the Wolverine Jig with Vari-grind attachment. I picked up four more of Doug's gouges at OVWG Turning 2007 last weekend as these gouges have become the main tools that I use. They stay sharper longer! Plus they are affordable! Thanks Doug.