Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Stafford inspired box

Posts

Stafford inspired box

#1

Stafford inspired box

Danny Wells

>I've turned boxes before, but have always been impressed with Mike's boxes. Then when I read his article here, I was inspired to try again. Plus I have a new Hunter tool that I picked up at SWAT last weekend that needed some breaking in. Love the Hunter tool. It takes a little getting used to but not long. Here's a Kingwood box I turned this afternoon, 2 1/2" high and 1 7/8 dia. I didn't quite get the curve on the top that I wanted but was in a hurry to get it done. Critiques welcome.


img

Re: Stafford inspired box

#2

Re: Stafford inspired box-PIC 2

Danny Wells

>I used cellulose sealer and Renaissance wax as a finish. The Hunter tool reduced the amount of sanding needed.


img

Re: Stafford inspired box

#3

Mike Stafford

Re: Stafford inspired box-PIC 2

Mike Stafford

>Danny, you flatter me. Thank you. You did a fine job on your box. Kingwood should have responded very well to the Hunter Tool as I find that more dense woods like this cut cleanly with this tool. Your grain matchup is excellent and your finish looks smooth as silk. Keep making boxess!!! I want everyone to make boxes!

Re: Stafford inspired box

#4

Steven Antonucci

Do you have enough wood left in the top...?

steve antonucci

>to rechuck and return it? If there was still some wood, I'd recut it to have a better curve. (Also looks like a there is a tool mark in the lid.) If there wasn't, I'd probably cut through it and inlay a piece of some contrasting wood/metal from your turkey call scraps.

I'd bet you'll be a lot happier with it if you do.

Steve

Re: Stafford inspired box

#5

Re: Stafford inspired box

Bob Edwards

>Nice work Danny but you won't call many ducks with this!!

Good to see you in another direction.

Bob Edwards

San Antonio

Re: Stafford inspired box

#6

Re: Do you have enough wood left in the top...?

Danny Wells

>Yes there is enough wood left in the top Steve, good idea. I might try the inlay idea anyway. Thanks,

Danny

Re: Stafford inspired box

#7

Re: Stafford inspired box

Danny Wells

>Thanks Bob,

Sometimes I just have to do something for me or to express myself in a gift for someone.

Missed you at SWAT this year. I took a young turner friend who is just getting started. He had a great time. I did too. I took three of David Marks seminars and even had lunch with him. He's a really nice guy, easy going and funny too, nothing like you see him on the TV show.

Danny

Re: Stafford inspired box

#8

Re:Danny- I have found it's too often....

Jamie Donaldson

>...a mistake to attempt to re-turn a finished piece. Rather than struggle to remake a piece, use it as a learning experience and example of what you wish could be better on the next one. O'Tool's Law states that disaster already awaits the unwary, so put this one on the shelf and make a new improved example which incorporates the changes you desire.

Re: Stafford inspired box

#9

Mike Stafford

I concur with Jamie...

Mike Stafford

>So what if this box is not perfect. What does it matter? Set it aside and use it to measure where you are 10 boxes from now, 50 boxes from now, 100 boxes from now. Leave it alone and be proud of what you have done. I don't have my first box and I wish I did. This is a very good first effort, Danny. Enjoy what you have accomplished and try those other things on another box.

Re: Stafford inspired box

#10

Re: I concur with Jamie...

Danny Wells

>That's sounds like good advice. I've tried remounting other turnings after they were completed...never seemed to work out quite right.

Thanks.

Danny