>This is great. As someone who demonstrates on a spring pole lathe I'm not even in the same leaque as robin wood. I guess I better sharpen my ring tool and get to practicing.
Re: spring pole lathe vs powered lathe, cool *LINK*
Darrell in Oakville
>John, you beat me to the punch!
I can't post from work, so by the time dinner was over and I had time to get onto the computer (read: kick The Kidz off) you had already posted the YouTube link.
I've forged a couple of hook tools, and turned two bowls on my pole lathe. I will admit to being WAY WAY slower than Robin. He's got another video on YouTube that shows his technique a bit more clearly. I doubt I will ever get as good as him, but now I am inspired to try another bowl.
Darrell
new member of the Association of Pole-Lathe Turners :^)
>That was pretty amazing. I guess I have to start looking at U-tube more. I still want to try the lathe flowers that was on U-tube and shared on this forum.
Re: spring pole lathe vs powered lathe, cool *LINK*
>Seeing this raises a question for me... Is the message here that hook/ring tools are just as quick as gouges in skilled hands? Or, am I reading too much into things and should just appreciate how cool pole lathes are and be done with it?
Thanks for sharing,
Steve Kubien
Re: spring pole lathe vs powered lathe, cool *LINK*
>I'll agree with Jorge. It's the turner. However ring tools and hook tools do have their place. The main reason a hook tool is used on a spring pole lathe is that they are sharpened at a very narrow angle so it takes less force go through the wood. This works really well in green wood. Because you are rotating the wood through the tool slower than a powered lathe the tool holds an edge longer. It would dull fairly quickly on a powered lathe.
Re: spring pole lathe vs powered lathe, cool *LINK*