Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Chain Saw Filing Guide *LINK*

Posts

Chain Saw Filing Guide *LINK*

#1

Chain Saw Filing Guide *LINK*

Stuart Johnson

>Now that I have a good chain saw it is time I learn to sharpen the chain. I know from past experience I need a jig if I want to sharpen anything past the dull butter knife stage.

Have any of you used the Granberg filing guide or anything similar? If so how do you like it and if not what do you use?


Granberg Filing Guide

Re: Chain Saw Filing Guide *LINK*

#2

Re: Chain Saw Filing Guide

JohnKJordan in East TN

>>I know from past experience I need a jig if I want to

>sharpen anything past the dull butter knife stage.

I can agree with this when sharpening turning tools, plane irons, etc. I use the jigs for everything.

However, I don't find a need for a jig for my chain saws although I used one at one time. And none of the professional tree cutting people I know use a jig - they just sit down for 10 minutes in the shade with a file.

For one thing, the tooth itself guides the file. Given the proper size file, as long as you hold the file level and at approximately the correct angle, once you learn the basics it is hard to go wrong. Each tooth on the chains I use have a scribed line to remind of the correct angle. And unlike plane irons, chain saw teeth are surprisingly tolerant of small variations in cutting edge geometry.

I'm not saying a jig is not useful and not needed by some, but I think the average person can sharpen without one with just a little practice.

JKJ

Re: Chain Saw Filing Guide *LINK*

#3

Re: Chain Saw Filing Guide

Ken Oakley-Sunny St. Cloud, Fla.

>Maybe I am just lazy, but my local Stihl dealer will sharpen any chain for $4.00 on a machine that probably cost him a few bucks. And he can do it in 15 minutes if I want to wait. I am sure he does a better job then I could ever hope to do. Just my $0.02.

Re: Chain Saw Filing Guide *LINK*

#4

Re: Chain Saw Filing Guide

Ace Foster in Port Orchard

>On the other hand, if you're in the middle of a job and try to cut a rock or a little dirt, it's good to have some way to touch up the edge on the job. The Granberg rig will help. There are also a number of simpler, and marginally cheaper, guides that also help.

On the third hand, in better than fifty years, I have been unable to train my hands to sharpen the two sides of a chain uniformly. The result is that after three or four manual sharpenings, I find the saw cutting scraunchwise. At that point, it's time to take the chain to the local sharpening shop and have it made straight again on the machine.

A spare chain is another useful thing to have along in the field. And safety gear, but you knew that.

Ace

Re: Chain Saw Filing Guide *LINK*

#5

Re: Chain Saw Filing Guide

Mike Jones

>I have used several different filing guides and generally found them to be just more fuss and bother...never at hand when needed etc. Learning to file freehand taught me some useful lessons about why the saw was not cutting "right".

I put the bar in a bench vise to hold the body solid, to get the bar and chain in good light, and to enable me to use both hands through the stroke.

Re: Chain Saw Filing Guide *LINK*

#6

Re: Chain Saw Filing Guide

Brian Hahn in SW Wisconsin

>I use the Oregon guide, costs about $5.50 including the file, and available just about everywhere. It is simple and easy to use, and small enough that you can take it with you for emergency touch-ups.

Re: Chain Saw Filing Guide *LINK*

#7

Re: Chain Saw Filing Guide

Don in Central Illinois

>Scraunchwise??

Re: Chain Saw Filing Guide *LINK*

#8

Jim DeLaney, Austintown, Ohio

Re: Chain Saw Filing Guide

Jim DeLaney, Austintown, Ohio

>Yeah, it's the one I use. I got mine from Lee Valley about three years ago.

Back when I lived in the Pacific Northwest, about thirty years ago, I had what looked like an earlier version of the same jig. That one got a real workout, since I was cutting firewood nearly every weekend, with a big Poulin.

Now, my little Stihl only gets exercised three or four times a year.

Jim D.

Re: Chain Saw Filing Guide *LINK*

#9

Re: Chain Saw Filing Guide

Lan Brady

>Stuart,

I use this file system for 20 years. I like it. I am a weekend warrior, not a logger. I like the adjustability because i do have one chain that I sharpen differently for ripping. My chains last longer with the consistency. I admire the folks that can sharpen one freehand, but I am not successful at that.

Good Luck, Lan

Re: Chain Saw Filing Guide *LINK*

#10

spare chain

JohnKJordan in East TN

>>A spare chain is another useful thing to have along in the field...

Along with a chain, a very good hint I learned long ago - take a spare bar as well. That way if you get the saw pinched you can remove the saw head from the bar, install the spare bar and chain, and cut the jammed bar and chain out of the tree!

Also, if anyone has never tried them, try the plastic wedges. It's amazing how well they work, especially in tricky situations.

JKJ

Re: Chain Saw Filing Guide *LINK*

#11

Re: Chain Saw Filing Guide

don lewonczyk

>I have the craftmans version and it works great. I file free hand in the field but using the jig helps you do a better job at free hand filling kind of puts you in the grove so to speak. I sharpened two chains the other day one with the jig and one free hand and although they both cut good the one sharpened on the jig was more uniform. I also have a cheap HF electric sharpener and that is only good for the trash can, paid 40.00 on sale and its a piece of junk! If you bought the jig for 25.00 you won't go wrong. Good Luck, Don L

Re: Chain Saw Filing Guide *LINK*

#12

Thanks

Stuart Johnson

>for the input. I'll buy a second chain to have one on hand but I don't or at least haven't gone out in the field to cut up anything in over 20 years. And, I bought my Craftmen at that time and ended up paying to have it sharpened. That wasn't too bad because it usually wore me out before it would start so I didn't cut a lot.

Re: Chain Saw Filing Guide *LINK*

#13

Re: Chain Saw Filing Guide

Carole Valentine

>I'm with you on this one, John. Jigs are just a bother to me. I once took my chain to be sharpened by a "professional" (ie Stihl) to see if it cut better than when I sharpened it myself. They took off half the depth of the tooth and the chain wouldn't cut butter. The chain was useless when they finished with it.

I find it very easy to sharpen without any jigs, but the key is to not let the chain get in really bad shape to begin with. 3 light strokes on each tooth generally does the job for me. You can tell when your doing it right - if you are fighting the file, you are doing something wrong. I am amazed at how dull some people let their chains get before they sharpen them.

Re: Chain Saw Filing Guide *LINK*

#14

Re: Chain Saw Filing Guide

JohnKJordan in East TN

>>They took off half the depth of the tooth...

I understand they usually set the machine to sharpen the smallest tooth then take each tooth down to match. Yikes, what a waste. Big myth is that all teeth have to be exactly the same. As one woodcutter pointed out, the chain will cut fine even if one tooth is completly missing, so if some are shorter, so what. If I've got a chipped tooth, I just file it down as much as necessary and catch up later as the rest of the chain wears.

>3 light strokes on each tooth generally does the job...

One thing I learned from the pros is to sharpen lightly, often. One guy I knows hits every tooth a couple of strokes at nearly every refueling. This way the chain is always sharp and the brief sharpening time makes a good safety break as well.

BTW, flip the bar every few refuelings as well for more even wear.

JKJ

Re: Chain Saw Filing Guide *LINK*

#15

Re: Chain Saw Filing Guide

Carole Valentine

>Well I can guarantee there was no tooth as short as they made them all! In fact, I have never had a single tooth appear shorter than any of the others - at least not that you can see with the naked eye. I flip my bar fairly often - always when I clean the gunk from my saw after use. I should keep my house as clean as my saw!!!! LOL

Re: Chain Saw Filing Guide *LINK*

#16

Re: Chain Saw Filing Guide - ACCKKK!

Carol - now in NC Nebraska

>Priorities, Carole, priorities!

Tools and shop waaaayyy before house.