Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

textureing examples

Posts

textureing examples

#1

textureing examples

john lucas

>I promised I would post these sample boards that I do for texturing experiments. I take one tool and see how many different ways I can come up with to produce a texture. This one is using 3 different carving tools. two small gouges and one knife. You can play endlessly with with these to produce all sorts of textures.


img

Re: textureing examples

#2

dremel texture examples

john lucas

>This was only done with a few of the 30 or more cutters that I have. The lines were done with a cutter that looks like a wheel, the holes are round ball cutters. These were all done with just those two.


img

Re: textureing examples

#3

leather tool examples 

john lucas

>


img

Re: textureing examples

#4

wire brush and wire wheels examples

john lucas

>The two on the left are Dremel engraver the rest are either wire wheels held in the drill press smaller wire wheels in the Dremel. I couldn't show the depth of the grain raising characteristics of wire wheels. It would take 2 photos to show that. Some were brass wheels and some were steel. They all produce a different texture.


img

Re: textureing examples

#5

pyrography

john lucas

>There isn't any limits on what you can do with pyrography. Make up a sample board and take one burner and just start to play. Drag the burner, push in and drag, or just burn one spot. Everything you do changes it.


img

Re: textureing examples

#6

Re: pyrography 

john lucas

>


img

Re: textureing examples

#7

Inspiring!

Jerry Hall

>Great methodology and creative variations. I don't often spend the time systematically exploring the range of possibilities when I have an idea. I just get on with it. The few times I have taken that time I have enjoyed the process, and it has led to some exciting results. Your approach encourages testing limits without the risk of producing an object that doesn't work, and feeling as though you have wasted a lot of time.

Thanks.

Re: textureing examples

#8

Re: Inspiring!

Bill Hale

>John

GREAT PICS

These are fine examples that should enspire many of us to try things we have not done before.

Good turning and be safe

Bill Hale in Show Low AZ.

Re: textureing examples

#9

Thank you, John.

Eddie Pacheco: San Jose, Ca.

>From your posts I know that you are kept pretty busy with your day job, family, and side job of selling your woodturnings. Thanks for taking the time to make, layout, and photograph these texturing examples. Now..If you could somehow find a way to kick down some of your talent to us, that would be cool.

Re: textureing examples

#10

Re: Thank you, John.

Don in Central Illinois

>When do you sleep? I haven't got into embellishments (yet) but this gives me food for thought. When I get the Dremel out, I may practice on scraps like this before I ruin a good turning.

Re: textureing examples

#11

Mike Stafford

An encyclopedia......

Mike Stafford

>What a terrific compendium of accumulated textures and ideas. I am assuming you label the back of the example piece with the name of the tool you used. Very nice. Thanks for the ideas.

Re: textureing examples

#12

Re: dremel texture examples

GaryG in MD

>I like (1,6) and (2,2). Very cool. Thanks John. ...Gary

Re: textureing examples

#13

Re: wire brush and wire wheels examples

GaryG in MD

>Very interesting. I'm going to have to try this. Sure beats sand blasting. I like (1,3) and (1,6) -- they seem to bring out the natural texture of the wood. ...Gary

Re: textureing examples

#14

The ones marked Dull

Keith Newton

>Is it recommended that you use a dull tool for the special effect, or you just think that the pattern is just dull?

Re: textureing examples

#15

Re: The ones marked Dull

john lucas

>Keith Actually I did that piece to show people the difference between a dull gouge and a sharp gouge. I suppose any of these textures could be called Dull if you use the wrong texture in the wrong way.

Re: textureing examples

#16

Re: An encyclopedia......

john lucas

>Mike They started off labeled but then I resawed the wood and used the other sides so now I will have to do it by memory if ever need one of those textures.

Re: textureing examples

#17

Re: wire brush and wire wheels examples

john lucas

>Gary one of the reasons I did this was to learn how the wire brushes work with the grain and against the grain. totally different affect. Another great affect is to use a course wire brush or wheel and then follow that up with a very fine wheel. It's kind of like free form carving where the carving follows the summer winter wood patterns. Then you can carry it further by hand sanding these areas.

Re: textureing examples

#18

Re: Thank you, John.

john lucas

>Don Turn a piece of scrap wood and cut some lines about 1/2" apart. Then practice texturing inside these lines. This will give you a good feel for how a band will appear on the side of the bowl or the edge of a platter.

Re: textureing examples

#19

Re: leather tool examples

Ken Grunke from SW WI

>This is really cool, John. All the examples are inspiring but the stamps especially so. There is one particular technique whose name escapes me where after the stamping is done, the surface is cut down to the depth of the stampings, which are then raised up by heat, steam, or just moisture--I can't remember. I played around with it using letter stamps and it was interesting, but the detail was a bit fuzzy from the moisture raising the grain. I just ran the piece under hot tap water.

Re: textureing examples

#20

good points...

GaryG in MD

>Lots of opportunities! Love it. I've got to try this.

Thanks John. ...Gary

Re: textureing examples

#21

Re: leather tool examples

Rick Pixley

>Art Liestman

Re: textureing examples

#22

Re: leather tool examples

john lucas

>Ken I don't remember what that technique is called either. I tried it and had trouble raising the dots to same height. I think it had to do with not stamping them to the same depth and probably the grain and density of the wood. I had planned to take a nail and solder a washer on it. Then grind this down to the length and shape I wanted. the washer would keep the nail penetrating the same depth each time.

I've never taken the time to finish that idea because I was a little dissatisfied with the raised grain problems. Steaming raised the bumps but also raises the grain and it was a pain to try and sand all that away. However I now have some of the 3M sanding stars and than might make it fast enough to be worth playing with again. Come to think of it I have a metal lathe now which should make creating the punch even easier. thanks for reminding me of this technique. I see a project in the works.

Re: textureing examples

#23

Re: leather tool examples

Arch

>Hi John & Ken, In Tennessee & Wisconsin it's called "pimpling". In Japan it's "ukiboi". For everywhere else it's just a pain in the neck! Arch

Re: textureing examples

#24

Re: leather tool examples

Ken Grunke from SW WI

>Hi, Arch, I'm sure John will agree with me that whatever this process is called, it's a pain in the @$$ no matter where you are. I played around with this last night with very mixed results, on a piece of maple. I used a nail set to punch a ring of circles around the wood. Didn't realize I had knocked it a bit off center in the chuck until raising the dots, which only showed up on one side!