Black Ash bowl
Cyril Griesbach
>This is from a piece of wood I got at the club wood raffle. I't 9x31/2" and finished with Danish Oil and Beal buffed. Comments and critiques are welcome.
Knowledge You Can Build On — Est. 1998
Black Ash bowl
Cyril Griesbach
>This is from a piece of wood I got at the club wood raffle. I't 9x31/2" and finished with Danish Oil and Beal buffed. Comments and critiques are welcome.
Intuition tells me it's better than the picture
steve antonucci
>The lighting is kind of flat, but that's coming from me who's been know to take pictures on my car hood and garbage cans...
Looks like s great bowl, but the angle and lighting flatten it out.
Steven
Re: Black Ash bowl
Ken Grunke from SW WI
>Cyril, the profile looks like a dead-on perfect catenary curve to me. Nice to see you posting your work, you ought to crop in a bit closer to show it off better!
Re: Black Ash bowl
Allen Neighbors
>I like it, Cyril. Makes me want to go pop some corn. :) Beautiful form.
If you'll move one light a little closer, or, if you're using only one, point it a little more toward the piece, it might keep it from being such flat lighting. Or, it could be that you need to over-expose by one stop...
Heck, I've not been in photography since 1985 or so, so I've forgotten most of it. C'mon, John or Jamie....
Re: Black Ash bowl
Cyril Griesbach
>Thanks guys. As a photographer I'm still a work in progress. Steve, you're right.
Re: Allen didn't forget too much...
Jamie Donaldson
>... because this image is underexposed- try setting your exposure compensation to +1 if your camera has manual exposure adjustments. Then zoom in to fill the frame. Like everything else, cameras take practice, and reading the instructions! ;-)))
Re: Allen didn't forget too much...
Cyril Griesbach
>Now you've gone and done it, Jamie. The old reading instructions bugabo. We all know men tend to do that as a last resort.
Re: Black Ash bowl
George Van
>This is a great shape to display this nicely grained bowl Cyril. The inward turned rim works well. It appear that it was tooled very well before sanding as the texture looks rather even which would not be the case if it was sanded into shape and became wave between the rings. All photo suggestions have been given. Thanks for posting, George.