Turning boxes... German style *LINK*
dwr
>... found this little gem on YouTube. Pay special attention to his tools, methods and techniques... interesting to say the least. Worth the 10 minutes to watch.
Knowledge You Can Build On — Est. 1998
Turning boxes... German style *LINK*
dwr
>... found this little gem on YouTube. Pay special attention to his tools, methods and techniques... interesting to say the least. Worth the 10 minutes to watch.
Re: Turning boxes... German style
Allen Neighbors
>Hi, Dave. From what I've seen so far, it's going to be good. I hope I can stay awake long enough for my dial-up to load it. :(
Anyone that can sharpen like that while pedalling a lathe is bound to be an addicted woodturner!
Thanks for posting.
Well worth watching!
Chuck Engstrom
>Excellent!! It's remarkable how little has changed. Thanks for finding this.
Chuck
Re: Turning boxes... German style
Carole Valentine
>Way cool! I wish the video was a little clearer so I could see that wicked looking hook-like tool better.
Re: Turning boxes... German style
E.T.
>Great video. Must be THE very first turning instruction movie. Sort of like an archiological find. The guy even put on his safety glasses before starting the lathe. He could use longer tool handles though. ET
And soundtrack by Jessica Rabbit
steve antonucci
>The times have changed. A screw hole in every piece, sanded one grit, and turned with spindle tools. Oh the humanity!
And the whole time in the background they played that song from "Who Framed Roger Rabbit?"...
Very cool.
Steve
Re: Turning boxes... German style
Peter Hyde
>Excellent!
I sat and watched it 4 or 5 times and several things were different to what is the norm today. First check out the height of his tool rest, it's way up above centre and he is cutting with the handle dropped way down. Then the tools. Shallow flute round nose gouges exactly like the Taylor forged HSS at LV. Then there is the wicked looking spear shaped hook tool. Also all done on a screw chuck which means the bottommust be pretty thick or there is a hole dead centre. All of this kind of falls in line with the British turner Frank Pain's way of doing things in that time period. Thanks for the link.
Re: Turning boxes... German style
Mark Paulley
>Hello all,
Did you noticed he moved his body swaying back and forth and kept the tools in close to his body? And what wicked tools!!!!!!!!!!!!!!
Mark
Did you notice?
Ron in Drums PA
>Did you notice him using the...
Most Excellant
Thanks for posting this dwr
Re: Did you notice?
Glenn Hodges, Nashville, GA
>I also use the skew like he does in this demo.
Me thinks we are...
dwr
>... spoiled a bit!
I wonder how many of us could, or would even try to, produce the same piece using his tools and techniques?
It's "just one more tool and I will be a better turner", then you see this guy, look back at the wall full of tools and six catalogs on the bench and ask yourself a whole bunch of silent questions!
I was amazed at how well the lid fit the body... and how about that "first generation Tormek grinder?"
Glad you all enjoyed it,
Dave
Re: Turning boxes... German style
john lucas
>I agree. It looked like the hook tool only had a slight curve and he used it with the cutting edge almost stright up with the outside bevel rubbing. That's almost exactly the way I use the Hunter tool on the middle of boxes.
Re: Me thinks we are...
Carole Valentine
>I would LOVE to have one of those pedal grinders!
Hard to beat skill....
Mike Stafford
>The consummate skill with which this gentleman turned made the task at hand look deceptively simple. It was very impressive and I think I wore the video out looking at it. I learn from everyone I see turn and this gentleman 7 decades removed is still teaching.
Re: Turning boxes... German style
JohnKJordan in East TN
>>hook tool
But did you notice the catches with the hook tool, especially at 06:06?
JKJ
Re: Turning boxes... German style
Robert D. Macgregor
>I noticed the catches, too. Also, that tool reminded me of the tool that the spring pole lathe turner used to carve the center nub off (by hand, though; not while turning).