OVWG report, please!
Ed Moore
>I attended the OVWG Smposium in 2003 and 2005 and wish that I could have been there this past weekend. I hope this year's attendees report in.
Ed
Knowledge You Can Build On — Est. 1998
OVWG report, please!
Ed Moore
>I attended the OVWG Smposium in 2003 and 2005 and wish that I could have been there this past weekend. I hope this year's attendees report in.
Ed
It was great.
Dave Shombert
>Hi Ed -
In my opinion, it was every bit as enjoyable as the past ones have been. I got to see some demonstrators who I hadn't seen before (Graeme Priddle, Nick Cook) and there was a lot of variety. Mark Kauder did a GREAT job in his demo, which came in several installments over the three days. Trent Bosch was also a big hit, as was WC's Molly Winton.
There were the usual vendors, plus a couple of new ones, e.g., Doug Thompson and an outfit calling themselves Australian Burl or something like that. Doug sold a bunch of gouges but I think he donated even more to the auction. Ruth had a nice display and drew a lot of interest. OVWG member Pete Kekel was there as a vendor of exotic woods and had some drop-dead gorgeous pieces in his selection. Oneway had one of their new sit-down lathes, which got a lot of interest.
Friday night, they paired up the major demonstrators and had them turn something as a team, to be auctioned off on Saturday. It appeared to be pretty spontaneous, although it was crowded and a little hard to tell what was going on. The Saturday night auction was a lot of fun and generated over $8k, as I recall. John Hill did his usual good job of mixing auctioneering skill with entertainment.
Maybe the biggest news is the new dining room. Ed - wasn't it you who took a spill in the old dining room in 05? That place was very crowded and hard to navigate. The new one is about a bazillion percent better - spacious, well lighted, close to the demo building, etc. I have to add that the food is - uh, how shall I put this - every bit as good as it used to be.
The weather was pretty much perfect. I didn't hear any attendance figures, but I'd guess it was at least as many as last year and maybe more. At one point, someone asked the assembled crowd for a show of hands of first-time attendees. A LOT of hands went up. I've been every year since 01 and I saw a lot of familiar faces. Some new blood took over the management of OVWG in the past year, and they did a super job of keeping this great event going.
We missed you, Ed. See you in 09.
Dave Shombert
Elkins, WV
Guilty as charged!
Ed Moore
>Dave,
It WAS me who tripped over the back leg of a chair and fell and fell and fell, until I landed on a table. The occupants of the table had plenty of time to evacuate, but I still felt bad about it. Possibly by now I am forgiven. [grin].
It sounds like it was another great time at OVWG. I'm glad that you enjoyed it for me.
Thanks,
Ed
Re: It was great.
Bill Noce in Northeast Ohio
>I can only repeat what Dave said Turning 2007 was a great time. But he forgot one person who did a great demo for her first an that was Jennifer Shirley who's minature hollow forms are amazing. Its was a great time talk to old friends who you meet in previuos years and to meet new. Bill
Maybe next time
Randy Johnson Connersville, IN
>I would have liked to attend the event - being new at this part of woodworking I have never been to anything like it, but circumstances this time around made it too difficult.
The really bad part about it is that I was within a few miles of the location four times a day three days last week as I passed through the intersection of IN 1 and IN 46 in St Leon. The other two days I was through the intersection twice, but it was always in a company truck on company time.
After two weeks of standby plus my regular forty hour job I had too much to do at home.
Re: OVWG report, please!
tek-Brunswick, Ohio
>I was a little disappointed in the instant gallery. The turnings there were of top quality, but there weren't as many as I expected. I did my part and brought 3 of mine. Clay Foster, Nick Cook, and Trent Bosh were all worthwhile. The burning demo with, Gram Priddle, Molly Winton, and Andi Wolf, was really interesting. They gave three different approaches to using electric burners to enhance work. Throw in Nick Cook's and Clay Foster's torch work and you had the weekend of fire! I hope I use some of these techniques, before they fall out of my head!
Tom
Re: OVWG report, please!
Bill Blasic
>How could one go wrong with a line up consisting of Nick Cook, Mark Sfirri, Trent Bosch, Graeme Priddle, Molly Winton and a host of others. The first time demo by Jennifer Shirley which I mentioned in an earlier post was most impressive. A great grid of vendors including Doug Thompson with his tools (which he donated 20 of to the auction). Plus three square meals a day just steps from the demo area and great weather. It doesn't get much better than that! Already looking forward to Turning 2009.
Re: There was a whole lot of burning ....
Jamie Donaldson
>...and texturing going on, and the valley was hazy BLUE with the smoke. Huummm, nobody mentioned that I took the Phrugal Photo Studio demo on the road- did y'all skip that part of the feativities?? Then you won't have any excuses if you post some poor quality images here!! ;-)))
Re: OVWG report, please!
mike hamilton
>The folks from Cincinnati put on a great event. My first trip to this event and I will definitely go back. Wonderful turnings, wonderful instructors, great setting and facilities.
I wore my WC t-shirt one day and got a hello out of one stranger - Jamie Donaldson, what a class guy. I noticed one other WC logo and introduced myself - Steve Shanesy running the camera for Nick Cook (once a media guy, always a media guy?).
WCer Doug Thompson had a pretty good weekend there as a vendor - you couldn't have wiped the grin off his face with a crowbar.
Regards,
Mike Hamilton
Re: OVWG report, please!
Doug Thompson near Cleveland
>What a beautiful setting to hold a symposium, the membership of the OVWG did a first class job and you couldn't ask for more.
I was nice to finally place a face to a name for so many people I've talked to on the internet and to meet so many new people... it's overwhelming.
The credit card machine finally made it home, a few days late :( Live and learn.
I finally got to meet Ruth Niles... what a wonderful person plus she has the best booth of the entire show.
I am most proud of the folks who donated money at the auction, the tools brought in over a 1,000 dollars for the club... my hat is off to everyone who supported this toolmaker over the weekend to make this happen. Thank you.
Re: There was a whole lot of burning ....
Mac
>Jamie, You did a bang-up job with the cameras in the Graeme,Molly,Andi event....