Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Birch Hollow Vessel......

Posts

Birch Hollow Vessel......

#1

Birch Hollow Vessel......

Wally Dickerman in Arizona

>Still having fun with my new toy. My HS piercing tool. This one has some texturing done with the same tool. It's yellow birch, 7.5 inches tall x 5.5 inches wide, walls 1/16th inch as they must be for piercing. Comments?

Wally


img

Re: Birch Hollow Vessel......

#2

Re: Birch Hollow Vessel......

Richard Jones

>Beautiful piece, Wally. I especially like the borders that you left that give some visual separation to the different spaces. Sort of like several pieces in one.

Also excellent use of the spalting. I like the way you used that as it's own "medium."

My first glance reminded me of the ancient maritime charts. A very unique piece, for sure.

Can you share some info about the piercing tool?

Rich

Re: Birch Hollow Vessel......

#3

Re: Birch Hollow Vessel......

George Van

>�Morning Wally, I was surprised after a weekend of grouse/woodcock hunting with the setter when I started the computer and saw your email and then this post. You sure did make good use of this chunk of wood and turned it into a piece of art. It is interesting how you turned a negative character in a blank into an enhancement, and you have done it very well! I like the addition of the texturing to the piercing. I like the borders you created with texturing and piercing areas; it sets your work off well. Not having a piercing tool I had been playing with texture after seeing your previous piercing pieces and think it adds to the appearance of the spalted surface when areas of spalt are missing. Your piercing and texturing follow the form of the piece very well. Thanks for posting.

Re: Birch Hollow Vessel......

#4

Steven Antonucci

I like it, but I have a question...

steve antonucci

>I see that you followed the spalt line for the texturing and carving, but is there a reason you didn't continue it to the top and bottom of the vessel? The "plain wood" continues on beyond your embellishment and it makes it appear to be "on it" vs. "part of it" (if that makes sense...?)

Steven

Re: Birch Hollow Vessel......

#5

Re: Is this piece named "Utah"?

Al Crandall

>I recognize Utah, but you screwed up big time on Colorado and Wyoming. Anyway, I like it.

Re: Birch Hollow Vessel......

#6

Re: Dang, this old dog just......

Jamie Donaldson

>... keeps on learning new tricks!! Wally Wonderful just keeps coming up with wonderful work every day!! I'm a fan of yours Wally!!;-)))

Re: Birch Hollow Vessel......

#7

Re: I like it, but I have a question...

Wally Dickerman in Arizona

>Thanks Steve, The texturing and piercing is done in a planned design and is not just to fill in space. Actually this piece was planned in thirds. One third has some nice spalting and figure. the other third has a different design of texturing etc.

Wally


img

Re: Birch Hollow Vessel......

#8

Re: I like it, but I have a question... 

Wally Dickerman in Arizona

>


img

Re: Birch Hollow Vessel......

#9

Re: Is this piece named "Utah"?

Wally Dickerman in Arizona

>Didn't even get in Arizona, Al.

Wally

Re: Birch Hollow Vessel......

#10

Re: Dang, this old dog just......

Wally Dickerman in Arizona

>Thanks Jamie. Woodturning has been a learning experience for 71 years.

Wally Wonderful?....hey that's what the girls used to call me.

Wally

Re: Birch Hollow Vessel......

#11

Re:Wally, I thought that you ......

Jamie Donaldson

>... told me the girls still call you by that name??? ;-)))

Re: Birch Hollow Vessel......

#12

Re:Wally, I thought that you ......

Wally Dickerman in Arizona

>Jamie, they do. They're just older girls with a few wrinkles and sags here and there, but still with a sparkle in their eye.

Wally

Re: Birch Hollow Vessel......

#13

Steven Antonucci

Let me clarify the orignal question

steve antonucci

>What made you put that design only where it is an not all the way vertically from top to bottom? It's a very flowing shape with an "abstract imbellishment with some very straight lines. Was it just doodling or were you trying to represent something between the texture and the piercing?

I'm not buying Utah and Arizona, either... :-)

steve

Re: Birch Hollow Vessel......

#14

Re: Let me clarify the orignal question

Wally Dickerman in Arizona

>Steve, without you seeing the whole piece, perhaps I can't explain it fully. If you'll look at all three pics you'll see that the enhancment design has a curve on one side that not only follows the spalting, it mirrors the form of the vessel. The straight line on the side mirrors the straight line on the texturing or piercing on the side of the other third of the vessel. There is an open area of a little over of an inch between that is quite highly figured. I could have textured farther down the piece but I chose not to.

Hope I explained it well enough. Viewing a one dimensional pic doesn't always show what the piece actually looks like.

Wally

Re: Birch Hollow Vessel......

#15

Re: Let me clarify the orignal question

Wally Dickerman in Arizona

>There is lots of room for improvement....I'm just getting started with the piercing. I do appreciate your comments.

Wally

Re: Birch Hollow Vessel......

#16

Steven Antonucci

Please don't take it as negative

steve antonucci

>I spent the better part of the weekend in deep conversation with a bunch of turners and the topic of form and design is foremost in my mind.

I didn't mean to imply that there was anything wrong with what you had done. I just didn't know WHY you had done it. I like it, and it just struck me as odd that it seemed to stop before the vessel did. I assumed that you had a reason, and I was trying to get inside your head for a second.

Steve

P.S. I think that I need a break from turning after the last few days. My head was swimming after Peter Exton's rotation and only further compounded by the hours I spent talking theory with Keith Tompkins.

Re: Birch Hollow Vessel......

#17

Re: Please don't take it as negative

Wally Dickerman in Arizona

>Steve, I don't think that there is anyone on WC who takes form and design more seriously than I do. I've written articles on it and teach it in my classes.

Wally

Re: Birch Hollow Vessel......

#18

Keith Tompkins

Re: Please don't take it as negative

keith tompkins

>Steve, glad I could help!! :)

Nice work Wally....I've found yellow birch, also known around here as grey birch, to be a very hard, dense wood. I've gotten blisters turning dry yellow birch burl...the tool was so hot!

I'm glad I got to see your pieces in person (and you as well) in Portland.

Re: Birch Hollow Vessel......

#19

Re: Please don't take it as negative

russ Fairfield

>Wally,

Why does there have to be a reason?? Or, a pattern? If there is a reason, there is also logic, and that means there are rules that have to be followed. Shouldn't the "art" be in the eye of the artist alone, and for everyone else to figure out??

Re: Birch Hollow Vessel......

#20

Steven Antonucci

I didn't say there HAD to be a reason...

steve antonucci

>I was asking if there WAS a reason.

If Wally had pierced a circle, I would say "That's a circle." He didn't pierce a circle, but rather a somewhat abstract pair of forms. All I was asking was "Is there any significance to those forms or are they just abstracts?"

Wally did use "rules" in this (1/3 of the vessel 1/16" thickness,...)so there is no escaping "the formula". I don't think it's limiting

at all, and I actually thought that this was in some way related to his "giraffe pattern" vessel in a negative space (maybe subconsciously?), but I feel like I've been misinterpretted from the original reason I asked the question (which was to seek an answer I did not have...)

Steve

Re: Birch Hollow Vessel......

#21

Right On, Russ.......

Wally Dickerman in Arizona

>

Re: Birch Hollow Vessel......

#22

Steven Antonucci

Forget I asked- I won't make that mistake twice...

steve antonucci

>